Author: transif
Date: 2010-08-05 14:08:52 +0000 (Thu, 05 Aug 2010)
New Revision: 277
Modified:
community/f13/es-ES/Squid.po
Log:
l10n: Updates to Spanish (Castilian) (es) translation
Transmitted-via: Transifex (
translate.fedoraproject.org)
Modified: community/f13/es-ES/Squid.po
===================================================================
--- community/f13/es-ES/Squid.po 2010-08-05 14:08:19 UTC (rev 276)
+++ community/f13/es-ES/Squid.po 2010-08-05 14:08:52 UTC (rev 277)
@@ -1,17 +1,20 @@
-#
-# AUTHOR <EMAIL@ADDRESS>, YEAR.
+# Fedora Spanish translation of the managing-confined-services-guide.
+# This file is distributed under the same license as the managing-confined-services-guide
package.
#
+# Héctor Daniel Cabrera <logan(a)fedoraproject.org>, 2010.
+#
msgid ""
msgstr ""
-"Project-Id-Version: 0\n"
+"Project-Id-Version: Managing Confined Services\n"
"POT-Creation-Date: 2010-05-13T23:05:31\n"
-"PO-Revision-Date: 2010-08-02 19:02-0300\n"
-"Last-Translator: Claudio Rodrigo Pereyra Diaz
<claudio(a)pereyradiaz.com.ar>\n"
-"Language-Team: None\n"
+"PO-Revision-Date: 2010-08-05 09:53-0300\n"
+"Last-Translator: Héctor Daniel Cabrera <logan(a)fedoraproject.org>\n"
+"Language-Team: Fedora Spanish <trans-es(a)lists.fedoraproject.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Poedit-Language: Spanish\n"
+"X-Poedit-Country: ARGENTINA\n"
#. Tag: title
#, no-c-format
@@ -132,7 +135,7 @@
#. Tag: para
#, no-c-format
msgid "When <filename>/etc/squid/squid.conf</filename> is configured so
<systemitem class=\"daemon\">squid</systemitem> listens on a port
other than the default TCP ports 3128, 3401 or 4827, the <command>semanage
port</command> command must be used to add the required port number to the SELinux
policy configuration. The following example demonstrates configuring <systemitem
class=\"daemon\">squid</systemitem> to listen on a port that is not
initially defined in SELinux policy configuration for <systemitem
class=\"daemon\">squid</systemitem>, and, as a consequence,
<systemitem class=\"daemon\">squid</systemitem> failing to start.
This example also demonstrates how to then configure the SELinux system to allow
<systemitem class=\"daemon\">squid</systemitem> to successfully
listen on a non-standard port that is not already defined in the policy. This example
assumes the <package>squid</package> package is installed. Run each command in
the example as the root user:"
-msgstr ""
+msgstr "Cuando <filename>/etc/squid/squid.conf</filename> ha sido
configurado de modo que <systemitem
class=\"daemon\">squid</systemitem> escuche sobre un puerto diferente
que los TCP predeterminados (3128, 3401 o 4827), el comando <command>semanage
port</command> debe ser utilizado para agregar el número de puerto requerido a la
política de configuración de SELinux. El ejemplo siguiente enseña cómo configurar a
<systemitem class=\"daemon\">squid</systemitem> para que escuche
sobre un puerto que no ha sido definido inicialmente en la configuración de políticas de
SELinux para <systemitem class=\"daemon\">squid</systemitem>, y como
consecuencia de esto, <systemitem
class=\"daemon\">squid</systemitem> no puede iniciarse. Además, nuestro
ejemplo demuestra como configurar luego el sistema SELinux para permitir que
<systemitem class=\"daemon\">squid</systemitem> pueda escuchar
exitosamente sobre un puerto no estándar que aún no haya sido definido en la política.
Nuestr
o ejemplo presupone que el paquete <package>squid</package> se encuentra
instalado. Ejecute cada comando como usuario root: "
#. Tag: para
#, no-c-format
@@ -224,7 +227,7 @@
msgstr "También, la siguiente negación SELinux es registrada en
<filename>/var/log/messages</filename>:"
#. Tag: screen
-#, fuzzy, no-c-format
+#, no-c-format
msgid ""
"\n"
"localhost setroubleshoot: SELinux is preventing the squid (squid_t) from binding to
port 1000. For complete SELinux messages. run sealert -l
97136444-4497-4fff-a7a7-c4d8442db982\n"
@@ -265,7 +268,7 @@
#. Tag: para
#, no-c-format
msgid "Now that SELinux has been configured to allow <systemitem
class=\"daemon\">squid</systemitem> to listen on a non-standard port
(TCP 10000 in this example), <systemitem
class=\"daemon\">squid</systemitem> starts successfully on this
port."
-msgstr ""
+msgstr "Ahora que SELinux ha sido configurado para permitir que <systemitem
class=\"daemon\">squid</systemitem> escuche sobre un puerto TCP no
estándar (TCP 1000 en nuestro ejemplo), <systemitem
class=\"daemon\">squid</systemitem> se inicia exitosamente en tal
puerto."
#. Tag: title
#, no-c-format
@@ -290,7 +293,7 @@
#. Tag: para
#, no-c-format
msgid "This type is used for utilities such as
<filename>cachemgr.cgi</filename>, which provides a variety of statistics
about squid and its configuration."
-msgstr ""
+msgstr "Este tipo es utilizado con herramientas como
<filename>cachemgr.cgi</filename>, que ofrecen una variedad de estadísticas
acerca de squid y de su configuración."
#. Tag: term
#, no-c-format
@@ -300,7 +303,7 @@
#. Tag: para
#, no-c-format
msgid "Use this type for data that is cached by squid, as defined by the
<command>cache_dir</command> directive in
<filename>/etc/squid/squid.conf</filename>. By default, files created in or
copied into <filename>/var/cache/squid</filename> and
<filename>/var/spool/squid</filename> are labeled with the
<computeroutput>squid_cache_t</computeroutput> type. Files for the <ulink
url=\"http://www.squidguard.org/\">squidGuard</ulink> URL redirector
plugin for <systemitem class=\"daemon\">squid</systemitem> created
in or copied to <filename>/var/squidGuard</filename> are also labeled with the
<computeroutput>squid_cache_t</computeroutput> type. Squid is only able to use
files and directories that are labeled with this type for its cached data."
-msgstr ""
+msgstr "Utilice este tipo para los datos que hayan sido cacheados por squid, como se
define en la directiva <command>cache_dir</command> en el archivo
<filename>/etc/squid/squid.conf</filename>. Por defecto, los archivos creados
o copiados en <filename>/var/cache/squid</filename> y en
<filename>/var/spool/squid</filename> son etiquetados con el tipo
<computeroutput>squid_cache_t</computeroutput>. Los archivos para el
complemento <ulink
url=\"http://www.squidguard.org/\">squidGuard</ulink> de <systemitem
class=\"daemon\">squid</systemitem>, creados o copiados en
<filename>/var/squidGuard</filename> también son etiquetados con el tipo
<computeroutput>squid_cache_t</computeroutput>. Para sus datos cacheados,
squid solo es capaz de utilizar archivos y directorios que hayan sido etiquetados con este
tipo."
#. Tag: term
#, no-c-format
@@ -310,7 +313,7 @@
#. Tag: para
#, no-c-format
msgid "This type is used for the directories and files that <systemitem
class=\"daemon\">squid</systemitem> uses for its configuration.
Existing files, or those created in or copied to
<filename>/etc/squid</filename> and
<filename>/usr/share/squid</filename> are labeled with this type, including
error messages and icons."
-msgstr ""
+msgstr "Este tipo es utilizado para archivos y directorios que <systemitem
class=\"daemon\">squid</systemitem> utiliza para su configuración. Los
archivos existentes, o aquellos creados o copiados en
<filename>/etc/squid</filename> y en
<filename>/usr/share/squid</filename>, son etiquetados con este tipo,
incluyendo los íconos y los mensajes de error."
#. Tag: term
#, no-c-format
@@ -330,7 +333,7 @@
#. Tag: para
#, no-c-format
msgid "This type is used for logs. Existing files, or those created in or copied to
<filename>/var/log/squid</filename> or
<filename>/var/log/squidGuard</filename> must be labeled with this
type."
-msgstr ""
+msgstr "Este tipo es utilizado para registros. Los archivos existentes, o aquellos
que hayan sido creados o copiados en <filename>/var/log/squid</filename> o en
<filename>/var/log/squidGuard</filename> deben ser etiquetados con este
tipo."
#. Tag: term
#, no-c-format
@@ -340,7 +343,7 @@
#. Tag: para
#, no-c-format
msgid "This type is used for the initialization file required to start
<systemitem class=\"daemon\">squid</systemitem> which is located at
<filename>/etc/rc.d/init.d/squid</filename>."
-msgstr ""
+msgstr "Este tipo es utilizado para el archivo de inicialización necesario para
lanzar <systemitem class=\"daemon\">squid</systemitem>, que se
encuentra ubicado en <filename>/etc/rc.d/init.d/squid</filename>."
#. Tag: term
#, no-c-format
@@ -350,7 +353,7 @@
#. Tag: para
#, no-c-format
msgid "This type is used by files in <filename>/var/run</filename>,
especially the process id (PID) named <filename>/var/run/squid.pid</filename>
which is created by squid when it runs."
-msgstr ""
+msgstr "Este tipo es utilizado por archivos en
<filename>/var/run</filename>, especialmente los procesos id (PID) denominados
<filename>/var/run/squid.pid</filename>, y que es creado por squid cuando se
encuentra en ejecución. "
#. Tag: title
#, no-c-format
@@ -370,7 +373,7 @@
#. Tag: para
#, no-c-format
msgid "When enabled, this Boolean permits squid to initiate a connection to a remote
host on any port."
-msgstr ""
+msgstr "Cuando se encuentra habilitado, este Booleano permite que squid inicie una
conexión con un equipo remoto sobre cualquier puerto."
#. Tag: term
#, no-c-format
@@ -380,7 +383,7 @@
#. Tag: para
#, no-c-format
msgid "When enabled, this Boolean allows Squid to run as a transparent proxy."
-msgstr ""
+msgstr "Cuando se encuentra habilitado. este Booleano permite que squid se ejecute
como un proxy transparente."
#. Tag: title
#, no-c-format
@@ -395,22 +398,22 @@
#. Tag: para
#, no-c-format
msgid "The following example provides a real-world demonstration of how SELinux
complements Squid by enforcing the above Boolean and by default only allowing access to
certain ports. This example will then demonstrate how to change the Boolean and show that
access is then allowed."
-msgstr ""
+msgstr "El siguiente ejemplo ofrece una demostración de un caso real acerca de cómo
SELinux complementa a Squid al hacer cumplir el Booleano recién mencionado, y permitiendo
acceso de manera predeterminada solo a ciertos puertos. Este ejemplo demostrará entonces
cómo modificar el Booleano, mostrando luego que el acceso es permitido."
#. Tag: para
#, no-c-format
msgid "Note that this is an example only and demonstrates how SELinux can affect a
simple configuration of Squid. Comprehensive documentation of Squid is beyond the scope of
this document. Refer to the official <ulink
url=\"http://www.squid-cache.org/Doc/\">Squid documentation</ulink> for
further details. This example assumes that the Squid host has two network interfaces,
Internet access, and that any firewall has been configured to allow access on the internal
interface using the default TCP port on which Squid listens (TCP 3128)."
-msgstr ""
+msgstr "Tenga en cuenta que este es solo un ejemplo y que demuestra cómo SELinux
puede afectar una configuración básica de Squid. Ofrecer una documentación más completa
relacionada con Squid es algo que se encuentra más allá de los propósitos de este
documento. Consulte la <ulink
url=\"http://www.squid-cache.org/Doc/\">Docuemntación oficial de Squid (en
inglés)</ulink> para obtener mayores detalles. Nuestro ejemplo presupone que el
equipo Squid posee dos interfaces de red, acceso a internet, y que cualquier tipo de
cortafuegos ha sido configurado para permitir acceso a la interfaz interna, mediante la
utilización del puerto TCO predeterminado sobre el que Squid está escuchando (TCP
3128)."
#. Tag: para
#, no-c-format
msgid "As the root user, install the <package>squid</package> package.
Run <command>rpm -q squid</command> to see if the
<package>squid</package> package is installed. If it is not installed, run
<command>yum install squid</command> as the root user to install it."
-msgstr ""
+msgstr "Como usuario root, instale el paquete <package>squid</package>.
Ejecute el comando <command>rpm -q squid</command> para verificar que ya lo
tenga en sus sistema. Si no ha sido instalado, ejecute el comando <command>yum
install squid</command> como usuario root para hacerlo. "
#. Tag: para
#, no-c-format
msgid "Edit the main configuration file,
<filename>/etc/squid/squid.conf</filename> and confirm that the
<computeroutput>cache_dir</computeroutput> directive is uncommented and looks
similar to the following:"
-msgstr ""
+msgstr "Edite el archivo de configuración principal,
<filename>/etc/squid/squid.conf</filename>, y confirme que la directiva
<computeroutput>cache_dir</computeroutput> se encuentre sin comentar y que
parezca similar a la siguiente:"
#. Tag: screen
#, no-c-format
@@ -424,17 +427,17 @@
#. Tag: para
#, no-c-format
msgid "This line specifies the default settings for the
<computeroutput>cache_dir</computeroutput> directive to be used in this
example; it consists of the Squid storage format (ufs), the directory on the system where
the cache resides (/var/spool/squid), the amount of disk space in megabytes to be used for
the cache (100), and finally the number of first-level and second-level cache directories
to be created (16 and 256 respectively)."
-msgstr ""
+msgstr "Esta línea indica las configuraciones predeterminadas para la directiva
<computeroutput>cache_dir</computeroutput> a ser utilizadas en nuestro
ejemplo. Está compuesta por el formato de almacenamiento de Squid (ufs), el directorio del
sistema donde reside el caché (/var/spool/squid), la cantidad de espacio en disco en
megabytes a ser utilizada por el caché (100), y por último, la cantidad de directorios de
caché de primer y segundo nivel a ser creados (16 y 256 respectivamente)."
#. Tag: para
#, no-c-format
msgid "In the same configuration file, make sure the
<computeroutput>http_access allow localnet</computeroutput> directive is
uncommented. This allows traffic from the
<computeroutput>localnet</computeroutput> ACL which is automatically
configured in a default installation of Squid on Fedora 13. It will allow client machines
on any existing RFC1918 network to have access through the proxy, which is sufficient for
this simple example."
-msgstr ""
+msgstr "En el mismo archivo de configuración, asegúrese que la directiva
<computeroutput>http_access allow localnet</computeroutput> no se encuentre
comentada. Esto permite el tráfico desde
<computeroutput>localnet</computeroutput> ACL, que es automáticamente
configurada en una instalación predeterminada de Squid en Fedora 13. Permitirá que las
máquinas cliente de cualquier red RFC1918 existente tengan acceso a través del proxy, lo
que que a los efectos de nuestro ejemplo es suficiente. "
#. Tag: para
#, no-c-format
msgid "In the same configuration file, make sure the
<computeroutput>visible_hostname</computeroutput> directive is uncommented and
is configured to the hostname of the machine. The value should be the fully qualified
domain name (FQDN) of the host:"
-msgstr ""
+msgstr "En el mismo archivo de configuración, asegúrese que la directiva
<computeroutput>visible_hostname</computeroutput> no se encuentre comentada y
que esté configurada con el nombre de equipo de la máquina. El valor debería ser el nombre
del dominio totalmente calificado del equipo (FQDN, por las iniciales en inglés de fully
qualified domain name);"
#. Tag: screen
#, no-c-format
@@ -448,7 +451,7 @@
#. Tag: para
#, no-c-format
msgid "As the root user, run <command>service squid start</command> to
start <systemitem class=\"daemon\">squid</systemitem>. As this is
the first time <systemitem class=\"daemon\">squid</systemitem> has
started, this command will initialise the cache directories as specified above in the
<computeroutput>cache_dir</computeroutput> directive and will then start the
<systemitem class=\"daemon\">squid</systemitem> daemon. The output
is as follows if <systemitem class=\"daemon\">squid</systemitem>
starts successfully:"
-msgstr ""
+msgstr "Como usuario root, ejecute el comando <command>service squid
start</command> para iniciar <systemitem
class=\"daemon\">squid</systemitem>. Como esta es la primera vez que
<systemitem class=\"daemon\">squid</systemitem> se ha iniciado, este
comando inicializará los directorios de caché como se ha indicado recién en la directiva
de <computeroutput>cache_dir</computeroutput>, y entonces iniciará el demonio
<systemitem class=\"daemon\">squid</systemitem>. El resultado lo
indicamos a continuación, si es que <systemitem
class=\"daemon\">squid</systemitem> se ha iniciado exitosamente:"
#. Tag: screen
#, no-c-format
@@ -464,7 +467,7 @@
#. Tag: para
#, no-c-format
msgid "Confirm that the <systemitem
class=\"daemon\">squid</systemitem> process ID (PID) has started as a
confined service, as seen here by the
<computeroutput>squid_var_run_t</computeroutput> value:"
-msgstr ""
+msgstr "Verifique que el proceso ID (PID) <systemitem
class=\"daemon\">squid</systemitem> se haya iniciado como un servicio
confinado, del mismo modo en que aquí puede observarse en el valor
<computeroutput>squid_var_run_t</computeroutput>:"
#. Tag: screen
#, no-c-format
@@ -480,12 +483,12 @@
#. Tag: para
#, no-c-format
msgid "At this point, a client machine connected to the
<computeroutput>localnet</computeroutput> ACL configured earlier is
successfully able to use the internal interface of this host as its proxy. This can be
configured in the settings for all common web browsers, or system-wide. Squid is now
listening on the default port of the target machine (TCP 3128), but the target machine
will only allow outgoing connections to other services on the Internet via common ports.
This is a policy defined by SELinux itself. SELinux will deny access to non-standard
ports, as shown in the next step:"
-msgstr ""
+msgstr "En este punto, una máquina de cliente conectada en la
<computeroutput>localnet</computeroutput> ACL anteriormente configurada, podrá
de manera exitosa ser capaz de utilizar la interfaz interba de este equipo como su propio
proxy. Esto puede ser configurado en las configuraciones de todos los navegadores web más
utilizados, o en todo el sistema. Squid ahora está escuchando sobre el puerto
predeterminado de la máquina elegida (TCP 3128), pero la máquina elegida sólo permitirá
conexiones salientes de otros servicios a Internet mediante los puertos comunes. Esta es
una política definida por SELinux. SELinux negará el acceso a puertos no estándar, como se
muestra en el paso siguiente:"
#. Tag: para
#, no-c-format
msgid "When a client makes a request using a non-standard port through the Squid
proxy such as a website listening on TCP port 10000, a denial similar to the following is
logged:"
-msgstr ""
+msgstr "Cuando un cliente realice una petición utilizando un puerto no estándar a
través del proxy Squid, como ser, por ejemplo, un sitio web escuchando en el puerto TCP
1000, se registra una negación similar a la siguiente:"
#. Tag: screen
#, no-c-format
@@ -499,7 +502,7 @@
#. Tag: para
#, no-c-format
msgid "To allow this access, the
<computeroutput>squid_connect_any</computeroutput> Boolean must be modified,
as it is disabled by default. To turn the
<computeroutput>squid_connect_any</computeroutput> Boolean on, run the
following command as the root user:"
-msgstr ""
+msgstr "Para permitir este acceso, el Booleano
<computeroutput>squid_connect_any</computeroutput> debe ser modificado, ya que
se encuentra deshabilitado en forma predeterminada. Para encender el Booleano
<computeroutput>squid_connect_any</computeroutput>, ejecute el siguiente
comando como usuario root:"
#. Tag: screen
#, no-c-format
@@ -509,10 +512,10 @@
#. Tag: para
#, no-c-format
msgid "Do not use the <option>-P</option> option if you do not want
<command>setsebool</command> changes to persist across reboots."
-msgstr "No use la opción <option>-P</option> si no quiere los cambios en
<command>setsebool</command> persistan al reinicio."
+msgstr "No utilice la opción <option>-P</option> si no desea que las
modificaciones de <command>setsebool</command> permanezcan vigentes luego de
reiniciar el equipo."
#. Tag: para
#, no-c-format
msgid "The client will now be able to access non-standard ports on the Internet as
Squid is now permitted to initiate connections to any port, on behalf of its
clients."
-msgstr ""
+msgstr "El cliente ahora será capaz de acceder a puertos no estándar de Internet, ya
que ahora Squid tiene permitido iniciar conexiones sobre cualquier puerto, en nombre de
sus clientes."