commit a2c12a6125ee9b8af2a29250d4107784fd4e530a
Author: Petr Bokoc <pbokoc(a)redhat.com>
Date: Wed Sep 2 16:50:12 2015 +0200
Clean up Installation
en-US/Installation.xml | 144 ++----------------------------------------------
1 files changed, 5 insertions(+), 139 deletions(-)
---
diff --git a/en-US/Installation.xml b/en-US/Installation.xml
index 2f2ee53..76ef7b8 100644
--- a/en-US/Installation.xml
+++ b/en-US/Installation.xml
@@ -9,156 +9,22 @@
<section id="sect-installer-general">
<title>General Anaconda Changes</title>
- <itemizedlist>
- <listitem>
- <para>
- Development of the <application>Anaconda</application> installer and
related components such as <package>pykickstart</package>,
<package>pyparted</package> and <package>initial-setup</package>
has been moved from Fedorahostedg to Github (<ulink
url="https://github.com/rhinstaller" />).
- </para>
- </listitem>
- <listitem>
- <para>
- Full documentation of Kickstart commands and options is now in the
rhinstaller/pykickstart Github repository as well: <ulink
url="https://github.com/rhinstaller/pykickstart/blob/master/docs/kic...
/>. The version on the Fedora Wiki has been removed. Keeping the documentation in the
Git repository will allow the development team to maintain multiple, more accurate
versions of documentation matching with various releases of
<systemitem>pykickstart</systemitem>.
- </para>
- </listitem>
- <listitem>
- <para>
- The localization effort for <application>Anaconda</application> has
migrated from Transifex to <ulink
url="https://fedora.zanata.org/project/view/anaconda">Zanata...;.
- </para>
- </listitem>
- <listitem>
- <para>
- The new <application>DNF</application> package manager is now used to
install packages. You can use the <option>inst.nodnf</option> option to revert
back to <application>Yum</application> if needed. See <xref
linkend="dnf" /> for more information about
<application>DNF</application>.
- </para>
- </listitem>
- </itemizedlist>
+
</section>
<section id="sect-installer-gui">
<title>Changes in Anaconda's Graphical Interface</title>
- <itemizedlist>
- <listitem>
- <para>
- The advanced storage section of the <guilabel>Manual
Partitioning</guilabel> screen now allows adding zFCP storage devices. The screen
also now has a <guilabel>Refresh</guilabel> button, allowing you to refresh
the list of network (iSCSI, FCoE, etc.) storage devices without having to leave the
screen.
- </para>
- </listitem>
- <listitem>
- <para>
- The graphical interface now has animated transitions when moving back and forth
between screens. This improvement aims to improve user experience by emphasizing the
relationship between the main menu (<guilabel>Installation Summary</guilabel>)
and other screens.
- </para>
- </listitem>
- <listitem>
- <para>
- <application>Anaconda</application> is now maximized, instead of
full-screen, when running on top of a desktop (e.g. when installing from a Live DVD).
- </para>
- </listitem>
- <listitem>
- <para>
- When changing the settings on an existing connection in the <guilabel>Network
& Hostname</guilabel> screen, you no longer have to turn the connection on
and off for the changes to take effect.
- </para>
- </listitem>
- </itemizedlist>
+
</section>
<section id="sect-installer-options">
<title>Changes in Anaconda Boot Options</title>
- <itemizedlist>
- <listitem>
- <para>
- The <option>inst.dnf</option> boot option, which was added in
Fedora 21, has been replaced by the <option>inst.nodnf</option>
option, which behaves in an opposite way. Use <option>inst.nodnf</option> to
force the installer to use the older <application>Yum</application> package
manager to install packages instead of <application>DNF</application>, which
is now default.
- </para>
- </listitem>
- <listitem>
- <para>
- A new option, <option>inst.kdump_addon=</option>, has been added. Use
<option>inst.kdump_addon=on</option> to enable the
<application>Kdump</application> configuration add-on in the graphical and
text user interface as well as in Kickstart. The
<application>Kdump</application> configuration screen is disabled by default.
- </para>
- </listitem>
- </itemizedlist>
+
</section>
<section id="sect-installer-kickstart">
- <title>Changes in Kickstart Syntax</title>
- <itemizedlist>
- <listitem>
- <para>
- The <option>--nobase</option> option for the
<command>%packages</command> section has been removed.
- </para>
- </listitem>
- <listitem>
- <para>
- New command: <command>sshkey</command>. Use this command to install a
SSH key to the <filename>authorized_keys</filename> file for a specified user
using the following syntax:
- </para>
- <programlisting>
-<command>sshkey --username=<replaceable>user</replaceable>
"<replaceable>ssh_key</replaceable>"</command>
- </programlisting>
- <para>
- Replace <replaceable>user</replaceable> with the user name, and
<replaceable>ssh_key</replaceable> with the SSH key. The key must be enclosed
in quotes because it may contain spaces. Also note that the user must either be
<systemitem>root</systemitem>, or it must exist (must be created by the
<command>user</command> command in the Kickstart file, or by a package
specified in the <command>%packages</command> section).
- </para>
- </listitem>
- <listitem>
- <para>
- New section: <command>%anaconda</command>. This section can now be used
in a Kickstart file to control the behavior of the installer, but not the installed
system. Currently, the only command supported in this section is
<command>pwpolicy</command>, described below. This section must end with an
<command>%end</command> statement.
- </para>
- </listitem>
- <listitem>
- <para>
- New command: <command>pwpolicy</command>. This command sets password
requirements such as minimum length for a named password entry.
- </para>
- <programlisting>
-<command>pwpolicy <replaceable>name</replaceable>
[--minlen=<replaceable>LENGTH</replaceable>]
[--minquality=<replaceable>QUALITY</replaceable>] [--strict|notstrict]
[--emptyok|notempty] [--changesok|nochanges]</command>
- </programlisting>
- <para>
- Replace <replaceable>name</replaceable> with one of the following:
<literal>root</literal>, <literal>user</literal>, or
<literal>luks</literal>, to set a policy for the root password, user
passwords, or LUKS (disk encryption) password.
- </para>
- <para>
- Available options are:
- </para>
- <itemizedlist>
- <listitem>
- <para>
- <option>--minlen=</option> - The minimum allowed password length. This
parameter will be passed to the <systemitem>libpwquality</systemitem> library.
The default minimum length is <literal>8</literal>.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--minquality=</option> - Minimum allowed quality of the
password, as calculated by <systemitem>libpwquality</systemitem>. If the
<option>--strict</option> option is used, passwords with lower quality will
not be allowed. If <option>--notstrict</option> is used, using a password of
lower than specified quality will display a warning require the user to click
<guilabel>Done</guilabel> twice in the graphical user interface to confirm.
The default quality value is <literal>50</literal>.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--strict</option> - Passwords with lower quality than
specified in <option>--minquality</option> will be rejected completely. This
is the default.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--notstrict</option> - Passwords with lower quality than
specified in <option>--minquality</option> will be accepted, but
<application>Anaconda</application> will display a warning and require the
user to click <guilabel>Done</guilabel> twice before accepting the password.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--emptyok</option> - Allow empty passwords. This is the
default.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--notempty</option> - Do not allow empty passwords.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--changesok</option> - Allow changing a password
pre-configured in the Kickstart file to be changed interactively in the graphical user
interface.
- </para>
- </listitem>
- <listitem>
- <para>
- <option>--nochanges</option> - Passwords set in the Kickstart file can
not be changed in the GUI. This is the default.
- </para>
- </listitem>
- </itemizedlist>
- <para>
- The defaults are set in the
<filename>/usr/share/anaconda/interactive-defaults.ks</filename> file provided
by <application>Anaconda</application> on installation media. To override the
default Kickstart file (and therefore change the installer's password policy), a
<filename>product.img</filename> file with a separate
<command>%anaconda</command> section must be created and passed to
<application>Anaconda</application>.
- </para>
- </listitem>
- </itemizedlist>
+ <title>Changes in Kickstart Syntax</title>
+
</section>
</section>
--
docs-commits mailing list
docs-commits(a)lists.fedoraproject.org
http://lists.fedoraproject.org/postorius/docs-commits@lists.fedoraproject...