commit 4f8ec11ba886a84a89d8fc2b84b6045f1b243f23
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Mon Mar 26 09:41:23 2012 -0400
Index entries for Amateur Radio
en-US/Amateur_Radio.xml | 134 +++++++++++++++++++++++++---------------------
1 files changed, 73 insertions(+), 61 deletions(-)
---
diff --git a/en-US/Amateur_Radio.xml b/en-US/Amateur_Radio.xml
index da3e6cf..006d89f 100644
--- a/en-US/Amateur_Radio.xml
+++ b/en-US/Amateur_Radio.xml
@@ -248,6 +248,9 @@
<primary>splat</primary>
</indexterm>
<indexterm>
+ <primary>Propagation</primary>
+ </indexterm>
+ <indexterm>
<primary>Longley-Rice</primary>
</indexterm>
<indexterm>
@@ -306,16 +309,57 @@
<section>
<title>svxlink-server</title>
-
+ <indexterm>
+ <primary>svxlink-server</primary>
+ </indexterm>
+ <indexterm>
+ <primary>Motorola QC2</primary>
+ </indexterm>
+ <indexterm>
+ <primary>DTMF</primary>
+ </indexterm>
+ <indexterm>
+ <primary>CTCSS</primary>
+ </indexterm>
+ <indexterm>
+ <primary>AVR</primary>
+ <secondary>ATmega8</secondary>
+ </indexterm>
+ <indexterm>
+ <primary>METAR</primary>
+ </indexterm>
+ <indexterm>
+ <primary>ICAO</primary>
+ </indexterm>
+ <indexterm>
+ <primary>PTT</primary>
+ </indexterm>
+ <indexterm>
+ <primary>Hamming</primary>
+ </indexterm>
+ <indexterm>
+ <primary>Propagation</primary>
+ </indexterm>
+ <indexterm>
+ <primary>Speex</primary>
+ </indexterm>
+ <indexterm>
+ <primary>Codec</primary>
+ <secondary>Speex</secondary>
+ </indexterm>
+ <indexterm>
+ <primary>Echolink</primary>
+ </indexterm>
+ <indexterm>
+ <primary>VOX</primary>
+ </indexterm>
<itemizedlist>
<listitem>
-
<para>
Added selective calling system Motorola QC2.
</para>
</listitem>
<listitem>
-
<para>
New feature: 1750Hz tone call muting. Use the 1750_MUTING
configuration variable in a local receiver configuration
@@ -324,7 +368,6 @@
</para>
</listitem>
<listitem>
-
<para>
Added a QSO recorder feature that can record all traffic on
the channel. The QSO recorder can be turned on and off using
@@ -333,7 +376,6 @@
</para>
</listitem>
<listitem>
-
<para>
The voice mail module now store the messages as WAV
files. Old messages will have to be removed or converted
@@ -343,7 +385,6 @@
</para>
</listitem>
<listitem>
-
<para>
Voice mail messages are now time limited to a maximum
time. Default is 10 seconds for the subject and two minutes
@@ -351,7 +392,6 @@
</para>
</listitem>
<listitem>
-
<para>
It is now possible to have a "local" subdirectory in the
events.d directory where the TCL files in the "local"
@@ -360,7 +400,6 @@
</para>
</listitem>
<listitem>
-
<para>
Added a threshold to the tone detector so that it is less
prone to trigger on silence. This was a problem when using
@@ -368,7 +407,6 @@
</para>
</listitem>
<listitem>
-
<para>
Implemented a signal level transmission mechanism based on
multiple tones, one for each signal level step, in the high
@@ -386,7 +424,6 @@
</para>
</listitem>
<listitem>
-
<para>
New feature: Tell repeater users that are not identifying to
identify themselvs. The time to wait for an identification,
@@ -399,7 +436,6 @@
</para>
</listitem>
<listitem>
-
<para>
New feature: The repeater can be told to activate again if
the squelch openes within a specified time from repeater
@@ -408,7 +444,6 @@
</para>
</listitem>
<listitem>
-
<para>
The TX_CTCSS feature have now been extended so that CTCSS
tone can be transmitted if there is incoming traffic from
@@ -419,7 +454,6 @@
</para>
</listitem>
<listitem>
-
<para>
New module, PropagationMonitor. The propagation monitor
module receive emails from
vhfdx.net (or
gooddx.net) and
@@ -427,7 +461,6 @@
</para>
</listitem>
<listitem>
-
<para>
New module, MetarInfo. Get METAR (weather) information from
predefined ICAO locations and announce the information on
@@ -435,14 +468,12 @@
</para>
</listitem>
<listitem>
-
<para>
A hamming window was added to the tone detector and DTMF
decoder to improve out-of-band audio rejection.
</para>
</listitem>
<listitem>
-
<para>
Now possible to issue commands to the core and to other
modules even when another module is active. This is achieved
@@ -453,13 +484,11 @@
</para>
</listitem>
<listitem>
-
<para>
The "connect by callsign" command changed from "*" to
"6*".
</para>
</listitem>
<listitem>
-
<para>
The help module can now accept commands when not active. It
will read back help for the given module ID. For example the
@@ -468,7 +497,6 @@
</para>
</listitem>
<listitem>
-
<para>
The parrot module can now accept commands when not
active. The only thing it can do is to read back the entered
@@ -477,7 +505,6 @@
</para>
</listitem>
<listitem>
-
<para>
The EchoLink module can now accept commands when not
active. The only command supported at the moment is "2",
@@ -485,7 +512,6 @@
</para>
</listitem>
<listitem>
-
<para>
Now users can check if there are any voice mail messages
available without first logging in. Idea from Martin
@@ -496,7 +522,6 @@
</para>
</listitem>
<listitem>
-
<para>
The DTMF repeater module can now accept commands when not
active. It will play back the entered digits. For example
@@ -504,7 +529,6 @@
</para>
</listitem>
<listitem>
-
<para>
A macro command may now be specified without a module
name. The colon separator is still required though. If no
@@ -513,7 +537,6 @@
</para>
</listitem>
<listitem>
-
<para>
It now is possible to include a hash mark in a macro command
by specifying 'H' in the command string. The 'H' will be
@@ -526,7 +549,6 @@
</para>
</listitem>
<listitem>
-
<para>
Now possible to link more than one logic core together. The
LOGIC1 and LOGIC2 configuration variables have been replaced
@@ -534,7 +556,6 @@
</para>
</listitem>
<listitem>
-
<para>
New config variable MUTE_TX_ON_RX for a NetUplink in
RemoteTrx. This will stop the transmitter from transmitting
@@ -542,7 +563,6 @@
</para>
</listitem>
<listitem>
-
<para>
Support for selcall activated functions added. New config
variables: Logic/SEL5_MACRO_RANGE,
@@ -552,14 +572,12 @@
</para>
</listitem>
<listitem>
-
<para>
New module SelCallEnc. This module is used to send selective
calling sequences out on the frequency upon user request.
</para>
</listitem>
<listitem>
-
<para>
One RemoteTrx application can now be used to run more than
one remote transceiver. Previously two RemoteTrx instances
@@ -575,7 +593,6 @@
</para>
</listitem>
<listitem>
-
<para>
Now possible to set a PTT hangtime for the local tx
type. This can be good to have on a link transmitter in
@@ -587,14 +604,12 @@
</para>
</listitem>
<listitem>
-
<para>
The DTMF repeater module now wait until all announcements
have been played before retransmitting the digits.
</para>
</listitem>
<listitem>
-
<para>
The EchoLink module can now use the Speex audio codec on
connections between two SvxLink nodes which improves the
@@ -602,7 +617,6 @@
</para>
</listitem>
<listitem>
-
<para>
Added a fallback repeater mode to the RemoteTrx which can be
used if using it as both RX and TX for a repeater. If the
@@ -612,20 +626,17 @@
</para>
</listitem>
<listitem>
-
<para>
Configuration variable VOX_LIMIT has been renamed to VOX_THRESH.
</para>
</listitem>
<listitem>
-
<para>
SvxLink system global configuration files are now by default
stored in the /etc/svxlink directory.
</para>
</listitem>
<listitem>
-
<para>
New directory layout for event scripts and sound clips. The
main event scripts are now stored in
@@ -636,14 +647,12 @@
</para>
</listitem>
<listitem>
-
<para>
New configuration variable DEFAULT_LANG that points out the
default language to use.
</para>
</listitem>
<listitem>
-
<para>
New squelch detector type: EVDEV. This squelch detector read
events from a /dev/input/eventX device node. This can for
@@ -654,72 +663,75 @@
</listitem>
</itemizedlist>
</section>
- <section>
-
+
+ <section>
<title>trustedqsl</title>
-
+ <indexterm>
+ <primary>trustedqsl</primary>
+ </indexterm>
+ <indexterm>
+ <primary>QSL</primary>
+ </indexterm>
+ <indexterm>
+ <primary>Zone</primary>
+ <secondary>ITU</secondary>
+ </indexterm>
+ <indexterm>
+ <primary>ITU Zone</primary>
+ <secondary>Validating</secondary>
+ </indexterm>
<itemizedlist>
<listitem>
-
<para>
When asking for the password to unlock a private key, say
what callsign it's for.
</para>
</listitem>
<listitem>
-
<para>
Remember certificate requests and assist the user with
importing the .tq6.
</para>
</listitem>
<listitem>
-
<para>
Prompt user to save their certificate after importing a .tq6
signed certificate.
</para>
</listitem>
<listitem>
-
<para>
Suppress display of superceded certificates, controlled by a
tqslcert preference setting.
</para>
</listitem>
<listitem>
-
<para>
Fix windows wxWidgets crashes with several wizards (cert
renew, new cert, etc.)
</para>
</listitem>
<listitem>
-
<para>
Add checkbox to allow bypassing state selection.
</para>
</listitem>
<listitem>
-
<para>
Fix crash on Windows when new certificate request wizard is started.
</para>
</listitem>
<listitem>
-
<para>
Added support for validating zone numbers and requiring them.
</para>
</listitem>
<listitem>
-
<para>
Allowed batch mode (-x) without displaying windows
</para>
</listitem>
<listitem>
-
<para>
When double-clicking an entry on the "Edit Station
Locations" dialog, open that entry for edit, don't just
@@ -727,20 +739,17 @@
</para>
</listitem>
<listitem>
-
<para>
Change the "OK" button on the "Edit Station Locations"
dialog to "Close" as that's what it does.
</para>
</listitem>
<listitem>
-
<para>
Update password dialogs to enable "enter" to activate when possible.
</para>
</listitem>
<listitem>
-
<para>
Add "-p <password>" and "-o
<output-file>"
arguments to tqsl.
@@ -748,20 +757,26 @@
</listitem>
</itemizedlist>
</section>
+
<section>
-
<title>xdemorse</title>
-
+ <indexterm>
+ <primary>xdemorse</primary>
+ </indexterm>
+ <indexterm>
+ <primary>CW</primary>
+ </indexterm>
+ <indexterm>
+ <primary>CAT code</primary>
+ </indexterm>
<itemizedlist>
<listitem>
-
<para>
Now uses ALSA sound interface instead of the older (and
typically not working) OSS
</para>
</listitem>
<listitem>
-
<para>
Several changes to the transceiver CAT code to deal with
error conditions better and to be enabled by the "Receive"
@@ -770,20 +785,17 @@
</para>
</listitem>
<listitem>
-
<para>
Increased the height of the 'scope' and waterfall displays
to improve resolution.
</para>
</listitem>
<listitem>
-
<para>
Separated the 'Auto Speed' check-button into its own frame.
</para>
</listitem>
<listitem>
-
<para>
Changed the Mark/Space detection scheme to measuring the
average value of the Goertzel detector's slope.