Jeremy,
Worked great on my old standby G4 system...
PowerMac 3,1
400MHz cpu 7400, altivec supported
motherboard: PowerMac3,1 MacRISC2
PowerMac G4 AGP Graphics
ATI Rage 128 PF/Pro AGP 4x TMDS
Never got to boot the kernel on my iMac G5 ....
Got this instead... (this may be expected behavior for the 64bit G5
though)
... ok
opening display /pci@0,f0000000 /NVDA, Parent@10/NVDA,Display-B@1... ok
copying 0F device tree...done
Initializing fake screen: NVDA,Display-A
Calling quiesce ...
returning 0x01400000 from prom_init
Invalid memory access at %SRR0: 00000000.01403b7c %SRR1:
100000000.00083030
Apple PowerMac8,1 5.2.2f1 BootROM build on 08/18/04 at 16:38:24
.
.
<snip>
.
.
To continue booting type "mac-boot" and press return
Please find attached the OS X 'system profile' of the G5 if you need
it...
I'll try my G4 Powerbook 1GHz when I get home.
Hope this helps,
Jim...
On May 2, 2005, at 5:21 PM, Jeremy Katz wrote:
Hi. I've got an ISO for quick testing of anaconda's X
configuration
setup available that's a little bit smaller than a full tree. All you
should have to do is download the ISO, burn it to a CD, boot and see if
X starts up. Then, you can reboot and go back to your normal doings.
Note that this is entirely non-destructive. So you can even run it if
you are running OS X. *ANY* results would be helpful. Please be sure
to include what you see happen as well as what type of hardware you're
using (cpu, video, monitor).
The iso is located at
http://people.redhat.com/~katzj/mac-x-test.iso.
The md5sum is 34234b3cdf2d89e4e94031a50f819285
Thanks in advance for testing this and helping to make test3 (and thus,
the Fedora Core 4 release) better on PPC hardware!
Jeremy
_______________________________________________
Fedora-ppc mailing list
Fedora-ppc(a)lists.infradead.org
http://lists.infradead.org/mailman/listinfo/fedora-ppc