[system-administrators-guide/21] grub2 install distinguish BIOS and UEFI
by stephenw
commit 4925b52870b1639d24703f8988c06d5ef92c9043
Author: Stephen Wadeley <swadeley(a)redhat.com>
Date: Thu May 14 21:30:06 2015 +0200
grub2 install distinguish BIOS and UEFI
Bug 1220066 - grub2-install suggestion doesn't distinguish between BIOS
and UEFI installs
Thank you Chris Murphy for raising this bug.
Thank you Peter Jones for advice.
en-US/Working_with_the_GRUB_2_Boot_Loader.xml | 30 +++++++++++++++++-------
1 files changed, 21 insertions(+), 9 deletions(-)
---
diff --git a/en-US/Working_with_the_GRUB_2_Boot_Loader.xml b/en-US/Working_with_the_GRUB_2_Boot_Loader.xml
index 8a3d2d9..4baba8c 100644
--- a/en-US/Working_with_the_GRUB_2_Boot_Loader.xml
+++ b/en-US/Working_with_the_GRUB_2_Boot_Loader.xml
@@ -519,22 +519,34 @@ password_pbkdf2 john grub.pbkdf2.sha512.10000.19074739ED80F115963D984BDCB35AA671
</para>
</listitem>
</itemizedlist>
- <section id="sec-Using_the_grub2-install_Command">
- <title>Using the grub2-install Command</title>
+
+ <section id="sec-grub2-reinstall_on_BIOS-Based_Machines">
+ <title>Reinstalling GRUB 2 on BIOS-Based Machines</title>
<para>
- When using the <command>grub2-install</command> command, the boot information is updated and missing files are restored. Note that the files are restored only if they are not corrupted. If the <filename class="directory">/boot/grub2/</filename> directory is missing, it will be recreated.
- </para>
+ When using the <command>grub2-install</command> command, the boot information is updated and missing files are restored. Note that the files are restored only if they are not corrupted.
+ </para>
<para>
- Use the <command>grub2-install <device></command> command to reinstall GRUB 2 if the system is operating normally. For example:
+ Use the <command>grub2-install <replaceable>device</replaceable></command> command to reinstall GRUB 2 if the system is operating normally. For example, if <filename>sda</filename> is your <replaceable>device</replaceable>:
</para>
<screen>~]# <command>grub2-install</command> <filename>/dev/sda</filename></screen>
- <!-- grub2-install should be sufficient here
- -->
-
</section>
+ <section id="sec-grub2-reinstall_on_UEFI-Based_Machines">
+ <title>Reinstalling GRUB 2 on UEFI-Based Machines</title>
+ <para>
+ When using the <command>yum reinstall grub2-efi shim</command> command, the boot information is updated and missing files are restored. Note that the files are restored only if they are not corrupted.
+ </para>
+ <para>
+ Use the <command>yum reinstall grub2-efi shim</command> command to reinstall GRUB 2 if the system is operating normally. For example:
+ </para>
+
+<screen>~]# <command>yum reinstall grub2-efi shim</command></screen>
+
+ </section>
+
+
<section id="sec-Resetting_and_Reinstalling_GRUB_2">
<title>Resetting and Reinstalling GRUB 2</title>
<para>
@@ -578,7 +590,7 @@ password_pbkdf2 john grub.pbkdf2.sha512.10000.19074739ED80F115963D984BDCB35AA671
</step>
<step>
<para>
- Now follow the procedure in <xref linkend="sec-Using_the_grub2-install_Command" /> to restore GRUB2 on the <filename>/boot/</filename> partition.
+ Now follow the procedure in <xref linkend="sec-Reinstalling_GRUB_2" /> to restore GRUB2 on the <filename>/boot/</filename> partition.
</para>
</step>
</procedure>
9 years
[system-administrators-guide] grub2 install distinguish BIOS and UEFI
by stephenw
commit da159560f733d2bd44479dd3452a52d67579630e
Author: Stephen Wadeley <swadeley(a)redhat.com>
Date: Thu May 14 21:30:06 2015 +0200
grub2 install distinguish BIOS and UEFI
Bug 1220066 - grub2-install suggestion doesn't distinguish between BIOS
and UEFI installs
Thank you Chris Murphy for raising this bug.
Thank you Peter Jones for advice.
en-US/Working_with_the_GRUB_2_Boot_Loader.xml | 30 +++++++++++++++++-------
1 files changed, 21 insertions(+), 9 deletions(-)
---
diff --git a/en-US/Working_with_the_GRUB_2_Boot_Loader.xml b/en-US/Working_with_the_GRUB_2_Boot_Loader.xml
index 8a3d2d9..4baba8c 100644
--- a/en-US/Working_with_the_GRUB_2_Boot_Loader.xml
+++ b/en-US/Working_with_the_GRUB_2_Boot_Loader.xml
@@ -519,22 +519,34 @@ password_pbkdf2 john grub.pbkdf2.sha512.10000.19074739ED80F115963D984BDCB35AA671
</para>
</listitem>
</itemizedlist>
- <section id="sec-Using_the_grub2-install_Command">
- <title>Using the grub2-install Command</title>
+
+ <section id="sec-grub2-reinstall_on_BIOS-Based_Machines">
+ <title>Reinstalling GRUB 2 on BIOS-Based Machines</title>
<para>
- When using the <command>grub2-install</command> command, the boot information is updated and missing files are restored. Note that the files are restored only if they are not corrupted. If the <filename class="directory">/boot/grub2/</filename> directory is missing, it will be recreated.
- </para>
+ When using the <command>grub2-install</command> command, the boot information is updated and missing files are restored. Note that the files are restored only if they are not corrupted.
+ </para>
<para>
- Use the <command>grub2-install <device></command> command to reinstall GRUB 2 if the system is operating normally. For example:
+ Use the <command>grub2-install <replaceable>device</replaceable></command> command to reinstall GRUB 2 if the system is operating normally. For example, if <filename>sda</filename> is your <replaceable>device</replaceable>:
</para>
<screen>~]# <command>grub2-install</command> <filename>/dev/sda</filename></screen>
- <!-- grub2-install should be sufficient here
- -->
-
</section>
+ <section id="sec-grub2-reinstall_on_UEFI-Based_Machines">
+ <title>Reinstalling GRUB 2 on UEFI-Based Machines</title>
+ <para>
+ When using the <command>yum reinstall grub2-efi shim</command> command, the boot information is updated and missing files are restored. Note that the files are restored only if they are not corrupted.
+ </para>
+ <para>
+ Use the <command>yum reinstall grub2-efi shim</command> command to reinstall GRUB 2 if the system is operating normally. For example:
+ </para>
+
+<screen>~]# <command>yum reinstall grub2-efi shim</command></screen>
+
+ </section>
+
+
<section id="sec-Resetting_and_Reinstalling_GRUB_2">
<title>Resetting and Reinstalling GRUB 2</title>
<para>
@@ -578,7 +590,7 @@ password_pbkdf2 john grub.pbkdf2.sha512.10000.19074739ED80F115963D984BDCB35AA671
</step>
<step>
<para>
- Now follow the procedure in <xref linkend="sec-Using_the_grub2-install_Command" /> to restore GRUB2 on the <filename>/boot/</filename> partition.
+ Now follow the procedure in <xref linkend="sec-Reinstalling_GRUB_2" /> to restore GRUB2 on the <filename>/boot/</filename> partition.
</para>
</step>
</procedure>
9 years
[amateur-radio-guide] Updated dnf (formerly yum) portion of the Installing Software appendix
by John J. McDonough
commit 372b8990771c24c99ff11eb28fcf8b53fa562f45
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Fri May 8 11:33:57 2015 -0400
Updated dnf (formerly yum) portion of the Installing Software appendix
en-US/Installing_Software.xml | 149 ++++++++++++++++++++++-------------------
1 files changed, 79 insertions(+), 70 deletions(-)
---
diff --git a/en-US/Installing_Software.xml b/en-US/Installing_Software.xml
index bda307c..f82bc72 100644
--- a/en-US/Installing_Software.xml
+++ b/en-US/Installing_Software.xml
@@ -8,10 +8,10 @@
<para>
There are basically two ways to install software from the Fedora
repositories; from the GUI using <package>PackageKit</package> and
- from the command line using <package>yum</package>. Because the
- <package>yum</package> approach is simpler, throughout this
+ from the command line using <package>dnf</package>. Because the
+ <package>dnf</package> approach is simpler, throughout this
document we describe that method. However, there are a number of
- details with respect to <package>yum</package> that are useful to
+ details with respect to <package>dnf</package> that are useful to
know, and some users feel more comfortable with a graphical user
interface. Hence, this appendix.
</para>
@@ -173,10 +173,10 @@
</para>
</section>
<section>
- <title>Installing Software with yum</title>
+ <title>Installing Software with dnf</title>
<para>
Unlike PackageKit, where the system administrator may choose to
- allow non-administrative users to install software, yum requires
+ allow non-administrative users to install software, dnf requires
administrator authentication. There are three ways this can be
done:
<itemizedlist>
@@ -187,8 +187,9 @@
<screen>
[jjmcd@Cimbaoth ~]$ su -
Password:
-[root@Cimbaoth ~]# yum install xastir
-Loaded plugins: presto, refresh-packagekit
+[root@Cimbaoth ~]# dnf install xastir
+Last metadata expiration check performed 0:01:58 ago on Fri May 8 11:11:35 2015
+
...
</screen>
</para>
@@ -203,12 +204,13 @@ Loaded plugins: presto, refresh-packagekit
<para>
You may use the <command>su</command> command with the
<command>-c</command> switch. This allows you to enter
- the single <command>yum</command> command as root, but
+ the single <command>dnf</command> command as root, but
immediately switches back to your normal user:
<screen>
-[jjmcd@Cimbaoth ~]$ su - 'yum install fldigi'
+[jjmcd@Cimbaoth ~]$ su - 'dnf install fldigi'
Password:
-Loaded plugins: presto, refresh-packagekit
+Last metadata expiration check performed 0:01:58 ago on Fri May 8 11:11:35 2015
+
...
</screen>
</para>
@@ -225,8 +227,8 @@ Loaded plugins: presto, refresh-packagekit
<filename>sudoers</filename> file, you may use the
<command>sudo</command> command:
<screen>
-[jjmcd@Cimbaoth ~]$ sudo yum install wxapt
-Loaded plugins: presto, refresh-packagekit
+[jjmcd@Cimbaoth ~]$ sudo dnf install wxapt
+Last metadata expiration check performed 0:01:58 ago on Fri May 8 11:11:35 2015.
...
</screen>
</para>
@@ -245,42 +247,28 @@ Loaded plugins: presto, refresh-packagekit
</itemizedlist>
</para>
<para>
- <command>yum</command> may determine that additional packages
- must be installed. <command>yum</command> will list these
+ <command>dnf</command> may determine that additional packages
+ must be installed. <command>dnf</command> will list these
packages and calculate the total size of the download. It will
then ask you whether you want to actually download and install
this package or group of packages:
<screen>
-[jjmcd@Cimbaoth ~]$ sudo yum install trustedqsl
-Loaded plugins: presto, refresh-packagekit
-Setting up and reading Presto delta metadata
-Setting up Install Process
-Resolving Dependencies
---> Running transaction check
----> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated
---> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386
---> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386
---> Running transaction check
----> Package tqsllib.i386 0:2.0-5.fc10 set to be updated
---> Finished Dependency Resolution
-
-Dependencies Resolved
-
+[jjmcd@Cimbaoth ~]$ sudo dnf install trustedqsl
+Last metadata expiration check performed 0:09:44 ago on Fri May 8 11:11:35 2015.
+Dependencies resolved.
================================================================================
- Package Arch Version Repository Size
+ Package Arch Version Repository Size
================================================================================
Installing:
- trustedqsl i386 1.11-3.fc10 updates 557 k
-Installing for dependencies:
- tqsllib i386 2.0-5.fc10 updates 167 k
+ tqsllib x86_64 2.4-7.fc22 fedora 157 k
+ trustedqsl x86_64 2.0.3-6.fc22 fedora 1.6 M
Transaction Summary
================================================================================
-Install 2 Package(s)
-Update 0 Package(s)
-Remove 0 Package(s)
+Install 2 Packages
-Total download size: 723 k
+Total download size: 1.8 M
+Installed size: 16 M
Is this ok [y/N]:
</screen>
Answer <command>y</command> or <command>N</command> depending on
@@ -289,50 +277,71 @@ Is this ok [y/N]:
<section>
<title>Searching for Software</title>
<para>
- <command>yum</command> gives you a number of choices for
+ <command>dnf</command> gives you a number of choices for
locating software you desire. To find information about a
package you do not need to provide credentials. Any user may
look up information about a package. You may search for
- specific words in the description using <command>yum
+ specific words in the description using <command>dnf
search</command>:
<screen>
-[jjmcd@Cimbaoth ~]$ yum search APRS
-Loaded plugins: presto, refresh-packagekit
-Setting up and reading Presto delta metadata
-================================ Matched: APRS =================================
-aprsd.i386 : Internet gateway and client access to amateur radio APRS packet
- : data
-xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio
+[jjmcd@Cimbaoth ~]$ dnf search APRS
+Last metadata expiration check performed 0:00:01 ago on Fri May 8 11:22:55 2015.
+============================== N/S Matched: APRS ===============================
+aprsd.x86_64 : Internet gateway and client access to amateur radio APRS packet
+ : data
+aprsdigi.x86_64 : AX.25 Automatic Position Reporting System
+libfap.i686 : An APRS parser written in C
+libfap.x86_64 : An APRS parser written in C
[jjmcd@Cimbaoth ~]$
</screen>
- <command>yum</command> will return the names of any package
- with the specified phrase in its description, and a short
- description. You may get a more detailed description of the
- package with the <command>yum info</command> command:
+ <command>dnf</command> will return the names of any package
+ with the specified phrase in its short description, and a short
+ description.
+ </para>
+ <para>
+ Often is is better (but slower) to search the full
+ description, which is accomplished with the <command>search
+ all</command> command.
+<screen>
+[jjmcd@F22WS-beta ~]$ dnf search all APRS
+Last metadata expiration check performed 0:05:18 ago on Fri May 8 11:22:55 2015.
+================================ Matched: APRS =================================
+aprsd.x86_64 : Internet gateway and client access to amateur radio APRS packet
+ : data
+aprsdigi.x86_64 : AX.25 Automatic Position Reporting System
+libfap.i686 : An APRS parser written in C
+libfap.x86_64 : An APRS parser written in C
+xastir.x86_64 : Amateur Station Tracking and Reporting system for amateur radio
+[jjmcd@F22WS-beta ~]$
+</screen>
+ </para>
+ <para>
+ You may get a more detailed description of the
+ package with the <command>dnf info</command> command:
<screen>
-[jjmcd@Cimbaoth ~]$ yum info xastir
-Loaded plugins: presto, refresh-packagekit
-Setting up and reading Presto delta metadata
-Installed Packages
-Name : xastir
-Arch : i386
-Version : 1.9.4
-Release : 5.fc10
-Size : 4.0 M
-Repo : installed
-Summary : Amateur Station Tracking and Reporting system for amateur radio
-URL : http://www.xastir.org
-License : GPLv2+
-Description: Xastir is a graphical application that interfaces HAM radio
- : and internet access to realtime mapping software.
- :
- : Install XASTIR if you are interested in APRS(tm) and HAM radio
- : software.
+[jjmcd@Cimbaoth ~]$ dnf info xastir
+Last metadata expiration check performed 0:00:52 ago on Fri May 8 11:22:55 2015.
+Available Packages
+Name : xastir
+Arch : x86_64
+Epoch : 1
+Version : 2.0.4
+Release : 8.fc22
+Size : 1.3 M
+Repo : fedora
+Summary : Amateur Station Tracking and Reporting system for amateur radio
+URL : http://www.xastir.org
+License : GPLv2+
+Description : Xastir is a graphical application that interfaces HAM radio
+ : and internet access to realtime mapping software.
+ :
+ : Install XASTIR if you are interested in APRS(tm) and HAM radio
+ : software.
[jjmcd@Cimbaoth ~]$
</screen>
- Notice that <command>yum</command> also tells you whether the
- package is installed. Yum also gives you the address of the
+ Notice that <command>dnf</command> also tells you whether the
+ package is installed. Dnf also gives you the address of the
upstream website so you may learn more about the package
before installing it.
</para>
9 years
[amateur-radio-guide] Blatant typo - how did I miss that?
by John J. McDonough
commit e18468df97eec2ad50df9b0ad2c7f223d64eaad6
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Thu May 7 11:45:30 2015 -0400
Blatant typo - how did I miss that?
en-US/rig-gqrx.xml | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
---
diff --git a/en-US/rig-gqrx.xml b/en-US/rig-gqrx.xml
index e235505..dab7576 100644
--- a/en-US/rig-gqrx.xml
+++ b/en-US/rig-gqrx.xml
@@ -17,7 +17,7 @@
the technical details.
</para>
<para>
- <package>gqrx</package> supports a number of popular SRD devices
+ <package>gqrx</package> supports a number of popular SDR devices
including:
<itemizedlist spacing="compact">
<listitem>
9 years
[amateur-radio-guide] Finish up gqrx section
by John J. McDonough
commit 8da12e6bc22a579086a1e24fa5ba3b0d140454f4
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Thu May 7 11:43:06 2015 -0400
Finish up gqrx section
en-US/images/rig-gqrx/gqrx-gradient.png | Bin 0 -> 4086 bytes
en-US/images/rig-gqrx/gqrx-no-gradient.png | Bin 0 -> 3216 bytes
en-US/images/rig-gqrx/gqrx-rcv-opt.png | Bin 19226 -> 17291 bytes
en-US/images/rig-gqrx/gqrx-wash.png | Bin 0 -> 8688 bytes
en-US/images/rig-gqrx/gqrx-wash.xcf | Bin 0 -> 39854 bytes
en-US/rig-gqrx.xml | 58 ++++++++++++++++++++++++++++
6 files changed, 58 insertions(+), 0 deletions(-)
---
diff --git a/en-US/images/rig-gqrx/gqrx-gradient.png b/en-US/images/rig-gqrx/gqrx-gradient.png
new file mode 100644
index 0000000..2a94c53
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-gradient.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-no-gradient.png b/en-US/images/rig-gqrx/gqrx-no-gradient.png
new file mode 100644
index 0000000..11797c8
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-no-gradient.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-rcv-opt.png b/en-US/images/rig-gqrx/gqrx-rcv-opt.png
index aa441ee..48c9090 100644
Binary files a/en-US/images/rig-gqrx/gqrx-rcv-opt.png and b/en-US/images/rig-gqrx/gqrx-rcv-opt.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-wash.png b/en-US/images/rig-gqrx/gqrx-wash.png
new file mode 100644
index 0000000..d9604b5
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-wash.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-wash.xcf b/en-US/images/rig-gqrx/gqrx-wash.xcf
new file mode 100644
index 0000000..a68e947
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-wash.xcf differ
diff --git a/en-US/rig-gqrx.xml b/en-US/rig-gqrx.xml
index b156df3..e235505 100644
--- a/en-US/rig-gqrx.xml
+++ b/en-US/rig-gqrx.xml
@@ -160,8 +160,20 @@
</figure>
</para>
+ <para>
+ Along the right side of the window are two panels, each of which
+ has two positions. The upper panel defaults to <guilabel>Receiver
+ Options</guilabel> which can be switched to <guilabel>Input
+ controls</guilabel>. The lower panel defaults to
+ <guilabel>Audio</guilabel> but can switch to <guilabel>FFT
+ Settings</guilabel>.
+ </para>
+
<!-- images/rig-gqrx/gqrx-rcv-opt.png - Receiver Options panel -->
<para>
+ The <guilabel>Receiver Options</guilabel> panel allows the user to
+ adjust basic receive settings, filter, mode, AGC, squelch and noise
+ blanker.
<figure float="0">
<title>Receiver Options panel</title>
<mediaobject>
@@ -176,10 +188,14 @@
</textobject>
</mediaobject>
</figure>
+ Next to most controls is a tool button which launches a dialog
+ providing more granular control.
</para>
<!-- images/rig-gqrx/gqrx-mode.png - Mode options -->
<para>
+ The <guilabel>Mode options</guilabel> dialog allows for adjusting
+ specific mode demodulation characteristics.
<figure float="0">
<title>Mode options</title>
<mediaobject>
@@ -198,6 +214,9 @@
<!-- images/rig-gqrx/gqrx-agc.png - AGC settings window -->
<para>
+ The <guilabel>AGC Settings</guilabel> window permits more detailed
+ AGC adjustment than is possible in the <guilabel>Receiver
+ Options</guilabel> panel.
<figure float="0">
<title>AGC settings window</title>
<mediaobject>
@@ -216,6 +235,8 @@
<!-- images/rig-gqrx/gqrx-inp-cntrls.png - Input controls panel -->
<para>
+ The <guilabel>Input controls</guilabel> panel allows for adjusting
+ some of the device settings.
<figure float="0">
<title>Input controls panel</title>
<mediaobject>
@@ -234,6 +255,9 @@
<!-- images/rig-gqrx/gqrx-audio.png - Audio controls panel -->
<para>
+ The <guilabel>Audio</guilabel> panel shows an audio spectral
+ display, along with controls for recording the received audio and
+ adjusting the audio gain.
<figure float="0">
<title>Audio controls panel</title>
<mediaobject>
@@ -252,6 +276,10 @@
<!-- images/rig-gqrx/gqrx-audio-recording.pnd - Audio recording controls -->
<para>
+ When the tool button on the <guilabel>Audio</guilabel> panel is
+ clicked, a dialog is launched to establish the folder to be used
+ for recording audio. The record and play buttons on the panel
+ then reference this location.
<figure float="0">
<title>Audio recording controls</title>
<mediaobject>
@@ -270,6 +298,8 @@
<!-- images/rig-gqrx/gqrx-FFT.png - FFT Settings panel -->
<para>
+ The <guilabel>FFT Settings</guilabel> permits setting the FFT size
+ and rate as well as adjusting the FFT display.
<figure float="0">
<title>FFT Settings panel</title>
<mediaobject>
@@ -284,6 +314,34 @@
</textobject>
</mediaobject>
</figure>
+ The slider labeled <guilabel>Panadapter</guilabel> on the left and
+ <guilabel>WF</guilabel> on the right allows the user to adujst the
+ fraction of the main panel used for the spectral display or the
+ waterfall. Moving toward <guilabel>WF</guilabel> commits more of
+ the display to the waterfall.
+ </para>
+
+ <para>
+ The button labeled <guilabel>F</guilabel> toggles a wash of faint
+ color under the spectral display, called a "gradient" in the tool
+ tip.
+ <figure float="0">
+ <title>FFT Gradient vs. none</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-wash.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ FFT gradient vs. none
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ The <guilabel>Peak</guilabel>, <guilabel>Zoom</guilabel> and
+ <guilabel>Color</guilabel> buttons are self-explanatory.
</para>
+ <para> </para>
</section>
9 years
[amateur-radio-guide] More detail in the gqrx section
by John J. McDonough
commit d9ad6642b71d8df2b26223477129f18b9de9a59d
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Wed May 6 17:04:04 2015 -0400
More detail in the gqrx section
en-US/images/Installing_Software/Software1.png | Bin 0 -> 241306 bytes
en-US/images/Installing_Software/Software2.png | Bin 0 -> 159027 bytes
en-US/images/rig-gqrx/gqrx-AGC.png | Bin 0 -> 13586 bytes
en-US/images/rig-gqrx/gqrx-FFT.png | Bin 0 -> 13974 bytes
en-US/images/rig-gqrx/gqrx-agc.png | Bin 0 -> 13083 bytes
en-US/images/rig-gqrx/gqrx-audio-recording.png | Bin 0 -> 8264 bytes
en-US/images/rig-gqrx/gqrx-audio.png | Bin 0 -> 14015 bytes
en-US/images/rig-gqrx/gqrx-inp-cntrls.png | Bin 0 -> 14730 bytes
en-US/images/rig-gqrx/gqrx-mode.png | Bin 0 -> 6010 bytes
en-US/images/rig-gqrx/gqrx-rcv-opt.png | Bin 0 -> 19226 bytes
en-US/images/rig-gqrx/gqrx-record.png | Bin 0 -> 17527 bytes
en-US/images/rig-gqrx/gqrx-remotesettings.png | Bin 0 -> 10929 bytes
en-US/images/rig-gqrx/gqrx-toolbar.png | Bin 0 -> 7584 bytes
en-US/images/rig-gqrx/gqrx.png | Bin 240846 -> 193161 bytes
en-US/images/rig-gqrx/gqrx01.png | Bin 0 -> 21957 bytes
en-US/rig-gqrx.xml | 217 +++++++++++++++++++++++-
16 files changed, 215 insertions(+), 2 deletions(-)
---
diff --git a/en-US/images/Installing_Software/Software1.png b/en-US/images/Installing_Software/Software1.png
new file mode 100644
index 0000000..cff43d7
Binary files /dev/null and b/en-US/images/Installing_Software/Software1.png differ
diff --git a/en-US/images/Installing_Software/Software2.png b/en-US/images/Installing_Software/Software2.png
new file mode 100644
index 0000000..52d7498
Binary files /dev/null and b/en-US/images/Installing_Software/Software2.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-AGC.png b/en-US/images/rig-gqrx/gqrx-AGC.png
new file mode 100644
index 0000000..ac95c3e
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-AGC.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-FFT.png b/en-US/images/rig-gqrx/gqrx-FFT.png
new file mode 100644
index 0000000..7ff9d2f
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-FFT.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-agc.png b/en-US/images/rig-gqrx/gqrx-agc.png
new file mode 100644
index 0000000..aa71eca
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-agc.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-audio-recording.png b/en-US/images/rig-gqrx/gqrx-audio-recording.png
new file mode 100644
index 0000000..facebd7
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-audio-recording.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-audio.png b/en-US/images/rig-gqrx/gqrx-audio.png
new file mode 100644
index 0000000..97658bd
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-audio.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-inp-cntrls.png b/en-US/images/rig-gqrx/gqrx-inp-cntrls.png
new file mode 100644
index 0000000..3e97195
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-inp-cntrls.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-mode.png b/en-US/images/rig-gqrx/gqrx-mode.png
new file mode 100644
index 0000000..49c97eb
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-mode.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-rcv-opt.png b/en-US/images/rig-gqrx/gqrx-rcv-opt.png
new file mode 100644
index 0000000..aa441ee
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-rcv-opt.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-record.png b/en-US/images/rig-gqrx/gqrx-record.png
new file mode 100644
index 0000000..386687f
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-record.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-remotesettings.png b/en-US/images/rig-gqrx/gqrx-remotesettings.png
new file mode 100644
index 0000000..391d3a2
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-remotesettings.png differ
diff --git a/en-US/images/rig-gqrx/gqrx-toolbar.png b/en-US/images/rig-gqrx/gqrx-toolbar.png
new file mode 100644
index 0000000..08e503b
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx-toolbar.png differ
diff --git a/en-US/images/rig-gqrx/gqrx.png b/en-US/images/rig-gqrx/gqrx.png
index 927579c..f7e9b57 100644
Binary files a/en-US/images/rig-gqrx/gqrx.png and b/en-US/images/rig-gqrx/gqrx.png differ
diff --git a/en-US/images/rig-gqrx/gqrx01.png b/en-US/images/rig-gqrx/gqrx01.png
new file mode 100644
index 0000000..4ec25b0
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx01.png differ
diff --git a/en-US/rig-gqrx.xml b/en-US/rig-gqrx.xml
index 6973fc6..b156df3 100644
--- a/en-US/rig-gqrx.xml
+++ b/en-US/rig-gqrx.xml
@@ -13,8 +13,8 @@
<para>
<package>gqrx</package> is a packaged implementation of
<package>gnuradio</package>. <package>gqrx</package> exploits the
- power of <package>gnuradio</package> without getting into the
- technical details.
+ power of <package>gnuradio</package> without forcing the user into
+ the technical details.
</para>
<para>
<package>gqrx</package> supports a number of popular SRD devices
@@ -73,4 +73,217 @@
</mediaobject>
</figure>
</para>
+<!-- images/rig-gqrx/gqrx01.png - First time first window -->
+ <para>
+ The first time <package>gqrx</package> is started, a
+ <guilabel>Configure I/O devices</guilabel> dialog is shown.
+ <figure float="0">
+ <title>First time first window</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx01.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ First time first window
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ Select the device from the <guilabel>Device</guilabel> dropdown
+ and enter the desired parameters for the device.
+ </para>
+
+<!-- images/rig-gqrx/gqrx-toolbar.png - Toolbar -->
+ <para>
+ The top of the main window shows a toolbar for many common
+ operations. From left to right they are: turn the radio on/off;
+ open the <guilabel>Configure I/O devices</guilabel> dialog; open a
+ settings file; save a settings file; Record an I/Q file or play
+ one back; operate a remote instance; adjust settings for remote
+ access to this instance; and toggle full screen;
+ <figure float="0">
+ <title>Toolbar</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-toolbar.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Toolbar
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+
+<!-- images/rig-gqrx/gqrx-record.png - I/Q recording and playback window -->
+ <para>
+ The <guilabel>I/Q recording and replay tool</guilabel> allows the
+ user to save the I/Q data or play back previously saved data.
+ <figure float="0">
+ <title>I/Q recording and playback window</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-record.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ I/Q recording and playback window
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-remotesettings.png - Remote control settings -->
+ <para>
+ The <guilabel>Gqrx remote control settings</guilabel> dialog
+ controls what remote nodes are permitted access to this instance.
+ <figure float="0">
+ <title>Remote control settings</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-remotesettings.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Remote control settings
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-rcv-opt.png - Receiver Options panel -->
+ <para>
+ <figure float="0">
+ <title>Receiver Options panel</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-rcv-opt.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Receiver Options panel
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-mode.png - Mode options -->
+ <para>
+ <figure float="0">
+ <title>Mode options</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-mode.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Mode options
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-agc.png - AGC settings window -->
+ <para>
+ <figure float="0">
+ <title>AGC settings window</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-agc.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ AGC settings window
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-inp-cntrls.png - Input controls panel -->
+ <para>
+ <figure float="0">
+ <title>Input controls panel</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-inp-cntrls.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Input controls panel
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-audio.png - Audio controls panel -->
+ <para>
+ <figure float="0">
+ <title>Audio controls panel</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-audio.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Audio controls panel
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-audio-recording.pnd - Audio recording controls -->
+ <para>
+ <figure float="0">
+ <title>Audio recording controls</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-audio-recording.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ Audio recording controls
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
+<!-- images/rig-gqrx/gqrx-FFT.png - FFT Settings panel -->
+ <para>
+ <figure float="0">
+ <title>FFT Settings panel</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1" format="PNG"
+ fileref="images/rig-gqrx/gqrx-FFT.png" />
+ </imageobject>
+ <textobject>
+ <para>
+ FFT Settings panel
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+
</section>
9 years
[amateur-radio-guide] Add section on gqrx (F22)
by John J. McDonough
commit e7038733e22298aeb88c02b1c907f43a9a1f48b9
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Wed May 6 09:17:36 2015 -0400
Add section on gqrx (F22)
en-US/images/rig-chirp/chirp007.png | Bin 18287 -> 17553 bytes
en-US/images/rig-gqrx/gqrx.png | Bin 0 -> 240846 bytes
en-US/rig-gqrx.xml | 76 +++++++++++++++++++++++++++++++++++
en-US/rig.xml | 12 ++++-
4 files changed, 85 insertions(+), 3 deletions(-)
---
diff --git a/en-US/images/rig-chirp/chirp007.png b/en-US/images/rig-chirp/chirp007.png
index a2a28e5..a23d49e 100644
Binary files a/en-US/images/rig-chirp/chirp007.png and b/en-US/images/rig-chirp/chirp007.png differ
diff --git a/en-US/images/rig-gqrx/gqrx.png b/en-US/images/rig-gqrx/gqrx.png
new file mode 100644
index 0000000..927579c
Binary files /dev/null and b/en-US/images/rig-gqrx/gqrx.png differ
diff --git a/en-US/rig-gqrx.xml b/en-US/rig-gqrx.xml
new file mode 100644
index 0000000..6973fc6
--- /dev/null
+++ b/en-US/rig-gqrx.xml
@@ -0,0 +1,76 @@
+<?xml version='1.0'?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docarticle/xml/4.5/docarticlex.dtd" [
+]>
+
+<section id="rig-gqrx">
+ <title>gqrx</title>
+ <indexterm>
+ <primary>gqrx</primary>
+ </indexterm>
+ <indexterm>
+ <primary>sdr</primary>
+ </indexterm>
+ <para>
+ <package>gqrx</package> is a packaged implementation of
+ <package>gnuradio</package>. <package>gqrx</package> exploits the
+ power of <package>gnuradio</package> without getting into the
+ technical details.
+ </para>
+ <para>
+ <package>gqrx</package> supports a number of popular SRD devices
+ including:
+ <itemizedlist spacing="compact">
+ <listitem>
+ <para>Funcube Dongle Pro</para>
+ </listitem>
+ <listitem>
+ <para>Funcube Dongle Pro+</para>
+ </listitem>
+ <listitem>
+ <para>USRP devices from Ettus Research</para>
+ </listitem>
+ <listitem>
+ <para>Osmocom rtl-sdr via USB or TCP client</para>
+ </listitem>
+ <listitem>
+ <para>ackRF Jawbreaker by Great Scott Gadgets</para>
+ </listitem>
+ <listitem>
+ <para>RFspace SDR-IP, SDR-IQ and NetSDR</para>
+ </listitem>
+ <listitem>
+ <para>AirSpy</para>
+ </listitem>
+ <listitem>
+ <para>Osmocom MiriSDR</para>
+ </listitem>
+ <listitem>
+ <para>Sysmocom OsmoSDR</para>
+ </listitem>
+ <listitem>
+ <para>Nuand bladeRF</para>
+ </listitem>
+ <listitem>
+ <para>I/Q file source</para>
+ </listitem>
+ </itemizedlist>
+ </para>
+
+
+ <para>
+ <figure float="0">
+ <title>gqrx main window</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="99" scalefit="1"
+ fileref="images/rig-gqrx/gqrx.png" format="PNG"/>
+ </imageobject>
+ <textobject>
+ <para>
+ grig
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </para>
+</section>
diff --git a/en-US/rig.xml b/en-US/rig.xml
index 6f04b03..9e65370 100644
--- a/en-US/rig.xml
+++ b/en-US/rig.xml
@@ -5,11 +5,17 @@
<section id="rig">
<title>Rig Control</title>
<para>
- This section describes rig control applications.
+ This section describes rig control applications.
</para>
- <xi:include href="rig-chirp.xml" xmlns:xi="http://www.w3.org/2001/XInclude" /> <xi:include href="rig-grig.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include href="rig-chirp.xml"
+ xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="rig-hamlib.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include
+ href="rig-gqrx.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include
+ href="rig-grig.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include href="rig-hamlib.xml"
+ xmlns:xi="http://www.w3.org/2001/XInclude" />
</section>
9 years
[amateur-radio-guide] Start cqrlog from icon not old menu
by John J. McDonough
commit e8c5b77b42d43da3e35dcc2960cddc258e748bc9
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Mon May 4 21:47:11 2015 -0400
Start cqrlog from icon not old menu
en-US/images/logging-cqrlog/CQRLOGicon.png | Bin 0 -> 26388 bytes
en-US/logging-cqrlog.xml | 19 ++++++++++++++++---
2 files changed, 16 insertions(+), 3 deletions(-)
---
diff --git a/en-US/images/logging-cqrlog/CQRLOGicon.png b/en-US/images/logging-cqrlog/CQRLOGicon.png
new file mode 100644
index 0000000..0a0bc0b
Binary files /dev/null and b/en-US/images/logging-cqrlog/CQRLOGicon.png differ
diff --git a/en-US/logging-cqrlog.xml b/en-US/logging-cqrlog.xml
index 03dca13..93204ae 100644
--- a/en-US/logging-cqrlog.xml
+++ b/en-US/logging-cqrlog.xml
@@ -16,9 +16,22 @@
<section>
<title>Starting cqrlog</title>
<para>
- <package>cqrlog</package> may be started from the menu by selecting
- <guimenu>Applications->Other->cqrlog</guimenu> or from the command
- line by typing <command>cqrlog</command>.
+ <package>cqrlog</package> may be started by selecting
+ <xref linkend="fig-cqrlogicon" /> from the application
+ grid or from the command line by typing
+ <command>cqrlog</command>.
+ <figure float="0" id="fig-cqrlogicon">
+ <title>cqrlog icon</title>
+ <mediaobject>
+ <imageobject><imagedata scale="50" scalefit="1" fileref="images/logging-cqrlog/CQRLOGicon.png" format="PNG"/></imageobject>
+ <textobject>
+ <para>
+ cqrlog
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
+
</para>
</section>
<section>
9 years
[amateur-radio-guide] Update launching ibp
by John J. McDonough
commit b5fb23d5ff49f9b527019c1e9ce6020be1a0acfe
Author: John J. McDonough <jjmcd(a)fedoraproject.org>
Date: Mon May 4 20:28:41 2015 -0400
Update launching ibp
en-US/images/others-ibp/IBPicon.png | Bin 0 -> 24589 bytes
en-US/others-ibp.xml | 15 +++++++++++++--
2 files changed, 13 insertions(+), 2 deletions(-)
---
diff --git a/en-US/images/others-ibp/IBPicon.png b/en-US/images/others-ibp/IBPicon.png
new file mode 100644
index 0000000..b988812
Binary files /dev/null and b/en-US/images/others-ibp/IBPicon.png differ
diff --git a/en-US/others-ibp.xml b/en-US/others-ibp.xml
index e3078b8..a1c6849 100644
--- a/en-US/others-ibp.xml
+++ b/en-US/others-ibp.xml
@@ -30,9 +30,20 @@ sudo dnf install ibp
<section>
<title>Starting ibp</title>
<para>
- <package>ibp</package> may be started from the menu by selecting
- <guimenu>Applications->Other->ibp</guimenu> or from the command
+ <package>ibp</package> may be started by clicking the icon from
+ the application grid or from the command
line by typing <command>ibp</command>.
+ <figure float="0">
+ <title>ibp - icon</title>
+ <mediaobject>
+ <imageobject><imagedata scale="50" scalefit="1" fileref="images/others-ibp/IBPicon.png" format="PNG"/></imageobject>
+ <textobject>
+ <para>
+ International Beacon Project
+ </para>
+ </textobject>
+ </mediaobject>
+ </figure>
</para>
<para>
9 years