commit 168fe01c7ec63b861a8e2f4fce7f7332c25c61b2
Author: Petr Bokoc <pbokoc(a)redhat.com>
Date: Sun Nov 16 19:48:18 2014 +0100
Adding the Add FCoE SAN section to FilterSpoke
en-US/FilterSpoke_AddFCoE.xml | 43 ++++++++++++++++++++++++++++++++++++++++-
1 files changed, 42 insertions(+), 1 deletions(-)
---
diff --git a/en-US/FilterSpoke_AddFCoE.xml b/en-US/FilterSpoke_AddFCoE.xml
index 92ad22d..f3c64e2 100644
--- a/en-US/FilterSpoke_AddFCoE.xml
+++ b/en-US/FilterSpoke_AddFCoE.xml
@@ -6,6 +6,47 @@
<section id="sect-installation-gui-installation-destination-add-fcoe">
<title>Add FCoE SAN</title>
<para>
- text
+ The following procedure explains how to add <firstterm>Fibre Channel over
Ethernet</firstterm> (FCoE) storage devices and make them available during the
installation:
</para>
+ <procedure
id="proc-installation-gui-installation-destination-add-fcoe">
+ <title>Add FCoE Target</title>
+ <step>
+ <para>
+ Click the <guilabel>Add FCoE SAN</guilabel> button in the
bottom right corner of <xref
linkend="sect-installation-gui-installation-destination" />. A new dialog
window will open.
+ </para>
+ </step>
+ <step>
+ <para>
+ Select the network interface (<guilabel>NIC</guilabel>) which
is connected to your FCoE switch from the drop-down menu. Note that this network interface
must be configured and connected - see <xref
linkend="sect-installation-gui-network-configuration" />.
+ </para>
+ </step>
+ <step>
+ <para>
+ Below the <guilabel>NIC</guilabel> drop-down menu are two
choices:
+ </para>
+ <variablelist>
+ <varlistentry>
+ <term>Use DCB</term>
+ <listitem>
+ <para>
+ <firstterm>Data Center Bridging</firstterm> (DCB)
is a set of enhancements to the Ethernet protocols designed to increase the efficiency of
Ethernet connections in storage networks and clusters. This option should only be enabled
for network interfaces that require a host-based DCBX client. Configurations on interfaces
that implement a hardware DCBX client should leave this check box empty.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>Use auto vlan</term>
+ <listitem>
+ <para>
+ This option indicates whether VLAN discovery should be
performed. If this box is checked, then the <firstterm>FCoE Initiation
Protocol</firstterm> (FIP) VLAN discovery protocol will run on the Ethernet
interface once the link configuration has been validated. If they are not already
configured, network interfaces for any discovered FCoE VLANs will be automatically created
and FCoE instances will be created on the VLAN interfaces. This option is enabled by
default.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </step>
+ <step>
+ <para>
+ After you select which interface and options to use, click
<guilabel>Add FCoE Disk(s)</guilabel>. Discovered FCoE storage devices will be
displayed under the <guilabel>Other SAN Devices</guilabel> tab in <xref
linkend="sect-installation-gui-installation-destination" />.
+ </para>
+ </step>
+ </procedure>
</section>
Show replies by date