po/pl.po | 1110 ++++++++++++++++++++++++--------------------------------------- 1 file changed, 429 insertions(+), 681 deletions(-)
New commits: commit d8e96f735f1355c23e5dc5e3f890371f33c99da9 Author: Piotr Drąg piotrdrag@gmail.com Date: Thu Feb 5 21:56:28 2009 +0000
Updated Polish translation
Transmitted-via: Transifex (translate.fedoraproject.org)
diff --git a/po/pl.po b/po/pl.po index 43a5994..646ae7f 100644 --- a/po/pl.po +++ b/po/pl.po @@ -6,8 +6,8 @@ msgid "" msgstr "" "Project-Id-Version: pl\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2008-11-15 19:11-0500\n" -"PO-Revision-Date: 2008-11-15 20:52-0500\n" +"POT-Creation-Date: 2009-02-01 19:30-0500\n" +"PO-Revision-Date: 2009-02-05 22:53+0100\n" "Last-Translator: Piotr Drąg piotrdrag@gmail.com\n" "Language-Team: Polish pl@li.org\n" "MIME-Version: 1.0\n" @@ -2804,16 +2804,10 @@ msgstr "" "Kiedy używasz silnika Xine, można tymczasowo używać silnika GStreamer. Aby " "użyć silnika GStreamer, wykonaj następujące polecenie:"
-#: en_US/Multimedia.xml:47(programlisting) +#: en_US/Multimedia.xml:48(userinput) #, no-wrap -msgid "" -"\n" -" su -c 'totem-backend -b gstreamer'\n" -" " -msgstr "" -"\n" -" su -c 'totem-backend -b gstreamer'\n" -" " +msgid "su -c 'totem-backend -b gstreamer'" +msgstr "su -c 'totem-backend -b gstreamer'"
#: en_US/Multimedia.xml:52(title) msgid "Ogg and Xiph.Org foundation formats" @@ -4445,25 +4439,27 @@ msgstr "Informacje o instalacji"
#: en_US/Installation_notes.xml:7(title) msgid "" -"To learn how to install Fedora, refer to <ulink url="http://docs." -"fedoraproject.org/install-guide/"/>" +"To learn how to install Fedora, refer to to the Fedora Installation Guide" msgstr "" -"Aby dowiedzieć się, jak zainstalować Fedorę, zobacz <ulink url="http://docs." -"fedoraproject.org/install-guide/"/>" +"Aby dowiedzieć się, jak zainstalować Fedorę, zobacz Przewodnik po instalacji " +"Fedory"
-#: en_US/Installation_notes.xml:10(para) +#: en_US/Installation_notes.xml:9(para) msgid "" -"If you encounter a problem or have a question during installation that is " -"not covered in these release notes, refer to <ulink url="http://www." -"fedoraproject.org/wiki/FAQ"/> and <ulink url="http://www.fedoraproject.org/" -"wiki/Bugs/Common"/>." +"Refer to <ulink url="http://docs.fedoraproject.org/install-guide/%5C%22/%3E for " +"full instructions on installing Fedora. If you encounter a problem or have a " +"question during installation that is not covered in these release notes, " +"refer to <ulink url="http://www.fedoraproject.org/wiki/FAQ%5C%22/%3E and <ulink " +"url="http://www.fedoraproject.org/wiki/Bugs/Common%5C%22/%3E." msgstr "" -"Jeśli napotkasz problem lub masz pytanie związane z instalacją, które nie " -"zostało opisane w tych informacjach o wydaniu, zobacz <ulink url="http://" -"www.fedoraproject.org/wiki/FAQ"/> i <ulink url="http://www.fedoraproject." -"org/wiki/Bugs/Common"/>." +"Przejdź do <ulink url="http://docs.fedoraproject.org/install-guide/%5C%22/%3E, " +"aby uzyskać pełne instrukcje instalowania Fedory. Jeśli napotkasz problem " +"lub masz pytanie związane z instalacją, które nie zostało opisane w tych " +"informacjach o wydaniu, zobacz <ulink url="http://www.fedoraproject.org/" +"wiki/FAQ"/> i <ulink url="http://www.fedoraproject.org/wiki/Bugs/Common%5C%22/" +">."
-#: en_US/Installation_notes.xml:17(para) +#: en_US/Installation_notes.xml:18(para) msgid "" "<application>Anaconda</application> is the name of the Fedora installer. " "This section outlines issues related to <application>Anaconda</application> " @@ -4473,15 +4469,15 @@ msgstr "" "omawia te problemy, które są związane z <application>Anacondą</application> " "oraz instalowaniem Fedory 10."
-#: en_US/Installation_notes.xml:22(title) +#: en_US/Installation_notes.xml:23(title) msgid "Installation media" msgstr "Nośnik instalacyjny"
-#: en_US/Installation_notes.xml:24(title) +#: en_US/Installation_notes.xml:25(title) msgid "Fedora DVD ISO image is a large file." msgstr "Obraz ISO DVD Fedory jest dużym plikiem."
-#: en_US/Installation_notes.xml:25(para) +#: en_US/Installation_notes.xml:26(para) msgid "" "If you intend to download the Fedora DVD ISO image, keep in mind that not " "all file downloading tools can accommodate files larger than 2 GiB in size." @@ -4490,7 +4486,7 @@ msgstr "" "narzędzia służące do pobierania plików są przystosowane do plików o " "rozmiarze większym niż 2 GB."
-#: en_US/Installation_notes.xml:28(para) +#: en_US/Installation_notes.xml:29(para) msgid "" "The programs <command>wget</command> 1.9.1-16 and above, <command>curl</" "command>, and <command>ncftpget</command> do not have this limitation, and " @@ -4505,7 +4501,7 @@ msgstr "" "pobieraniu i używaniu plików torrent, odwiedź <ulink url="http://torrent." "fedoraproject.org/"/>."
-#: en_US/Installation_notes.xml:36(para) +#: en_US/Installation_notes.xml:37(para) msgid "" "<application>Anaconda</application> asks if it should verify the " "installation medium when <menuchoice><guimenuitem>Install or upgrade an " @@ -4517,7 +4513,7 @@ msgstr "" "istniejący system</guimenuitem></menuchoice> podczas uruchamiania z nośnika " "instalacyjnego."
-#: en_US/Installation_notes.xml:41(para) +#: en_US/Installation_notes.xml:42(para) msgid "" "For Fedora Live media, press any key during the initial boot countdown, to " "display a boot option menu. Select <menuchoice><guimenuitem>Verify and boot</" @@ -4539,11 +4535,11 @@ msgstr "" "nośnik, wybierz <menuchoice><guimenuitem>wysuń</guimenuitem></menuchoice>, " "aby wysunąć włożony nośnik, i zastąp go nośnikiem, który chcesz przetestować."
-#: en_US/Installation_notes.xml:54(para) +#: en_US/Installation_notes.xml:55(para) msgid "Perform this test for any new installation or live medium." msgstr "Wykonaj ten test dla każdego nowego nośnika instalacyjnego lub Live."
-#: en_US/Installation_notes.xml:57(para) +#: en_US/Installation_notes.xml:58(para) msgid "" "The Fedora Project strongly recommends that you perform this test before " "reporting any installation-related bugs. Many of the bugs reported are " @@ -4553,7 +4549,7 @@ msgstr "" "dotyczących instalacji. Wiele zgłaszanych błędów są spowodowane niewłaściwie " "nagranymi płytami CD lub DVD."
-#: en_US/Installation_notes.xml:61(para) +#: en_US/Installation_notes.xml:62(para) msgid "" "In rare cases, the testing procedure may report some usable discs as faulty. " "This result is often caused by disc writing software that does not include " @@ -4563,11 +4559,11 @@ msgstr "" "płyty jako wadliwe. Często jest to spowodowane przez oprogramowanie do " "nagrywania płyt, które nie dołącza części nagrywanego pliku ISO."
-#: en_US/Installation_notes.xml:66(title) +#: en_US/Installation_notes.xml:67(title) msgid "BitTorrent Automatically Verifies File Integrity." msgstr "BitTorrent automatycznie sprawdza integralność plików."
-#: en_US/Installation_notes.xml:67(para) +#: en_US/Installation_notes.xml:68(para) msgid "" "If you use BitTorrent, any files you download are automatically validated. " "If your file completes downloading you do not need to check it. Once you " @@ -4579,7 +4575,7 @@ msgstr "" "lub DVD, wciąż powinieneś użyć <command>mediacheck</command>, aby sprawdzić " "integralność nośnika."
-#: en_US/Installation_notes.xml:73(para) +#: en_US/Installation_notes.xml:74(para) msgid "" "Another reason for a failure during installation is faulty memory. To " "perform memory testing before you install Fedora, press any key to enter the " @@ -4597,7 +4593,7 @@ msgstr "" "application>. Testowanie pamięci <application>Memtest86</application> trwa, " "dopóki nie zostanie wciśnięty klawisz <keycap>Esc</keycap>."
-#: en_US/Installation_notes.xml:83(para) +#: en_US/Installation_notes.xml:84(para) msgid "" "Fedora 10 supports graphical FTP and HTTP installations. However, the " "installer image must either fit in RAM or appear on local storage, such as " @@ -4617,11 +4613,11 @@ msgstr "" "instalator tekstowy. Jeśli wolisz używać instalatora tekstowego, wpisz " "<userinput>linux text</userinput> po znaku zachęty <prompt>boot:</prompt>."
-#: en_US/Installation_notes.xml:94(title) +#: en_US/Installation_notes.xml:95(title) msgid "Changes in Anaconda" msgstr "Zmiany w Anacondzie"
-#: en_US/Installation_notes.xml:97(para) +#: en_US/Installation_notes.xml:98(para) msgid "" "<application>NetworkManager</application> for Networking -- " "<application>Anaconda</application> is now using " @@ -4640,7 +4636,7 @@ msgstr "" "sieci, kiedy jest to niezbędne podczas instalacji. Ustawienia użyte podczas " "instalacji są następnie zapisywane w systemie."
-#: en_US/Installation_notes.xml:108(para) +#: en_US/Installation_notes.xml:109(para) msgid "" "For more information, refer to <ulink url="http://www.fedoraproject.org/" "wiki/Anaconda/Features/NetConfigForNM"/>." @@ -4648,7 +4644,7 @@ msgstr "" "Aby dowiedzieć się więcej, zobacz <ulink url="http://www.fedoraproject.org/" "wiki/Anaconda/Features/NetConfigForNM"/>."
-#: en_US/Installation_notes.xml:113(para) +#: en_US/Installation_notes.xml:114(para) msgid "" "When using <filename>netinst.iso</filename> to boot the installer, " "<application>Anaconda</application> defaults to using the Fedora mirrorlist " @@ -4678,29 +4674,31 @@ msgstr "" "computeroutput> na <ulink url="http://fedoraproject.org/wiki/Anaconda/" "Options"/>."
-#: en_US/Installation_notes.xml:134(title) +#: en_US/Installation_notes.xml:135(title) msgid "Installation related issues" msgstr "Problemy związane z instalacją"
-#: en_US/Installation_notes.xml:136(title) +#: en_US/Installation_notes.xml:137(title) msgid "PXE booting from a <filename>.iso</filename>" msgstr "Uruchamianie PXE z pliku <filename>.iso</filename>"
-#: en_US/Installation_notes.xml:137(para) +#: en_US/Installation_notes.xml:138(para) msgid "" "When PXE booting and using a <filename>.iso</filename> file mounted via NFS " -"for the installation media, add <userinput>method=nfsiso:server:/path</" -"userinput> to the command line. This is a new requirement." +"for the installation media, add <userinput>repo=nfs:server:/path/</" +"userinput> to the command line. The install.img file also needs to be " +"extracted and/or placed into the nfs:server:/path/images/ directory." msgstr "" "Podczas uruchamiania PXE i używania pliku <filename>.iso</filename> jako " -"nośnika instalacji zamontowanego przez NFS, dodaj <userinput>method=nfsiso:" -"serwer:/ścieżka</userinput> do wiersza poleceń. Jest to nowe wymaganie." +"nośnika instalacji zamontowanego przez NFS, dodaj <userinput>repo=nfs:" +"serwer:/ścieżka/</userinput> do wiersza poleceń. Plik install.img musi " +"zostać rozpakowany i/lub umieszczony w folderze nfs:serwer:/ścieżka/images/."
-#: en_US/Installation_notes.xml:143(title) +#: en_US/Installation_notes.xml:144(title) msgid "IDE device names" msgstr "Nazwy urządzeń IDE"
-#: en_US/Installation_notes.xml:144(para) +#: en_US/Installation_notes.xml:145(para) msgid "" "Use of <filename>/dev/hdX</filename> on i386 and x86_64 for IDE drives " "changed to <filename>/dev/sdX</filename> in Fedora 7. If you are upgrading " @@ -4713,11 +4711,11 @@ msgstr "" "tym, jak ważne są etykiety urządzeń podczas aktualizacji oraz o " "ograniczeniach partycji."
-#: en_US/Installation_notes.xml:151(title) +#: en_US/Installation_notes.xml:152(title) msgid "IDE RAID" msgstr "RAID IDE"
-#: en_US/Installation_notes.xml:152(para) +#: en_US/Installation_notes.xml:153(para) msgid "" "Not all IDE RAID controllers are supported. If your RAID controller is not " "yet supported by <systemitem class="daemon">dmraid</systemitem>, you may " @@ -4730,11 +4728,11 @@ msgstr "" "linuksowego, programowego RAID. W przypadku obsługiwanych kontrolerów " "skonfiguruj funkcje RAID w BIOS-ie komputera."
-#: en_US/Installation_notes.xml:160(title) +#: en_US/Installation_notes.xml:161(title) msgid "Multiple NICs and PXE installation" msgstr "Wielokrotne instalacje NIC i PXE"
-#: en_US/Installation_notes.xml:161(para) +#: en_US/Installation_notes.xml:162(para) msgid "" "Some servers with multiple network interfaces may not assign eth0 to the " "first network interface as BIOS knows it, which can cause the installer to " @@ -4757,7 +4755,7 @@ msgstr "" "IPAPPEND 2 APPEND\n" "\t ksdevice=bootif"
-#: en_US/Installation_notes.xml:171(para) +#: en_US/Installation_notes.xml:170(para) msgid "" "The configuration options above causes the installer to use the same network " "interface as BIOS and PXE use. You can also use the following option:" @@ -4766,12 +4764,12 @@ msgstr "" "interfejsu sieciowego, który jest używany przez BIOS i PXE. Można też użyć " "następującej opcji:"
-#: en_US/Installation_notes.xml:175(computeroutput) +#: en_US/Installation_notes.xml:173(computeroutput) #, no-wrap msgid "ksdevice=link" msgstr "ksdevice=link"
-#: en_US/Installation_notes.xml:177(para) +#: en_US/Installation_notes.xml:174(para) msgid "" "This option causes the installer to use the first network device it finds " "that is linked to a network switch." @@ -4779,11 +4777,11 @@ msgstr "" "Ta opcja powoduje użycie przez instalator pierwszego urządzenia sieciowego, " "który jest powiązany z przełącznikiem sieciowym."
-#: en_US/Installation_notes.xml:182(title) +#: en_US/Installation_notes.xml:179(title) msgid "Upgrade related issues" msgstr "Problemy związane z aktualizacją"
-#: en_US/Installation_notes.xml:183(para) +#: en_US/Installation_notes.xml:180(para) msgid "" "Refer to <ulink url="http://fedoraproject.org/wiki/DistributionUpgrades%5C%22/%3E " "for detailed recommended procedures for upgrading Fedora." @@ -4791,11 +4789,11 @@ msgstr "" "Zobacz <ulink url="http://fedoraproject.org/wiki/DistributionUpgrades%5C%22/%3E, " "aby uzyskać szczegółowe zalecane procedury aktualizowania Fedory."
-#: en_US/Installation_notes.xml:187(title) +#: en_US/Installation_notes.xml:184(title) msgid "SCSI driver partition limits" msgstr "Ograniczenie partycji sterownika SCSI"
-#: en_US/Installation_notes.xml:188(para) +#: en_US/Installation_notes.xml:185(para) msgid "" "Whereas older IDE drivers supported up to 63 partitions per device, SCSI " "devices are limited to 15 partitions per device. <application>Anaconda</" @@ -4810,7 +4808,7 @@ msgstr "" "systemitem> w ten sam sposób, co reszta Fedory, więc nie jest w stanie " "wykryć więcej niż 15 partycji podczas procesu instalacji lub aktualizacji."
-#: en_US/Installation_notes.xml:195(para) +#: en_US/Installation_notes.xml:192(para) msgid "" "If you are upgrading a system with more than 15 partitions, you may need to " "migrate the disk to Logical Volume Management (LVM). This restriction may " @@ -4824,11 +4822,11 @@ msgstr "" "Większość nowoczesnych dystrybucji Linuksa obsługuje LVM, a sterowniki są " "dostępne także dla innych systemów operacyjnych."
-#: en_US/Installation_notes.xml:203(title) +#: en_US/Installation_notes.xml:200(title) msgid "Disk partitions must be labeled" msgstr "Partycje dysku muszą mieć etykiety"
-#: en_US/Installation_notes.xml:204(para) +#: en_US/Installation_notes.xml:201(para) msgid "" "A change in the way that the Linux kernel handles storage devices means that " "device names such as <filename>/dev/hdX</filename> or <filename>/dev/sdX</" @@ -4838,7 +4836,8 @@ msgid "" "then <application>Anaconda</application> presents a warning indicating that " "partitions need to be labelled and that the upgrade can not proceed. Systems " "that use Logical Volume Management (LVM) and the device mapper usually do " -"not require relabeling." +"not require relabeling. One exception is mirrored LVM partitions, where the " +"UUIDs are identical. In that case, the partitions must be labeled." msgstr "" "Zmiana w sposobie, w jaki jądro Linuksa obsługuje urządzenia pamięci masowej " "oznacza, że nazwy urządzeń, takie jak <filename>/dev/hdX</filename> lub " @@ -4846,15 +4845,17 @@ msgstr "" "wcześniejszych wydaniach. <application>Anaconda</application> rozwiązuje ten " "problem przez używanie etykiet partycji lub UUID do wyszukiwania urządzeń. " "Jeśli ich nie ma, <application>Anaconda</application> wyświetla ostrzeżenie " -"wskazujące, że partycjom muszą zostać nadane etykiety i instalacja nie może " -"być kontynuowana. Systemy używające Zarządzania dyskami logicznymi (LVM) i " -"mapera urządzeń zwykle nie wymagają ponownego nadania etykiet." +"wskazujące, że partycjom muszą zostać nadane etykiety i aktualizacja nie " +"może być kontynuowana. Systemy używające Zarządzania dyskami logicznymi " +"(LVM) i mapera urządzeń zwykle nie wymagają ponownego nadania etykiet. " +"Jedynym wyjątkiem są lustrzane partycje LVM, których UUID są identyczne. W " +"takim wypadku partycjom należy nadać etykiety."
-#: en_US/Installation_notes.xml:216(title) +#: en_US/Installation_notes.xml:215(title) msgid "To check disk partition labels" msgstr "Aby sprawdzić etykiety partycji dysku"
-#: en_US/Installation_notes.xml:217(para) +#: en_US/Installation_notes.xml:216(para) msgid "" "To view partition labels, boot the existing Fedora installation, and enter " "the following at a terminal prompt:" @@ -4862,12 +4863,12 @@ msgstr "" "Aby wyświetlić etykiety partycji, uruchom istniejącą instalację Fedory i " "podaj następujące polecenie po znaku zachęty terminala:"
-#: en_US/Installation_notes.xml:221(userinput) +#: en_US/Installation_notes.xml:219(userinput) #, no-wrap msgid "/sbin/blkid" msgstr "/sbin/blkid"
-#: en_US/Installation_notes.xml:223(para) +#: en_US/Installation_notes.xml:220(para) msgid "" "Confirm that each volume line in the list has a <computeroutput>LABEL=</" "computeroutput> value, as shown below:" @@ -4875,7 +4876,7 @@ msgstr "" "Potwierdź, że każdy wiersz woluminu na liście posiada wartość " "<computeroutput>LABEL=</computeroutput>, jak pokazano niżej:"
-#: en_US/Installation_notes.xml:227(computeroutput) +#: en_US/Installation_notes.xml:223(computeroutput) #, no-wrap msgid "" "/dev/hdd1: LABEL="/boot"\n" @@ -4886,22 +4887,22 @@ msgstr "" "\t UUID="ec6a9d6c-6f05-487e-a8bd-a2594b854406" SEC_TYPE="ext2"\n" "\t TYPE="ext3" "
-#: en_US/Installation_notes.xml:233(title) +#: en_US/Installation_notes.xml:228(title) msgid "To set disk partition labels" msgstr "Aby ustawić etykiety partycji dysku"
-#: en_US/Installation_notes.xml:234(para) +#: en_US/Installation_notes.xml:229(para) msgid "" "For ext2 and ext3 partitions without a label, use the following command:" msgstr "" "W przypadku partycji ext2 i ext3 bez etykiet, wykonaj następujące polecenie:"
-#: en_US/Installation_notes.xml:237(userinput) +#: en_US/Installation_notes.xml:231(userinput) #, no-wrap msgid "su -c 'e2label /dev/example f7-slash'" msgstr "su -c 'e2label /dev/example f7-slash'"
-#: en_US/Installation_notes.xml:239(para) +#: en_US/Installation_notes.xml:232(para) msgid "" "For a VFAT file system use <command>dosfslabel</command> from the " "<package>dosfstools</package> package, and for NTFS file system use " @@ -4915,11 +4916,11 @@ msgstr "" "uruchomisz ponownie komputer, zaktualizuj także wpisy montowania systemów " "plików i wpis jądra root GRUB-a."
-#: en_US/Installation_notes.xml:247(title) +#: en_US/Installation_notes.xml:240(title) msgid "Update the file system mount entries" msgstr "Zaktualizuj wpisy montowania systemów plików"
-#: en_US/Installation_notes.xml:248(para) +#: en_US/Installation_notes.xml:241(para) msgid "" "If any file system labels were added or modified, then the device entries in " "<filename>/etc/fstab</filename> must be adjusted to match:" @@ -4928,20 +4929,16 @@ msgstr "" "wpisy urządzeń w <filename>/etc/fstab</filename> muszą zostać dostosowane, " "aby pasowały:"
-#: en_US/Installation_notes.xml:252(userinput) +#: en_US/Installation_notes.xml:244(userinput) #, no-wrap -msgid "" -"su -c 'cp /etc/fstab /etc/fstab.orig' su -c 'gedit\n" -"\t /etc/fstab'" -msgstr "" -"su -c 'cp /etc/fstab /etc/fstab.orig' su -c 'gedit\n" -"\t /etc/fstab'" +msgid "su -c 'cp /etc/fstab /etc/fstab.orig' su -c 'gedit /etc/fstab'" +msgstr "su -c 'cp /etc/fstab /etc/fstab.orig' su -c 'gedit /etc/fstab'"
-#: en_US/Installation_notes.xml:255(para) +#: en_US/Installation_notes.xml:245(para) msgid "An example of a mount by label entry is:" msgstr "Przykład montowania przez wpis etykiety:"
-#: en_US/Installation_notes.xml:257(computeroutput) +#: en_US/Installation_notes.xml:246(computeroutput) #, no-wrap msgid "" "LABEL=f7-slash / ext3 defaults 1\n" @@ -4950,11 +4947,11 @@ msgstr "" "LABEL=f7-slash / ext3 defaults 1\n" "\t 1"
-#: en_US/Installation_notes.xml:262(title) +#: en_US/Installation_notes.xml:250(title) msgid "Update the <filename>grub.conf</filename> kernel root entry" msgstr "Zaktualizuj wpis root jądra <filename>grub.conf</filename>"
-#: en_US/Installation_notes.xml:264(para) +#: en_US/Installation_notes.xml:252(para) msgid "" "If the label for the <filename>/</filename> (root) file system was modified, " "the kernel boot parameter in the grub configuration file must also be " @@ -4964,16 +4961,16 @@ msgstr "" "zmodyfikowana, parametr startowy jądra w pliku konfiguracji GRUB-a także " "musi zostać zmodyfikowany:"
-#: en_US/Installation_notes.xml:268(userinput) +#: en_US/Installation_notes.xml:255(userinput) #, no-wrap msgid "su -c 'gedit /boot/grub/grub.conf'" msgstr "su -c 'gedit /boot/grub/grub.conf'"
-#: en_US/Installation_notes.xml:270(para) +#: en_US/Installation_notes.xml:256(para) msgid "A matching example kernel grub line is:" msgstr "Pasujący przykład wiersza jądra GRUB-a to:"
-#: en_US/Installation_notes.xml:272(computeroutput) +#: en_US/Installation_notes.xml:257(computeroutput) #, no-wrap msgid "" "kernel /vmlinuz-2.6.20-1.2948.fc6 ro\n" @@ -4982,11 +4979,11 @@ msgstr "" "kernel /vmlinuz-2.6.20-1.2948.fc6 ro\n" "\t root=LABEL=f7-slash rhgb quiet"
-#: en_US/Installation_notes.xml:277(title) +#: en_US/Installation_notes.xml:261(title) msgid "Test changes made to labels" msgstr "Przetestuj zmiany etykiet"
-#: en_US/Installation_notes.xml:278(para) +#: en_US/Installation_notes.xml:262(para) msgid "" "If partition labels were adjusted, or the <filename>/etc/fstab</filename> " "file modified, then boot the existing Fedora installation to confirm that " @@ -5000,11 +4997,11 @@ msgstr "" "można się zalogować. Kiedy skończysz, uruchom ponownie z nośnika " "instalacyjnego, aby uruchomić instalator i zacząć aktualizację."
-#: en_US/Installation_notes.xml:287(title) +#: en_US/Installation_notes.xml:271(title) msgid "Upgrades versus fresh installations" msgstr "Aktualizacje kontra świeże instalacje"
-#: en_US/Installation_notes.xml:288(para) +#: en_US/Installation_notes.xml:272(para) msgid "" "In general, fresh installations are recommended over upgrades. This is " "particularly true for systems that include software from third-party " @@ -5019,7 +5016,7 @@ msgstr "" "Fedora. Jeśli mimo wszystko zdecydujesz się na wykonanie aktualizacji, " "poniższe informacje mogą być pomocne:"
-#: en_US/Installation_notes.xml:294(para) +#: en_US/Installation_notes.xml:278(para) msgid "" "Before you upgrade, back up the system completely. In particular, preserve " "<filename>/etc</filename>, <filename>/home</filename>, and possibly " @@ -5036,11 +5033,11 @@ msgstr "" "wrócić. W takim przypadku utwórz alternatywny nośnik startowy, taki jak " "dyskietka startowa GRUB-a."
-#: en_US/Installation_notes.xml:303(title) +#: en_US/Installation_notes.xml:287(title) msgid "Configuration backups" msgstr "Kopie zapasowe konfiguracji"
-#: en_US/Installation_notes.xml:304(para) +#: en_US/Installation_notes.xml:288(para) msgid "" "Backups of configurations in <filename>/etc</filename> are also useful in " "reconstructing system settings after a fresh installation." @@ -5048,16 +5045,16 @@ msgstr "" "Kopie zapasowe konfiguracji w <filename>/etc</filename> są również użyteczne " "w rekonstruowaniu ustawień systemu po świeżej instalacji."
-#: en_US/Installation_notes.xml:310(para) +#: en_US/Installation_notes.xml:294(para) msgid "After you complete the upgrade, run the following command:" msgstr "Po zakończeniu aktualizacji wykonaj następujące polecenie:"
-#: en_US/Installation_notes.xml:313(userinput) +#: en_US/Installation_notes.xml:296(userinput) #, no-wrap msgid "rpm -qa --last > RPMS_by_Install_Time.txt" msgstr "rpm -qa --last > RPM-y_wg_czasu_instalacji.txt"
-#: en_US/Installation_notes.xml:315(para) +#: en_US/Installation_notes.xml:297(para) msgid "" "Inspect the end of the output for packages that pre-date the upgrade. Remove " "or upgrade those packages from third-party repositories, or otherwise deal " @@ -5072,16 +5069,16 @@ msgstr "" "repozytoriach. Aby wyświetlić listę tych pakietów, użyj następującego " "polecenia:"
-#: en_US/Installation_notes.xml:322(userinput) +#: en_US/Installation_notes.xml:303(userinput) #, no-wrap msgid "su -c 'yum list extras'" msgstr "su -c 'yum list extras'"
-#: en_US/Installation_notes.xml:327(title) +#: en_US/Installation_notes.xml:307(title) msgid "Kickstart HTTP issue" msgstr "Problem z kickstartem przez HTTP"
-#: en_US/Installation_notes.xml:328(para) +#: en_US/Installation_notes.xml:308(para) msgid "" "When using a Kickstart configuration file via HTTP, kickstart file retrieval " "may fail with an error that indicates the file could not be retrieved. Click " @@ -5095,12 +5092,12 @@ msgstr "" "ten błąd. Jako obejście błędu użyj jednej z pozostałych obsługiwanych metod " "pobierania konfiguracji kickstart."
-#: en_US/Installation_notes.xml:336(title) +#: en_US/Installation_notes.xml:316(title) msgid "Firstboot requires creation of non-root user" msgstr "" "Podczas pierwszego uruchomienia wymagane jest utworzenie zwykłego użytkownika"
-#: en_US/Installation_notes.xml:337(para) +#: en_US/Installation_notes.xml:317(para) msgid "" "The <application>Firstboot</application> application requires the creation " "of a non-root user for the system. This is to support <systemitem class=" @@ -5111,7 +5108,7 @@ msgstr "" "zwykłego użytkownika systemu. <systemitem class="daemon">GDM</systemitem> " "nie pozwala już na logowanie użytkownika root do środowiska graficznego."
-#: en_US/Installation_notes.xml:341(para) +#: en_US/Installation_notes.xml:321(para) msgid "" "If a network authentication mechanism is chosen during installation, " "<application>Firstboot</application> does not require creating a non-root " @@ -5698,12 +5695,12 @@ msgstr "" "guimenuitem>, aby znaleźć i zainstalować <package>liveusb-creator</package>. " "Aby zainstalować używając <command>yuma</command>:"
-#: en_US/Fedora_Live_images.xml:58(userinput) +#: en_US/Fedora_Live_images.xml:57(userinput) #, no-wrap msgid "su -c 'yum install liveusb-creator'" msgstr "su -c 'yum install liveusb-creator'"
-#: en_US/Fedora_Live_images.xml:60(para) +#: en_US/Fedora_Live_images.xml:58(para) msgid "" "Instead of the graphical tool, you can use the command line interface from " "the <package>livecd-tools</package> package. Then, run the <command>livecd-" @@ -5713,14 +5710,14 @@ msgstr "" "pakietu <package>livecd-tools</package>. Wykonaj skrypt <command>livecd-iso-" "to-disk</command>:"
-#: en_US/Fedora_Live_images.xml:63(userinput) +#: en_US/Fedora_Live_images.xml:61(userinput) #, no-wrap msgid "/usr/bin/livecd-iso-to-disk /path/to/live.iso /dev/sdb1" msgstr "/usr/bin/livecd-iso-to-disk /ścieżka/do/pliku/live.iso /dev/sdb1"
-#: en_US/Fedora_Live_images.xml:64(para) en_US/Fedora_Live_images.xml:85(para) -#: en_US/Fedora_Live_images.xml:110(para) -#: en_US/Fedora_Live_images.xml:130(para) +#: en_US/Fedora_Live_images.xml:62(para) en_US/Fedora_Live_images.xml:81(para) +#: en_US/Fedora_Live_images.xml:106(para) +#: en_US/Fedora_Live_images.xml:126(para) msgid "" "Replace <filename>/dev/sdb1</filename> with the partition where you want to " "put the image." @@ -5728,7 +5725,7 @@ msgstr "" "Zastąp <filename>/dev/sdb1</filename> partycją, na której chcesz umieścić " "obraz."
-#: en_US/Fedora_Live_images.xml:66(para) +#: en_US/Fedora_Live_images.xml:64(para) msgid "" "This is <emphasis>not</emphasis> a destructive process; any data you " "currently have on your USB stick <emphasis>is preserved</emphasis>." @@ -5736,7 +5733,7 @@ msgstr "" "Ten proces <emphasis>nie</emphasis> usunie danych; wszelkie dane znajdujące " "się na dysku USB <emphasis>zostaną zachowane</emphasis>."
-#: en_US/Fedora_Live_images.xml:69(para) +#: en_US/Fedora_Live_images.xml:67(para) msgid "" "A Windows version of this tools is also available that allows users to try " "out or migrate to Fedora." @@ -5744,11 +5741,11 @@ msgstr "" "Wersja tego narzędzia jest dostępna także dla systemu Windows, co umożliwia " "użytkownikom wypróbowanie lub migrowanie do Fedory."
-#: en_US/Fedora_Live_images.xml:75(title) +#: en_US/Fedora_Live_images.xml:73(title) msgid "Persistent Home Directory" msgstr "Trwałość folderu domowego"
-#: en_US/Fedora_Live_images.xml:76(para) +#: en_US/Fedora_Live_images.xml:74(para) msgid "" "Support for keeping a persistent <filename>/home</filename> with the rest of " "the system stateless has been added for Fedora 10. This includes support for " @@ -5762,12 +5759,12 @@ msgstr "" "dysku USB. Aby użyć tej funkcji, pobierz obraz Live i wykonaj następując " "polecenie:"
-#: en_US/Fedora_Live_images.xml:83(userinput) +#: en_US/Fedora_Live_images.xml:80(userinput) #, no-wrap msgid "livecd-iso-to-disk --home-size-mb 512 /path/to/live.iso /dev/sdb1" msgstr "livecd-iso-to-disk --home-size-mb 512 /ścieżka/do/pliku/live.iso /dev/sdb1"
-#: en_US/Fedora_Live_images.xml:87(para) +#: en_US/Fedora_Live_images.xml:83(para) msgid "" "Replace <computeroutput>512</computeroutput> with the desired size in " "megabytes of the persistent <filename>/home</filename>. The <command>livecd-" @@ -5788,7 +5785,7 @@ msgstr "" "długiego hasła. Jeśli nie chcesz szyfrować folderu <filename>/home</" "filename>, możesz podać opcję <option>--unencrypted-home</option>."
-#: en_US/Fedora_Live_images.xml:97(para) +#: en_US/Fedora_Live_images.xml:93(para) msgid "" "Note that later runs of <command>livecd-iso-to-disk</command> preserve the " "<filename>/home</filename> that is created on the USB stick, continuing to " @@ -5798,11 +5795,11 @@ msgstr "" "zachowują folder <filename>/home</filename> utworzony na dysku USB. Można " "więc dalej go używać, nawet po zmianie obrazu Live."
-#: en_US/Fedora_Live_images.xml:103(title) +#: en_US/Fedora_Live_images.xml:99(title) msgid "Live USB Persistence" msgstr "Trwałość Live USB"
-#: en_US/Fedora_Live_images.xml:104(para) +#: en_US/Fedora_Live_images.xml:100(para) msgid "" "Support for persistent changes with a Fedora Live image exists for Fedora 9 " "and later. The primary use case is booting from a Fedora Live image on a USB " @@ -5814,12 +5811,12 @@ msgstr "" "dysku USB i przechowywania zmian na tym samym urządzeniu. Aby to zrobić, " "pobierz obraz Live Fedory i wykonaj następujące polecenie:"
-#: en_US/Fedora_Live_images.xml:109(userinput) +#: en_US/Fedora_Live_images.xml:105(userinput) #, no-wrap msgid "livecd-iso-to-disk --overlay-size-mb 512 /path/to/live.iso /dev/sdb1" msgstr "livecd-iso-to-disk --overlay-size-mb 512 /ścieżka/do/pliku/live.iso /dev/sdb1"
-#: en_US/Fedora_Live_images.xml:112(para) +#: en_US/Fedora_Live_images.xml:108(para) msgid "" "Replace <computeroutput>512</computeroutput> with the desired size in " "megabytes of the persistent data, or <firstterm>overlay</firstterm>. The " @@ -5834,12 +5831,12 @@ msgstr "" "Nośnik USB musi posiadać wystarczającą ilość wolnego miejsca dla obrazu Live " "Fedory i na wszelkie dane przechowywane na nośniku."
-#: en_US/Fedora_Live_images.xml:122(title) +#: en_US/Fedora_Live_images.xml:118(title) msgid "Booting a Fedora Live Image from USB on Intel-based Apple Hardware" msgstr "" "Uruchamianie obrazu Live Fedory z USB na sprzęcie Apple'a opartym na Intelu"
-#: en_US/Fedora_Live_images.xml:124(para) +#: en_US/Fedora_Live_images.xml:120(para) msgid "" "Fedora 10 includes support for putting the Live image onto a USB image and " "then booting it on Intel processor-based Apple hardware. Unlike most x86 " @@ -5851,12 +5848,12 @@ msgstr "" "większości komputerów x86, te niestety wymagają ponownego sformatowania " "używanego dysku USB. Aby ustawić dysk USB, wykonaj te polecenie:"
-#: en_US/Fedora_Live_images.xml:129(userinput) +#: en_US/Fedora_Live_images.xml:125(userinput) #, no-wrap msgid "/usr/bin/livecd-iso-to-disk --mactel /path/to/live.iso /dev/sdb1" msgstr "/usr/bin/livecd-iso-to-disk --mactel /ścieżka/do/pliku/live.iso /dev/sdb1"
-#: en_US/Fedora_Live_images.xml:132(para) +#: en_US/Fedora_Live_images.xml:128(para) msgid "" "Note that all of the other arguments for the <command>livecd-iso-to-disk</" "command> tool as described above can be used here as well." @@ -5864,11 +5861,11 @@ msgstr "" "Zauważ, że wszystkie pozostałe parametry narzędzia <command>livecd-iso-to-" "disk</command> opisane powyżej mogą być używane także tutaj."
-#: en_US/Fedora_Live_images.xml:137(title) +#: en_US/Fedora_Live_images.xml:133(title) msgid "Differences from a Regular Fedora Installation" msgstr "Różnice między zwykłą instalacją Fedory"
-#: en_US/Fedora_Live_images.xml:138(para) +#: en_US/Fedora_Live_images.xml:134(para) msgid "" "The Fedora Live image is different from a normal Fedora installation as " "shown below." @@ -5876,7 +5873,7 @@ msgstr "" "Obrazy Live Fedory różnią się od normalnej instalacji Fedory, tak jak " "pokazano poniżej."
-#: en_US/Fedora_Live_images.xml:142(para) +#: en_US/Fedora_Live_images.xml:138(para) msgid "" "Fedora Live images provide a subset of packages available in the regular DVD " "image. Both connect to the same repository that has all the packages." @@ -5885,7 +5882,7 @@ msgstr "" "obrazie DVD. Oba łączą się z tym samym repozytorium, które posiada wszystkie " "pakiety."
-#: en_US/Fedora_Live_images.xml:146(para) +#: en_US/Fedora_Live_images.xml:142(para) msgid "" "The SSH daemon <systemitem class="daemon">sshd</systemitem> is disabled by " "default. The daemon is disabled because the default username in the Fedora " @@ -5897,7 +5894,7 @@ msgstr "" "żadnego hasła. Mimo to instalacja na twardy dysk poprosi o utworzenie nowego " "użytkownika i hasła."
-#: en_US/Fedora_Live_images.xml:153(para) +#: en_US/Fedora_Live_images.xml:149(para) msgid "" "Fedora Live image installations do not allow any package selection or " "upgrade capability since they copy the entire file system from the Live " @@ -5913,7 +5910,7 @@ msgstr "" "pomocą narzędzia <guimenuitem>Dodaj/usuń oprogramowanie</guimenuitem>, " "<command>yuma</command> lub innego narzędzia do zarządzania oprogramowaniem."
-#: en_US/Fedora_Live_images.xml:162(para) +#: en_US/Fedora_Live_images.xml:158(para) msgid "Fedora Live images do not work on i586 architecture." msgstr "Obrazy Live Fedory nie działają na architekturze i586."
@@ -6498,100 +6495,30 @@ msgstr "Przeglądarki WWW" msgid "Enabling Flash plugin" msgstr "Włączanie wtyczki Flash"
-#: en_US/Fedora_desktop.xml:339(para) +#: en_US/Fedora_desktop.xml:340(para) msgid "" "Fedora includes <command>swfdec</command> and <command>gnash</command>, " "which are free and open source implementations of Flash. We encourage you to " "try either of them before seeking out Adobe's proprietary Flash Player " -"plugin software. The Adobe Flash Player plugin uses a legacy sound framework " -"that does not work correctly without additional support. Run the following " -"command to enable this support:" +"plugin software." msgstr "" "Fedora zawiera wolne implementacje open source Flasha o nazwie " "<command>swfdec</command> i <command>gnash</command>. Polecamy zaznajomienie " -"się z nimi, zanim zainstalujesz własnościową wtyczkę Flasha Player Adobe'a. " -"Ta wtyczka używa przestarzałej struktury dźwięku, która nie działa poprawnie " -"bez dodatkowej obsługi. Wykonaj następujące polecenie, aby włączyć tę " -"obsługę:" +"się z nimi, zanim zainstalujesz własnościową wtyczkę Flasha Player Adobe'a."
-#: en_US/Fedora_desktop.xml:348(userinput) -#: en_US/Fedora_desktop.xml:368(userinput) -#, no-wrap -msgid "su -c 'yum install libflashsupport'" -msgstr "su -c 'yum install libflashsupport'" - -#: en_US/Fedora_desktop.xml:350(para) +#: en_US/Fedora_desktop.xml:346(para) msgid "" -"If you are using Flash 10, you do not need <package>libflashsupport</" -"package> anymore as the usage of ALSA has been fixed in this version." +"For instructions on installing the Flash Player under Fedora 10, refer to " +"<ulink url="http://fedoraproject.org/wiki/Flash%5C%22/%3E" msgstr "" -"Jeśli używasz Flasha 10, nie potrzebujesz już biblioteki " -"<package>libflashsupport</package>, ponieważ użycie bibliotek ALSA zostało " -"naprawione w tej wersji." +"Aby uzyskać instrukcje instalowania Flash Playera w Fedorze 10, przejdź do " +"<ulink url="http://fedoraproject.org/wiki/Flash%5C%22/%3E"
-#: en_US/Fedora_desktop.xml:354(para) -msgid "" -"Users of Fedora x86_64 must install the <package>nspluginwrapper.i386</" -"package> package to enable the 32-bit Adobe Flash Player plug-in in " -"<application>Firefox</application>, and the <package>libflashsupport.i386</" -"package> package to enable sound from the plugin." -msgstr "" -"Użytkownicy x86_64 Fedory muszą zainstalować pakiet <package>nspluginwrapper." -"i386</package>, aby włączyć 32 bitową wtyczkę Flash Player Adobe'a w " -"<application>Firefoksie</application> i pakiet <package>libflashsupport." -"i386</package>, aby włączyć dźwięk we wtyczce." - -#: en_US/Fedora_desktop.xml:360(para) -msgid "" -"Install the <package>nspluginwrapper.i386</package>, " -"<package>nspluginwrapper.x86_64</package>, and <package>libflashsupport." -"i386</package> packages:" -msgstr "" -"Zainstaluj pakiety <package>nspluginwrapper.i386</package>, " -"<package>nspluginwrapper.x86_64</package> i <package>libflashsupport.i386</" -"package>:" - -#: en_US/Fedora_desktop.xml:363(userinput) -#, no-wrap -msgid "su -c 'yum install nspluginwrapper.{i386,x86_64} libflashsupport.i386'" -msgstr "su -c 'yum install nspluginwrapper.{i386,x86_64} libflashsupport.i386'" - -#: en_US/Fedora_desktop.xml:365(para) -msgid "" -"Install <package>flash-plugin</package> after <package>nspluginwrapper.i386</" -"package> is installed:" -msgstr "" -"Zainstaluj pakiet <package>flash-plugin</package> po zainstalowaniu pakietu " -"<package>nspluginwrapper.i386</package>:" - -#: en_US/Fedora_desktop.xml:370(para) -msgid "" -"Run <userinput>mozilla-plugin-config</userinput> to register the flash " -"plugin:" -msgstr "" -"Wykonaj polecenie <userinput>mozilla-plugin-config</userinput>, aby " -"zarejestrować wtyczkę Flasha:" - -#: en_US/Fedora_desktop.xml:373(userinput) -#, no-wrap -msgid "su -c 'mozilla-plugin-config -i -g -v'" -msgstr "su -c 'mozilla-plugin-config -i -g -v'" - -#: en_US/Fedora_desktop.xml:375(para) -msgid "" -"Close all <application>Firefox</application> windows, and then relaunch " -"<application>Firefox</application>. Type <userinput>about:plugins</" -"userinput> in the URL bar to ensure the plugin is loaded." -msgstr "" -"Zamknij wszystkie okna <application>Firefoksa</application>, a potem uruchom " -"go ponownie. Podaj <userinput>about:plugins</userinput> w pasku adresu, aby " -"upewnić się, że wtyczka została wczytana." - -#: en_US/Fedora_desktop.xml:381(title) +#: en_US/Fedora_desktop.xml:389(title) msgid "Disabling PC speaker" msgstr "Wyłączanie głośnika PC"
-#: en_US/Fedora_desktop.xml:382(para) +#: en_US/Fedora_desktop.xml:390(para) msgid "" "PC speaker is enabled by default in Fedora. If you do not prefer this, there " "are two ways to circumvent the sounds:" @@ -6599,7 +6526,7 @@ msgstr "" "Głośnik PC jest domyślnie włączony w Fedorze. Jeśli nie chcesz, aby tak " "było, można to zmienić na dwa sposoby:"
-#: en_US/Fedora_desktop.xml:386(para) +#: en_US/Fedora_desktop.xml:394(para) msgid "" "Reduce its volume to a acceptable level or completely mute the PC speaker in " "<command>alsamixer</command> with the setting for " @@ -6609,14 +6536,14 @@ msgstr "" "głośnik PC w <command>alsamixer</command> za pomocą ustawień dla " "<menuchoice><guimenuitem>PC Speak</guimenuitem></menuchoice>."
-#: en_US/Fedora_desktop.xml:394(para) +#: en_US/Fedora_desktop.xml:402(para) msgid "" "Disable the PC speaker system wide by running the following commands in a " "console:" msgstr "" "Wyłącz głośnik PC w całym systemie wykonując następujące polecenia w konsoli:"
-#: en_US/Fedora_desktop.xml:397(userinput) +#: en_US/Fedora_desktop.xml:405(userinput) #, no-wrap msgid "su -c 'modprobe -r pcspkr' su -c 'echo "install pcspkr :" >> /etc/modprobe.conf'" msgstr "su -c 'modprobe -r pcspkr' su -c 'echo "install pcspkr :" >> /etc/modprobe.conf'" @@ -6943,471 +6870,157 @@ msgstr "" "graficzne komunikaty błędów."
#: en_US/Embedded.xml:5(title) -msgid "Embedded" -msgstr "Urządzenia wbudowane" +msgid "Embedded Development" +msgstr "Oprogramowanie wbudowane"
#: en_US/Embedded.xml:6(para) msgid "" -"Fedora 10 includes a number of applications to support embedded development " -"on a variety of targets. Included are assemblers, compilers, debuggers, " -"programmers, IDEs and assorted utilities." -msgstr "" -"Fedora 10 zawiera wiele aplikacji wspierających programowanie urządzeń " -"wbudowanych na wielu platformach. Dołączone są asemblery, kompilatory, " -"debugery, programatory, IDE i zawiązane z nimi narzędzia." - -#: en_US/Embedded.xml:11(title) -msgid "AVR" -msgstr "AVR" - -#: en_US/Embedded.xml:14(term) -msgid "" -"<package>avrdude</package>Software for programming Atmel AVR microcontroller" -msgstr "" -"<package>avrdude</package>Oprogramowanie do programowania mikrokontrolerów " -"AVR Atmela" - -#: en_US/Embedded.xml:18(para) -msgid "" -"AVRDUDE is a program for programming Atmel's AVR CPU's. It can program the " -"Flash and EEPROM, and where supported by the serial programming protocol, it " -"can program fuse and lock bits. AVRDUDE also supplies a direct instruction " -"mode allowing one to issue any programming instruction to the AVR chip " -"regardless of whether AVRDUDE implements that specific feature of a " -"particular chip." -msgstr "" -"AVRDUDE jest programem do programowania procesorów AVR Atmela. Może " -"programować pamięci flash i EEPROM, a kiedy jest to obsługiwane przez " -"protokół programowania szeregowego, może programować bity fuse i lock. " -"AVRDUDE dostarcza także tryb bezpośrednicj instrukcji umożliwiający " -"rozwiązywanie dowolnych instrukcji programowania na układach AVR, " -"niezależnie czy AVRDUDE implementuje specyficzną funkcję określonego układu." - -#: en_US/Embedded.xml:28(term) -msgid "<package>avr-gcc</package>Cross Compiling GNU GCC targeted at avr" -msgstr "<package>avr-gcc</package> GNU GCC do kompilacji skrośnej dla AVR" - -#: en_US/Embedded.xml:32(para) -msgid "" -"This is a Cross Compiling version of GNU GCC, which can be used to compile " -"for the AVR platform, instead of for the native i386 platform." -msgstr "" -"Jest to wersja GNU GCC do kompilacji skrośnej, która może być używana do " -"kompilowania dla platformy AVR, zamiast dla natywnej platformy i386." - -#: en_US/Embedded.xml:38(term) -msgid "<package>avr-gcc-c++</package>Cross Compiling GNU GCC targeted at avr" -msgstr "<package>avr-gcc-c++</package> GNU GCC do kompilacji skrośnej dla AVR" - -#: en_US/Embedded.xml:42(para) -msgid "" -"This package contains the Cross Compiling version of g++, which can be used " -"to compile c++ code for the AVR platform, instead of for the native i386 " -"platform." -msgstr "" -"Ten pakiet zawiera wersję g++ do kompilacji skrośnej, która może być używana " -"do kompilowania kodu C++ dla platformy AVR, zamiast dla natywnej platformy " -"i386." - -#: en_US/Embedded.xml:48(term) -msgid "" -"<package>avr-libc</package>C library for use with GCC on Atmel AVR " -"microcontrollers" -msgstr "" -"<package>avr-libc</package> Biblioteka C do używania z GCC na " -"mikrokontrolerach AVR Atmela" - -#: en_US/Embedded.xml:52(para) -msgid "" -"AVR Libc is a free software project with the goal to provide a high quality " -"C library for use with GCC on Atmel AVR microcontrollers." -msgstr "" -"AVR Libc jest projektem wolnego oprogramowania, którego celem jest " -"dostarczenie wysokiej jakości biblioteki C do używania z GCC na " -"mikrokontrolerach AVR Atmela." - -#: en_US/Embedded.xml:55(para) -msgid "" -"AVR Libc is licensed under a single unified license. This so-called modified " -"Berkeley license is intended to be compatible with most free software " -"licenses such as the GPL, yet impose as little restrictions as possible for " -"the use of the library in closed-source commercial applications." -msgstr "" -"AVR Libc jest rozprowadzane na jednej, ujednoliconej licencji. Jest to tak " -"zwana zmodyfikowana licencja Berkeley, aby była zgodna z większością " -"licencji wolnego oprogramowania, takich jak GPL, jednocześnie posiadając jak " -"najmniej ograniczeń, jak to możliwe, aby można było używać biblioteki z " -"zamkniętych, komercyjnych aplikacjach." - -#: en_US/Embedded.xml:63(term) -msgid "" -"<package>avr-binutils</package>Cross Compiling GNU binutils targeted at avr" -msgstr "" -"<package>avr-binutils</package> GNU binutils do kompilacji skrośnej dla AVR" - -#: en_US/Embedded.xml:67(para) -msgid "" -"This is a Cross Compiling version of GNU binutils, which can be used to " -"assemble and link binaries for the AVR platform, instead of for the native " -"i386 platform." -msgstr "" -"Jest to wersja GNU binutils do kompilacji skrośnej, która może być używana " -"do asemblowania i konsolidowania plików binarnych dla platformy AVR, zamiast " -"dla natywnej platformy i386." - -#: en_US/Embedded.xml:73(term) -msgid "<package>avr-gdb</package>GDB for (remote) debugging avr binaries" -msgstr "" -"<package>avr-gdb</package> GDB do (zdalnego) debugowania plików binarnych AVR" - -#: en_US/Embedded.xml:77(para) -msgid "" -"This is a special version of GDB, the GNU Project debugger, for (remote) " -"debugging AVR binaries. GDB allows you to see what is going on inside " -"another program while it executes or what another program was doing at the " -"moment it crashed." -msgstr "" -"Jest to specjalna wersja GDB, debugera Projektu GNU, do (zdalnego) " -"debugowania plików binarnych AVR. GDB umożliwia zobaczenie działania " -"wewnątrz innego programu podczas jego wykonywania lub co robił inny program " -"w momencie zawieszenia się." - -#: en_US/Embedded.xml:85(term) -msgid "" -"<package>avarice</package>Program for interfacing the Atmel JTAG ICE to GDB" -msgstr "" -"<package>avarice</package> Program do współdziałania ICE JTAG Atmela z GDB" - -#: en_US/Embedded.xml:89(para) -msgid "" -"Program for interfacing the Atmel JTAG ICE to GDB to allow users to debug " -"their embedded AVR target" -msgstr "" -"Program do współdziałania ICE JTAG Atmela z GDB, umożliwiający użytkownikom " -"debugowanie platform urządzeń wbudowanych AVR" - -#: en_US/Embedded.xml:96(title) -msgid "Microchip PIC" -msgstr "Mikroukłady PIC" - -#: en_US/Embedded.xml:99(term) -msgid "" -"<package>gputils</package>Development utilities for Microchip (TM) PIC (TM) " -"microcontrollers" -msgstr "" -"<package>gputils</package> Narzędzia programistyczne dla mikrokontrolerów " -"Microchip (TM) PIC (TM)" - -#: en_US/Embedded.xml:103(para) -msgid "" -"This is a collection of development tools for Microchip (TM) PIC (TM) " -"microcontrollers. This is ALPHA software: there may be serious bugs in it, " -"and it's nowhere near complete. The <package>gputils</package> package " -"currently only implements a subset of the features available with " -"Microchip's tools. Refer to the documentation for an up-to-date list of what " -"<package>gputils</package> can do." -msgstr "" -"Jest to zestaw narzędzi programistycznych dla mikrokontrolerów Microchip " -"(TM) PIC (TM). Jest to oprogramowanie w fazie Alpha: może zawierać poważne " -"błędy, i nie jest bliskie ukończenia. Pakiet <package>gputils</package> " -"obecnie implementuje tylko podzestaw funkcji dostępnych w narzędziach " -"Microchip. Zobacz dokumentację, aby dowiedzieć się co aktualnie " -"<package>gputils</package> może robić." - -#: en_US/Embedded.xml:114(term) -msgid "" -"<package>gpsim</package> A simulator for Microchip (TM) PIC (TM) " -"microcontrollers" -msgstr "" -"<package>gpsim</package> Symulator dla mikrokontrolerów Microchip (TM) PIC " -"(TM)" - -#: en_US/Embedded.xml:117(para) -msgid "" -"The <package>gpsim</package> software is a simulator for Microchip (TM) PIC " -"(TM) microcontrollers. It supports most devices in Microchip's 12-bit, " -"14bit, and 16-bit core families. In addition, gpsim supports dynamically " -"loadable modules such as LED's, LCD's, resistors, and so forth, to extend " -"the simulation environment beyond the PIC." -msgstr "" -"Oprogramowanie <package>gpsim</package> jest symulatorem dla " -"mikrokontrolerów Microchip (TM) PIC (TM). Obsługuje większość urządzeń w " -"rodzinach rdzeni Microchip 12, 14 i 16 bitowych. Dodatkowo gpsim obsługuje " -"dynamicznie wczytywane moduły, takie jak LED, LCD, rezystory i tak dalej, " -"aby rozszerzyć środowisko symulacyjne poza PIC." - -#: en_US/Embedded.xml:126(term) -msgid "" -"<package>ktechlab</package> Development and simulation of microcontrollers " -"and electronic circuits" -msgstr "" -"<package>ktechlab</package> Rozwijanie i symulowanie mikrokontrolerów i " -"obwodów elektronicznych" - -#: en_US/Embedded.xml:129(para) -msgid "" -"<application>KTechlab</application> is a development and simulation " -"environment for microcontrollers and electronic circuits, distributed under " -"the GNU General Public License. <application>KTechlab</application> consists " -"of several well-integrated components:" -msgstr "" -"<application>KTechlab</application> jest środowiskiem rozwijania i " -"symulowania mikrokontrolerów i obwodów elektronicznych, rozprowadzana na " -"Powszechnej Licencji Publicznej GNU. <application>KTechlab</application> " -"składa się z kilku dobrze zintegrowanych składników:" - -#: en_US/Embedded.xml:136(para) -msgid "" -"A circuit simulator, capable of simulating logic, linear devices and some " -"nonlinear devices." -msgstr "" -"Symulator obwodów, zdolny do symulowania logiki, urządzeń liniowych i " -"niektórych urządzeń nieliniowych." - -#: en_US/Embedded.xml:139(para) -msgid "" -"Integration with <command>gpsim</command>, allowing PICs to be simulated in " -"circuit." -msgstr "" -"Integracja z <command>gpsim</command>, umożliwiająca PIC na symulowanie w " -"obwodzie." - -#: en_US/Embedded.xml:142(para) -msgid "" -"A schematic editor, which provides a rich real-time feedback of the " -"simulation." -msgstr "" -"Edytor schematów, dostarczający bogaty wgląd w symulację w czasie " -"rzeczywistym." - -#: en_US/Embedded.xml:145(para) -msgid "A flowchart editor, allowing PIC programs to be constructed visually." -msgstr "" -"Edytor diagramów przepływu, umożliwiający wizualne konstruowanie programów " -"PIC." - -#: en_US/Embedded.xml:148(para) -msgid "" -"MicroBASIC; a BASIC-like compiler for PICs, written as a companion program " -"to <application>KTechlab</application>." -msgstr "" -"MicroBASIC, kompilator dla PIC podobny do BASIC-a, napisany jako program " -"wspierający <application>KTechlab</application>." - -#: en_US/Embedded.xml:152(para) -msgid "" -"An embedded <application>Kate</application> part, which provides a powerful " -"editor for PIC programs." -msgstr "" -"Wbudowana część <application>Kate</application>, dostarczająca edytor " -"programów PIC o dużych możliwościach." - -#: en_US/Embedded.xml:156(para) -msgid "" -"Integrated assembler and disassembler via <command>gpasm</command> and " -"<command>gpdasm</command>." -msgstr "" -"Zintegrowany asembler i deasembler przez <command>gpasm</command> i " -"<command>gpdasm</command>." - -#: en_US/Embedded.xml:164(term) -msgid "" -"<package>pikdev</package> IDE for development of PICmicro based application " -"(under Linux/KDE)" -msgstr "" -"IDE <package>pikdev</package> do rozwijania aplikacji opartych na PICmicro " -"(w Linuksie/KDE)" - -#: en_US/Embedded.xml:167(para) -msgid "" -"<application>PiKdev</application> is a simple IDE dedicated to the " -"development of PIC based applications under KDE. Features:" -msgstr "" -"<application>PiKdev</application> jest prostym IDE przeznaczonym do " -"rozwijania aplikacji opartych na PIC w KDE. Funkcje:" - -#: en_US/Embedded.xml:173(para) -msgid "Integrated editor" -msgstr "Zintegrowany edytor" - -#: en_US/Embedded.xml:175(para) -msgid "Project management" -msgstr "Zarządzanie projektem" - -#: en_US/Embedded.xml:177(para) -msgid "" -"Integrated programming engine for 12, 14 and 16 bits PIC (flash or EPROM " -"technology)" -msgstr "" -"Zintegrowany silnik programowania dla PIC 12, 14 i 16 bitowych (technologia " -"flash lub EPROM)" - -#: en_US/Embedded.xml:180(para) -msgid "Support for parallel and serial port programmers" -msgstr "Obsługa programatorów portów równoległych i szeregowych" - -#: en_US/Embedded.xml:183(para) -msgid "KDE compliant look-and-feel" -msgstr "Wygląd zgodny z KDE" - -#: en_US/Embedded.xml:186(para) -msgid "" -"The system administrator must read <filename>README.Fedora</filename> file " -"located in the <filename>/usr/share/doc/pikdev-0.9.2</filename> directory to " -"complete the full feature installation." -msgstr "" -"Administrator systemu musi przeczytać plik <filename>README.Fedora</" -"filename> znajdujący się w folderze <filename>/usr/share/doc/pikdev-0.9.2</" -"filename>, aby dokończyć instalację wszystkich funkcji." - -#: en_US/Embedded.xml:193(term) -msgid "" -"<package>piklab</package> Development environment for applications based on " -"PIC & dsPIC" -msgstr "" -"<package>piklab</package> Środowisko programistyczne dla aplikacji opartych " -"na PIC i dsPIC" - -#: en_US/Embedded.xml:197(para) -msgid "" -"<application>Piklab</application> is a graphic development environment for " -"PIC and dsPIC microcontrollers. It interfaces with various toochains for " -"compiling and assembling and it supports several Microchip and direct " -"programmers. The system administrator must refer to the <filename>README." -"Fedora</filename> file located in the <filename>/usr/share/doc/piklab-" -"0.15.0</filename> directory to complete full feature installation." -msgstr "" -"<application>Piklab</application> jest graficznym środowiskiem " -"programistycznym dla mikrokontrolerów PIC i dsPIC. Współpracuje z różnymi " -"zestawami narzędzi do kompilowania i asemblemowania oraz obsługuje kilka " -"programatorów Microchip i programatorów bezpośrednich. Administrator systemu " -"musi przeczytać plik <filename>README.Fedora</filename> znajdujący się w " -"folderze <filename>/usr/share/doc/piklab-0.15.0</filename>, aby dokończyć " -"instalację wszystkich funkcji." - -#: en_US/Embedded.xml:208(term) -msgid "<package>pikloops</package> Code generator for PIC delays" -msgstr "<package>pikloops</package> Tworzenie kodów dla opóźnień PIC" - -#: en_US/Embedded.xml:212(para) -msgid "" -"<application>PiKLoop</application> generates code to create delays for " -"Microchip PIC microcontrollers. It is a useful companion for " -"<application>Pikdev</application> or <application>Piklab</application> IDE." -msgstr "" -"<application>PiKLoop</application> generuje kod do tworzenia opóźnień " -"mikrokontrolerów Microchip PIC. Jest przydatnym uzupełnieniem IDE " -"<application>Pikdev</application> lub <application>Piklab</application>." - -#: en_US/Embedded.xml:221(title) -msgid "Others and processor agnostic" -msgstr "Inne i niezależne od procesora" - -#: en_US/Embedded.xml:224(term) -msgid "" -"<package>dfu-programmer</package> A device firmware update based USB " -"programmer for Atmel chips" -msgstr "" -"<package>dfu-programmer</package> Programator USB oparty na aktualizowaniu " -"oprogramowania wbudowanego w urządzenie dla układów Atmela" - -#: en_US/Embedded.xml:228(para) -msgid "" -"A linux based command-line programmer for Atmel chips with a USB bootloader " -"supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant " -"user-space application. Currently supported chips: 8051, AVR, at89c51snd1c, " -"at90usb1287, at89c5130, at90usb1286, at89c5131, at90usb647, at89c5132, " -"at90usb646, at90usb162, and at90usb82." -msgstr "" -"Programator wiersza poleceń oparty na Linuksie dla układów Atmela z ISP " -"obsługującym uruchamianie z USB. W większości są to aplikacje w przestrzeni " -"użytkownika zgodne z Aktualizacją oprogramowania wbudowanego w urządzenia " -"(DFU) 1.0. Obecnie obsługiwane układy: 8051, AVR, at89c51snd1c, at90usb1287, " -"at89c5130, at90usb1286, at89c5131, at90usb647, at89c5132, at90usb646, " -"at90usb162 i at90usb82." - -#: en_US/Embedded.xml:238(term) -msgid "<package>sdcc</package> Small Device C Compiler" -msgstr "<package>sdcc</package> Kompilator C dla małych urządzeń" - -#: en_US/Embedded.xml:241(para) -msgid "" -"The <package>sdcc-2.6.0-12</package> package for SDCC is a C compiler for " -"8051 class and similar microcontrollers. The package includes the compiler, " -"assemblers and linkers, a device simulator, and a core library. The " -"processors supported (to a varying degree) include the 8051, ds390, z80, " -"hc08, and PIC." -msgstr "" -"Pakiet <package>sdcc-2.6.0-12</package> dla SDCC jest kompilatorem C dla " -"mikrokontrolerów klasy 8051 i podobnych. Pakiet zawiera kompilator, " -"asemblery i konsolidatory, symulator urządzeń oraz biblioteka rdzenia. " -"Obsługiwane procesory (w różnym stopniu) to 8051, ds390, z80, hc08 i PIC." - -#: en_US/Embedded.xml:250(term) -msgid "" -"<package>uisp</package> Universal In-System Programmer for Atmel AVR and 8051" -msgstr "" -"<package>uisp</package> Uniwersalny systemowy programator dla AVR i 8051 " -"Atmela" - -#: en_US/Embedded.xml:254(para) -msgid "" -"The <command>uisp</command> utility is for downloading/uploading programs to " -"AVR devices. It can also be used for some Atmel 8051 type devices. In " -"addition, <command>uisp</command> can erase the device, write lock bits, " -"verify and set the active segment. For use with the following hardware to " -"program the devices: pavr, stk500, Atmel STK500, dapa, Direct AVR Parallel " -"Access, stk200, Parallel Starter Kit, STK200, STK300, abb, Altera, " -"ByteBlasterMV Parallel Port Download Cable, avrisp, Atmel AVR, bsd, fbprg " -"(parallel), dt006 (parallel), dasa serial (RESET=RTS SCK=DTR MOSI=TXD " -"MISO=CTS), dasa2 serial (RESET=!TXD SCK=RTS MOSI=DTR MISO=CTS)" -msgstr "" -"Narzędzie <command>uisp</command> służy do pobierania/wysyłania programów do " -"urządzeń AVR. Może być także używany dla niektórych typów urządzeń 8051 " -"Atmela. Dodatkowo <command>uisp</command> może usuwać dane z urządzenia, " -"zapisywać bity lock, sprawdzać i ustawiań aktywny segment. Można używać " -"następującego sprzętu do programowania urządzeń: pavr, stk500, Atmel STK500, " -"dapa, Bezpośredni równoległy dostęp AVR, stk200, Zestaw początkowy " -"równoległy, STK200, STK300, abb, Altera, Kabel pobierania portu równoległego " -"ByteBlasterMV, avrisp, AVR Atmela, bsd, fbprg (równolegle), dt006 " -"(równolegle), szeregowe dasa (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS), " -"szeregowe dasa2 (RESET=!TXD SCK=RTS MOSI=DTR MISO=CTS)" - -#: en_US/Embedded.xml:269(term) -msgid "<package>simcoupe</package> SAM Coupe emulator (spectrum compatible)" -msgstr "<package>simcoupe</package> symulator SAM Coupe (zgodny ze Spectrum)" - -#: en_US/Embedded.xml:273(para) -msgid "" -"<application>SimCoupe</application> emulates an 8bit Z80 based home " -"computer, released in 1989 by Miles Gordon Technology. The SAM Coupe was " -"largely spectrum compatible, with much improved hardware" -msgstr "" -"<application>SimCoupe</application> emuluje komputer domowy oparty na 8 " -"bitowym Z80, wydany w 1989 przez firmę Miles Gordon Technology. SAM Coupe " -"był w większości zgodny ze Spectrum, ale ze znacznie ulepszonym sprzętem" - -#: en_US/Embedded.xml:280(term) -msgid "<package>sjasm</package> A z80 cross assembler" -msgstr "<package>sjasm</package> Asembler skrośny Z80" - -#: en_US/Embedded.xml:283(para) -msgid "SjASM is a two pass macro Z80 cross assembler" -msgstr "SjASM jest dwuprzejściowym asemblerem skrośnym Z80" - -#: en_US/Embedded.xml:287(term) -msgid "<package>z88dk</package> A Z80 cross compiler" -msgstr "<package>z88dk</package> Kompilator skrośny Z80" +"Fedora 10 includes a range of packages to support development of embedded " +"applications on various targets. There is broad support for the AVR and " +"related parts as well as for the Microchip PIC. In addition, there are " +"packages to support development on older, less popular parts such as the " +"Z80, 8051, and others. For a more complete description see <ulink url=" +""http://fedoraproject.org/wiki/Packages_For_Embedded_Development%5C%22/%3E." +msgstr "" +"Fedora 10 zawiera wiele pakietów wspierających programowanie aplikacji " +"wbudowanych na wielu platformach docelowych. Zapewniają szerokie wsparcie " +"AVR i związanych z nią części, a także mikroukładów PIC. Dodatkowo są " +"pakiety wspierające programowanie na starszych, mniej popularnych częściach, " +"jakich jak Z80, 8051 i innych. Aby uzyskać bardziej kompletny opis zobacz " +"<ulink url="http://fedoraproject.org/wiki/Packages_For_Embedded_Development" +""/>."
-#: en_US/Embedded.xml:290(para) -msgid "" -"The <command>z88dk</command> program is a Z80 cross compiler capable of " -"generating binary files for a variety of Z80 based machines (such as the " -"ZX81, Spectrum, Jupiter Ace, and some TI calculators)." -msgstr "" -"Program <command>z88dk</command> jest kompilatorem skrośnym Z80, " -"umożliwiającym tworzenie plików binarnych dla różnych komputerach opartych " -"na Z80 (takich jak ZX81, Spectrum, Jupiter Ace i niektóre kalkulatory TI)" +#: en_US/Embedded.xml:15(title) +msgid "avr-binutils" +msgstr "avr-binutils" + +#: en_US/Embedded.xml:16(para) +msgid "" +"This release includes version 2.18 of <package>avr-binutils</package>. In " +"addition to a large number of bugfixes, this release includes a new tool, " +"<code>windmc</code>, to provide a Windows-compatible message compiler." +msgstr "" +"To wydanie zawiera wersję 2.18 pakietu <package>avr-binutils</package>. Poza " +"dużą liczbą poprawek błędów to wydanie zawiera nowe narzędzie, <code>windmc</" +"code>, aby dostarczyć kompilator komunikatów zgodny z Windows." + +#: en_US/Embedded.xml:25(title) +msgid "dfu-programmer" +msgstr "dfu-programmer" + +#: en_US/Embedded.xml:26(para) +msgid "" +"Version 0.4.6 of <package>dfu-programmer</package> is included in Fedora 10. " +"4k bootloaders are now supported and eeprom-flash and eeprom-dump are now " +"supported. Release information as well as a forum specific to this version " +"can be found at <ulink url="http://dfu-programmer.sourceforge.net/%5C%22/%3E." +msgstr "" +"W Fedorze 10 dołączona jest wersja 0.4.6 pakietu <package>dfu-programmer</" +"package>. Programy startowe 4k oraz eeprom-flash i eeprom-dump są teraz " +"obsługiwane. Informacje o wydaniu oraz forum tej wersji można znaleźć na " +"<ulink url="http://dfu-programmer.sourceforge.net/%5C%22/%3E." + +#: en_US/Embedded.xml:35(title) +msgid "gputils" +msgstr "gputils" + +#: en_US/Embedded.xml:36(para) +msgid "" +"<package>gputils</package> has been updated to version 0.13.6 which includes " +"support for many more PIC18 processors as well as support for Microchip's " +"new COFF file format. Find details at <ulink url="http://gputils." +"sourceforge.net/"/>." +msgstr "" +"Pakiet <package>gputils</package> został zaktualizowany do wersji 0.13.6, " +"która zawiera obsługę wielu procesorów PIC18, a także obsługę nowego formatu " +"plików mikroukładów COFF. Szczegóły znajdują się na stronie <ulink url=" +""http://gputils.sourceforge.net/%5C%22/%3E." + +#: en_US/Embedded.xml:44(title) +msgid "piklab" +msgstr "piklab" + +#: en_US/Embedded.xml:45(para) +msgid "" +"Fedora 10 includes version 3.5.10 of the popular IDE <package>piklab</" +"package>. This version now supports the Microchip ICD2 and PICkit in-circuit " +"debuggers, as well as a number of other improvements. <package>piklab</" +"package> now supports the following toolchains; <package>gputils</package>, " +"C30 and C18, PICC, JAL, BoostC, CCS, MPC and CC5X. Many of the toolchains " +"use Windows executables via <package>Wine</package>. See <ulink url="http://" +"piklab.sourceforge.net/"/> for complete details." +msgstr "" +"Fedora 10 zawiera wersję 3.5.10 popularnego IDE <package>piklab</package>. " +"Ta wersja obsługuje debugery wewnątrz obwodów mikroukładów ICD2 i PICkit, a " +"także wiele innych ulepszeń. <package>piklab</package> obsługuje teraz " +"następujące zestawy narzędzi: <package>gputils</package>, C30 i C18, PICC, " +"JAL, BoostC, CCS, MPC i CC5X. Wiele zestawów narzędzi używa plików " +"wykonywalnych Windows przez <package>Wine</package>. Zobacz <ulink url=" +""http://piklab.sourceforge.net/%5C%22/%3E, aby uzyskać szczegóły." + +#: en_US/Embedded.xml:57(para) +msgid "" +"Note that the executable names for <package>sdcc</package> have changed (see " +"below). Since <package>piklab</package> does not provide for configuring " +"executable names, but does provide for configuring paths, the " +"<package>piklab</package>/<package>sdcc</package> user should copy files " +"beginning with <code>sdcc-</code> from <code>/usr/bin</code> to <code>/usr/" +"local/bin</code> and adjust the paths in <package>piklab</package> until " +"this issue is resolved." +msgstr "" +"Zauważ, że nazwy plików wykonywalnych dla <package>sdcc</package> zostały " +"zmienione (zobacz poniżej). Ponieważ <package>piklab</package> nie dostarcza " +"konfigurowania nazw plików wykonywalnych, ale dostarcza konfigurowanie " +"ścieżek, użytkownik <package>piklab</package>/<package>sdcc</package> " +"powinien skopiować pliki zaczynające się od <code>sdcc-</code> z <code>/usr/" +"bin</code> do <code>/usr/local/bin</code> i dostosować ścieżki w " +"<package>piklab</package>, zanim ten problem zostanie rozwiązany." + +#: en_US/Embedded.xml:70(title) +msgid "Windows Directory Names" +msgstr "Nazwy folderów Windows" + +#: en_US/Embedded.xml:71(para) +msgid "" +"Microchip has a tendency to have a lot of spaces in their default " +"installation directories. Getting those paths configured in <package>piklab</" +"package> can be quite confusing, so the dual-boot user may choose to copy " +"files to the <code>/usr/local</code> tree rather than simply mounting the " +"Windows drive and directly referencing the files in the Microchip " +"installation. This affects not only executables, but linker scripts, headers " +"and libraries." +msgstr "" +"Mikroukłady mają tendencję do zajmowania dużej przestrzeni w swoich " +"domyślnych folderach instalacji. Skonfigurowanie tych ścieżek w " +"<package>piklab</package> może być trochę utrudnione, więc użytkownik dwóch " +"systemów może wybrać skopiowanie plików do drzewa <code>/usr/local</code>, " +"zamiast po prostu zamontować dysk Windows i bezpośrednio odnosić pliki w " +"instalacji mikroukładów. To wpływa nie tylko na pliki wykonywalne, ale także " +"na skrypty konsolidatora, nagłówki i biblioteki." + +#: en_US/Embedded.xml:84(title) +msgid "sdcc" +msgstr "sdcc" + +#: en_US/Embedded.xml:85(para) +msgid "" +"Version 2.8.0 of the Small Device C Compiler is included in Fedora 10. This " +"version offers a number of improvements to the version in Fedora 9. Some of " +"these changes will result in changes to source code, so users should review " +"the <package>sdcc</package> manual carefully for their target. In addition, " +"due to some conflicts, all the executable names have been prefixed with " +"<code>sdcc-</code>, which will require changes to makefiles. See the " +"<package>sdcc</package> page at <ulink url="http://sdcc.sourceforge.net/%5C%22/" +"> for complete details." +msgstr "" +"Wersja 2.8.0 Kompilatora C dla małych urządzeń jest dołączona do Fedory 10. " +"Ta wersja oferuje liczne ulepszenia wersji z Fedory 9. Niektóre z tych zmian " +"spowodują zmiany w kodzie źródłowym, więc użytkownicy powinni dokładnie " +"przejrzeć podręcznik <package>sdcc</package> dla ich platformy docelowej. " +"Dodatkowo z powody kilku konfliktów, wszystkie nazwy plików wykonywalnych " +"zostały poprzedzone przedrostkiem <code>sdcc-</code>, co będzie wymagało " +"zmian w plikach make. Zobacz stronę <package>sdcc</package> na <ulink url=" +""http://sdcc.sourceforge.net/%5C%22/%3E, aby uzyskać szczegóły."
#: en_US/Database_servers.xml:5(title) msgid "Database servers" @@ -8518,6 +8131,141 @@ msgstr "" "przechowywania dzienników radia amatorskiego oraz inne aplikacje " "interesujące entuzjastów amatorskiego radia i elektroniki."
+#: en_US/Amateur_radio.xml:57(para) +msgid "" +"For a complete list of all the amateur radio and electronics related " +"packages see Applications for Amateur Radio on the wiki (<ulink url="http://" +"fedoraproject.org/wiki/Applications_for_Amateur_Radio"/>)." +msgstr "" +"Aby uzyskać kompletną listę wszystkich pakietów związanych z " +"radioamatorstwem i elektroniką, zobacz aplikacje dla radioamatorów na wiki " +"(<ulink url="http://fedoraproject.org/wiki/Applications_for_Amateur_Radio%5C%22/" +">)." + +#: en_US/Amateur_radio.xml:63(para) +msgid "In this release, there are a number of changes." +msgstr "To wydanie zawiera liczne zmiany." + +#: en_US/Amateur_radio.xml:66(para) +msgid "" +"The <package>geda</package> (gnu Electronic Design Assistant) suite of tools " +"has been updated to version 20080929. This is a bugfix release and there are " +"no major changes visible to the user. <package>pcb</package> has been " +"updated to 0.20081128. <package>gtkwave</package> which is used by the gEDA " +"suite has also been updated to 3.1.13. These are also bugfix releases." +msgstr "" +"Zestaw narzędzi <package>geda</package> (Asystent projektowania elektroniki " +"GNU) został zaktualizowany do wersji 20080929. Jest to wydanie naprawiające " +"błędy i nie zawierające żadnych większych zmian widocznych dla użytkownika. " +"Pakiet <package>pcb</package> został zaktualizowany do wersji 0.20081128. " +"Program <package>gtkwave</package> używany przez zestaw gEDA został także " +"zaktualizowany do wersji 3.1.13. To także są wydania naprawiające błędy." + +#: en_US/Amateur_radio.xml:74(para) +msgid "" +"<package>gerbv</package> 2.1.0 is also used as part of the gEDA suite. It " +"includes a number of new features:" +msgstr "" +"<package>gerbv</package> 2.1.0 jest także używane jako część zestawu gEDA. " +"Zawiera liczne nowe funkcje:" + +#: en_US/Amateur_radio.xml:80(para) +msgid "" +"Added ability to select objects, with the option of deleting or viewing " +"basic properties of the objects" +msgstr "" +"Dodano możliwość wybierania obiektów, razem z opcją usuwania lub " +"przeglądania podstawowych właściwości obiektów" + +#: en_US/Amateur_radio.xml:86(para) +msgid "" +"Split off the core functionality of gerbv into a library (libgerbv) to allow " +"developers to quickly write software using Gerber parsing/editing/exporting/" +"rendering functionality. Full Doxygen documentation has also been created to " +"facilitate developers wishing to use libgerbv." +msgstr "" +"Wydzielono podstawową funkcjonalność gerbv do biblioteki (libgerbv), aby " +"umożliwić programistom szybkie pisanie oprogramowania, używając funkcji " +"parsowania/modyfikowania/eksportowania/renderowania Gerbera. Pełna " +"dokumentacją Doxygen została także utworzona, aby ułatwić programowanie " +"używając libgerbv." + +#: en_US/Amateur_radio.xml:95(para) +msgid "" +"Added export to RS274X and Excellon functionality, allowing gerbv to " +"translate files between formats. The RS274X export function can also be used " +"to "clean" troublesome files to a more compatible format." +msgstr "" +"Dodano eksportowanie do funkcjonalności RS274X i Excellon, umożliwiając " +"gerbv tłumaczenie plików między formatami. Funkcja eksportu RS274X może być " +"także używana, aby "czyścić" problematyczne pliki na bardziej zgodny " +"format." + +#: en_US/Amateur_radio.xml:103(para) +msgid "" +"Added the ability to override the Excellon format "guessing", allowing non-" +"standard drill files to be correctly rendered" +msgstr "" +"Dodano możliwość zastąpienia "zgadywania" formatu Excellon, umożliwiając " +"poprawne renderowanie niestandardowych plików drill" + +#: en_US/Amateur_radio.xml:109(para) +msgid "" +"Greatly expanded the command line functionality, including the ability to " +"panelize boards into a single one through the command line" +msgstr "" +"Znacznie rozszerzono funkcjonalność wiersza poleceń, w tym możliwość " +"tworzenia z płyt jednego panelu przez wiersz poleceń" + +#: en_US/Amateur_radio.xml:116(para) +msgid "" +"Added "Aperture usage" tab to Gerber reports. This allows the user to see " +"how often each aperture is used in all visible layers of his project." +msgstr "" +"Dodano kartę "Użycie szczelin" do raportów Gerbera. Umożliwia to " +"użytkownikom zobaczenie, jak często każda szczelina jest używana we " +"wszystkich widocznych warstwach projektu." + +#: en_US/Amateur_radio.xml:123(para) +msgid "" +"<package>gnuradio</package> has been update to version 3.1.2. There are a " +"large number of bugfixes as well as many "fine tuning" changes to the gui. " +"See the gnuradio release log at http://gnuradio.org/trac/wiki/" +"Release3.1Branch for complete details." +msgstr "" +"Pakiet <package>gnuradio</package> został zaktualizowany do wersji 3.1.2. " +"Zawiera liczne poprawki błędów, a także wiele ulepszających zmian w GUI. " +"Zobacz dziennik wydania gnuradio na http://gnuradio.org/trac/wiki/" +"Release3.1Branch, aby uzyskać szczegóły." + +#: en_US/Amateur_radio.xml:130(para) +msgid "" +"<package>iverilog</package> is used for circuit simulation and Fedora 10 " +"includes version 0.9.20080905. This is primarily a bugfix release." +msgstr "" +"Pakiet <package>iverilog</package> jest używany do symulacji obwodów, a " +"Fedora 10 zawiera wersję 0.9.20080905. Jest to przede wszystkim wydanie " +"naprawiające błędy." + +#: en_US/Amateur_radio.xml:135(para) +msgid "" +"Fedora 10 includes version 3.4.30 of <package>xcircuit</package>, a " +"schematic capture and netlist generation tool. This is a minor upgrade from " +"Fedora 9 and upgrading should pose no problems for users." +msgstr "" +"Fedora 10 zawiera wersję 3.4.30 pakietu <package>xcircuit</package>, " +"narzędzia do przechwytywania schematów i tworzenia list sieciowych. Jest to " +"mała aktualizacja z Fedory 9, która nie powinna sprawiać użytkownikom " +"żadnych problemów." + +#: en_US/Amateur_radio.xml:140(para) +msgid "" +"<package>soundmodem</package> has been temporarily removed from the " +"distribution. It is expected to be back before the release of Fedora 11." +msgstr "" +"Pakiet <package>soundmodem</package> został tymczasowo usunięty z " +"dystrybucji. Oczekiwany jest jego powrót przed wydaniem Fedory 11." + #. Put one translator per line, in the form of NAME <EMAIL>, YEAR1, YEAR2. #: en_US/Amateur_radio.xml:0(None) msgid "translator-credits"
docs-commits@lists.fedoraproject.org