On 07/02/2012 07:20 PM, thus Gustavo Luiz Duarte spake:
There is a bug on anaconda that if your *first* network device
doesn't have an IP address anaconda will crash. You may be hitting
this issue in case your DHCP has MAC to IP address mapping or in case
you are setting up network manually.
There is a patch, but I don't think it has been committed yet (and
I'm sure it is not on F17 DVD).
https://www.redhat.com/archives/anaconda-devel-list/2012-June/msg00115.html
You can workaround this issue by making sure your *first* network
device will get an IP address from DHCP (or manually setting it up).
Well, as written just a minute ago, it's first ethernet connected to a
DHCP-featured network, and it works flawlessly for F16.
[]'s Gustavo
Cheers,
Timo
On 07/02/2012 04:46 AM, Timo Schoeler wrote:
> Hi,
>
> I just double verified following issue:
>
> * Installing Fedora 16 ppc64 on my Power 285 (connected via serial,
> then booting 'linux vnc') using VNC runs smoothly
>
> * Trying the same using Fedora 17 ISO fails
>
> It seems as if the Network Manager fails on Fedora 17 and causes
> anaconda's vncS.startServer() to bark.
>
> Is that a known issue? Should I file a bug record for this?
>
> Cheers,
>
> Timo
>
> ---
>
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM STARTING SOFTWARE IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM PLEASE WAIT... IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM | Elapsed time
> since release of system processors: 2 mins 41 secs
>
> Config file read, 246 bytes
>
>
> Welcome to the 64-bit Fedora 17 installer! Hit <TAB> for boot
> options.
>
>
> Welcome to yaboot version 1.3.17 (Red Hat 1.3.17-2.fc16) Enter
> "help" to get some basic usage information boot: linux vnc Please
> wait, loading kernel... Elf64 kernel loaded... Loading ramdisk...
> ramdisk loaded at 03300000, size: 23133 Kbytes OF stdout device is:
> /vdevice/vty@30000000 Preparing to boot Linux version
> 3.3.4-5.fc17.ppc64 (mockbuild(a)ppc-builder2.qa.fedoraproject.org)
> (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon
> May 14 10:18:37 MST 2012 Detected machine type: 0000000000000101
> Max number of cores passed to firmware: 512 (NR_CPUS = 1024)
> Calling ibm,client-architecture-support... not implemented command
> line: ro root=live:CDLABEL=Fedora_17_ppc64 vnc memory layout at
> init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom
> : 00000000049a0000 alloc_top : 0000000008000000 alloc_top_hi :
> 00000000f5000000 rmo_top : 0000000008000000 ram_top :
> 00000000f5000000 found display : /pci@800000020000002/display@1,
> opening... done instantiating rtas at 0x00000000075a0000... done
> Querying for OPAL presence... not there. boot cpu hw idx 0 copying
> OF device tree... Building dt strings... Building dt structure...
> Device tree strings 0x0000000004ab0000 -> 0x0000000004ab137c Device
> tree struct 0x0000000004ac0000 -> 0x0000000004ae0000 [ 0.000000]
> Phyp-dump not supported on this hardware [ 0.000000] Using pSeries
> machine description [ 0.000000] Using 1TB segments [ 0.000000]
> Found initrd at 0xc000000003300000:0xc0000000049975ac [ 0.000000]
> bootconsole [udbg0] enabled [ 0.000000] Partition configured for 2
> cpus. [ 0.000000] CPU maps initialized for 2 threads per core [
> 0.000000] Starting Linux PPC64 #1 SMP Mon May 14 10:18:37 MST 2012
> [ 0.000000] ----------------------------------------------------- [
> 0.000000] ppc64_pft_size = 0x1a [ 0.000000] physicalMemorySize =
> 0xf5000000 [ 0.000000] htab_hash_mask = 0x7ffff [ 0.000000]
> ----------------------------------------------------- [ 0.000000]
> Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup
> subsys cpu [ 0.000000] Linux version 3.3.4-5.fc17.ppc64
> (mockbuild(a)ppc-builder2.qa.fedoraproject.org) (gcc version 4.7.0
> 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 14 10:18:37 MST
> 2012 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] PCI host bridge
> /pci@800000020000002 ranges: [ 0.000000] IO
> 0x000003fe00200000..0x000003fe002fffff -> 0x0000000000000000 [
> 0.000000] MEM 0x0000040040000000..0x000004007fffffff ->
> 0x00000000c0000000 [ 0.000000] PCI host bridge /pci@800000020000003
> ranges: [ 0.000000] IO 0x000003fe00300000..0x000003fe003fffff ->
> 0x0000000000000000 [ 0.000000] MEM
> 0x0000040080000000..0x00000400bfffffff -> 0x00000000c0000000 [
> 0.000000] PCI host bridge /pci@800000020000004 ranges: [ 0.000000]
> IO 0x000003fe00400000..0x000003fe004fffff -> 0x0000000000000000 [
> 0.000000] MEM 0x00000400c0000000..0x00000400ffffffff ->
> 0x00000000c0000000 [ 0.000000] EEH: PCI Enhanced I/O Error Handling
> Enabled [ 0.000000] PPC64 nvram contains 7168 bytes [ 0.000000]
> Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x0000f500 [
> 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each
> node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000
> -> 0x0000f500 [ 0.000000] [boot]0015 Setup Done [ 0.000000] PERCPU:
> Embedded 2 pages/cpu @c000000001700000 s84608 r0 d46464 u524288 [
> 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 62666 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel
> command line: ro root=live:CDLABEL=Fedora_17_ppc64 vnc [ 0.000000]
> PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000]
> freeing bootmem node 0 [ 0.000000] Memory: 3940480k/4014080k
> available (17920k kernel code, 73600k reserved, 1856k data, 2952k
> bss, 6656k init) [ 0.000000] SLUB: Genslabs=19, HWalign=128,
> Order=0-3, MinObjects=0, CPUs=2, Nodes=256 [ 0.000000] Hierarchical
> RCU implementation. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [
> 0.000000] clocksource: timebase mult[21b5307] shift[23] registered
> [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console
> [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0]
> enabled, bootconsole disabled [ 0.000000] allocated 1003520 bytes
> of page_cgroup [ 0.000000] please try 'cgroup_disable=memory'
> option if you don't want memory cgroups [ 0.003477] pid_max:
> default: 32768 minimum: 301 [ 0.003542] Security Framework
> initialized [ 0.003556] SELinux: Initializing. [ 0.003790] Dentry
> cache hash table entries: 524288 (order: 6, 4194304 bytes) [
> 0.005169] Inode-cache hash table entries: 262144 (order: 5,
> 2097152 bytes) [ 0.005774] Mount-cache hash table entries: 4096 [
> 0.013400] Initializing cgroup subsys cpuacct [ 0.013410]
> Initializing cgroup subsys memory [ 0.013517] Initializing cgroup
> subsys devices [ 0.013524] Initializing cgroup subsys freezer [
> 0.013531] Initializing cgroup subsys net_cls [ 0.013538]
> Initializing cgroup subsys blkio [ 0.053937] Initializing cgroup
> subsys perf_event [ 0.053987] ftrace: allocating 21118 entries in 8
> pages [ 0.068079] POWER5+/++ performance monitor hardware support
> registered [ 0.068600] Brought up 2 CPUs [ 0.069634] devtmpfs:
> initialized [ 0.084310] atomic64 test passed [ 0.084400] NET:
> Registered protocol family 16 [ 0.084423] IBM eBus Device Driver [
> 0.087480] PCI: Probing PCI hardware [ 0.087586] PCI host bridge to
> bus 0000:00 [ 0.087596] pci_bus 0000:00: root bus resource [io
> 0x10000-0x10ffff] [ 0.087607] pci_bus 0000:00: root bus resource
> [mem 0x40040000000-0x4007fffffff] [ 0.090599] IOMMU table
> initialized, virtual merging enabled [ 0.106095] PCI host bridge to
> bus 0001:00 [ 0.106104] pci_bus 0001:00: root bus resource [io
> 0x120000-0x21ffff] [ 0.106114] pci_bus 0001:00: root bus resource
> [mem 0x40080000000-0x400bfffffff] [ 0.124208] PCI host bridge to
> bus 0002:00 [ 0.124219] pci_bus 0002:00: root bus resource [io
> 0x230000-0x32ffff] [ 0.124229] pci_bus 0002:00: root bus resource
> [mem 0x400c0000000-0x400ffffffff] [ 0.152049] opal: Node not found
> [ 0.153811] bio: create slab <bio-0> at 0 [ 0.154089] vgaarb:
> device added: PCI:0000:00:01.0,decodes=io+mem,owns=mem,locks=none [
> 0.154120] vgaarb: loaded [ 0.154125] vgaarb: bridge control
> possible 0000:00:01.0 [ 0.154241] SCSI subsystem initialized [
> 0.218546] usbcore: registered new interface driver usbfs [
> 0.218571] usbcore: registered new interface driver hub [ 0.218626]
> usbcore: registered new device driver usb [ 0.218911] NetLabel:
> Initializing [ 0.218918] NetLabel: domain hash size = 128 [
> 0.218925] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218949]
> NetLabel: unlabeled traffic allowed by default [ 0.219047]
> Switching to clocksource timebase [ 0.238925] NET: Registered
> protocol family 2 [ 0.238990] IP route cache hash table entries:
> 32768 (order: 2, 262144 bytes) [ 0.239201] TCP established hash
> table entries: 131072 (order: 5, 2097152 bytes) [ 0.239765] TCP
> bind hash table entries: 65536 (order: 4, 1048576 bytes) [
> 0.284065] TCP: Hash tables configured (established 131072 bind
> 65536) [ 0.284075] TCP reno registered [ 0.284087] UDP hash table
> entries: 2048 (order: 0, 65536 bytes) [ 0.284121] UDP-Lite hash
> table entries: 2048 (order: 0, 65536 bytes) [ 0.284233] NET:
> Registered protocol family 1 [ 0.400022] Unpacking initramfs... [
> 6.104168] Freeing initrd memory: 23168k freed [ 6.105660] vio
> 30000000: Warning: IOMMU dma not supported: mask
> 0xffffffffffffffff, table unavailable [ 6.105732] vio 30000001:
> Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable [ 6.105776] vio 4000: Warning: IOMMU dma not supported:
> mask 0xffffffffffffffff, table unavailable [ 6.105817] vio 4001:
> Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable [ 6.105858] vio 4002: Warning: IOMMU dma not supported:
> mask 0xffffffffffffffff, table unavailable [ 6.105898] vio 4003:
> Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable [ 6.106364] audit: initializing netlink socket
> (disabled) [ 6.106389] type=2000 audit(1340956324.059:1):
> initialized [ 6.295130] HugeTLB registered 16 MB page size,
> pre-allocated 0 pages [ 6.295144] HugeTLB registered 16 GB page
> size, pre-allocated 0 pages [ 6.299225] VFS: Disk quotas
> dquot_6.5.2 [ 6.299340] Dquot-cache hash table entries: 8192 (order
> 0, 65536 bytes) [ 6.300219] msgmni has been set to 7740 [ 6.300928]
> alg: No test for stdrng (krng) [ 6.300946] NET: Registered protocol
> family 38 [ 6.301031] Block layer SCSI generic (bsg) driver version
> 0.4 loaded (major 253) [ 6.301079] io scheduler noop registered [
> 6.301087] io scheduler deadline registered [ 6.301199] io scheduler
> cfq registered (default) [ 6.301361] pci_hotplug: PCI Hot Plug PCI
> Core version: 0.5 [ 6.301538] Using unsupported 1024x768 display at
> 4007e000000, depth=8, pitch=1024 [ 6.312070] Console: switching to
> colour frame buffer device 128x48 [ 6.325888] fb0: Open Firmware
> frame buffer device on /pci@800000020000002/display@1 [ 6.326491]
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.328118]
> Linux agpgart interface v0.103 [ 6.329614] loop: module loaded [
> 6.329688] Uniform Multi-Platform E-IDE driver [ 6.329748] ide-gd
> driver 1.18 [ 6.329965] Fixed MDIO Bus: probed [ 6.330054]
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [
> 6.330377] ehci_hcd 0002:cc:01.2: EHCI Host Controller [ 6.330482]
> ehci_hcd 0002:cc:01.2: new USB bus registered, assigned bus number
> 1 [ 6.359167] ehci_hcd 0002:cc:01.2: irq 276, io mem 0x400f8002000
> [ 6.379080] ehci_hcd 0002:cc:01.2: USB 2.0 started, EHCI 1.00 [
> 6.379123] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002 [ 6.379134] usb usb1: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1 [ 6.379144] usb usb1: Product: EHCI Host
> Controller [ 6.379152] usb usb1: Manufacturer: Linux
> 3.3.4-5.fc17.ppc64 ehci_hcd [ 6.379162] usb usb1: SerialNumber:
> 0002:cc:01.2 [ 6.379360] hub 1-0:1.0: USB hub found [ 6.379371] hub
> 1-0:1.0: 5 ports detected [ 6.379544] ohci_hcd: USB 1.1 'Open' Host
> Controller (OHCI) Driver [ 6.379863] ohci_hcd 0002:cc:01.0: OHCI
> Host Controller [ 6.379950] ohci_hcd 0002:cc:01.0: new USB bus
> registered, assigned bus number 2 [ 6.379992] ohci_hcd
> 0002:cc:01.0: irq 276, io mem 0x400f8001000 [ 6.469078] usb usb2:
> New USB device found, idVendor=1d6b, idProduct=0001 [ 6.469090] usb
> usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [
> 6.469100] usb usb2: Product: OHCI Host Controller [ 6.469108] usb
> usb2: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ohci_hcd [ 6.469117]
> usb usb2: SerialNumber: 0002:cc:01.0 [ 6.469293] hub 2-0:1.0: USB
> hub found [ 6.469307] hub 2-0:1.0: 3 ports detected [ 6.469707]
> ohci_hcd 0002:cc:01.1: OHCI Host Controller [ 6.469789] ohci_hcd
> 0002:cc:01.1: new USB bus registered, assigned bus number 3 [
> 6.469826] ohci_hcd 0002:cc:01.1: irq 276, io mem 0x400f8000000 [
> 6.559067] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0001 [ 6.559089] usb usb3: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1 [ 6.559099] usb usb3: Product: OHCI Host
> Controller [ 6.559107] usb usb3: Manufacturer: Linux
> 3.3.4-5.fc17.ppc64 ohci_hcd [ 6.559117] usb usb3: SerialNumber:
> 0002:cc:01.1 [ 6.559313] hub 3-0:1.0: USB hub found [ 6.559326] hub
> 3-0:1.0: 2 ports detected [ 6.559444] uhci_hcd: USB Universal Host
> Controller Interface driver [ 6.559548] usbcore: registered new
> interface driver usbserial [ 6.559568] USB Serial support
> registered for generic [ 6.559593] usbcore: registered new
> interface driver usbserial_generic [ 6.559603] usbserial: USB
> Serial Driver core [ 6.559864] mousedev: PS/2 mouse device common
> for all mice [ 6.560101] rtc-generic rtc-generic: rtc core:
> registered rtc-generic as rtc0 [ 6.560241] device-mapper: uevent:
> version 1.0.3 [ 6.560375] device-mapper: ioctl: 4.22.0-ioctl
> (2011-10-19) initialised: dm-devel(a)redhat.com [ 6.560678] usbcore:
> registered new interface driver usbhid [ 6.560686] usbhid: USB HID
> core driver [ 6.560770] ip_tables: (C) 2000-2006 Netfilter Core
> Team [ 6.560799] TCP cubic registered [ 6.560805] Initializing XFRM
> netlink socket [ 6.561028] NET: Registered protocol family 10 [
> 6.561241] Mobile IPv6 [ 6.561249] NET: Registered protocol family
> 17 [ 6.561261] Registering the dns_resolver key type [ 6.564367]
> registered taskstats version 1 [ 6.569260] rtc-generic rtc-generic:
> setting system clock to 2012-06-29 07:52:05 UTC (1340956325) [
> 6.569285] Initializing network drop monitor service [ 6.570795]
> Freeing unused kernel memory: 6656k freed [ 6.887560] dracut:
> dracut-018-35.git20120510.fc17 [ 6.946010] squashfs: version 4.0
> (2009/01/31) Phillip Lougher [ 6.949762] Loading iSCSI transport
> class v2.0-870. [ 6.951969] iscsi: registered transport (tcp) [
> 6.954629] alua: device handler registered [ 6.957406] emc: device
> handler registered [ 6.960033] hp_sw: device handler registered [
> 6.962729] rdac: device handler registered ERROR: could not insert
> 'floppy': No such device FATAL: Module edd not found. FATAL: Module
> iscsi_ibft not found. [ 7.006626] md: raid0 personality registered
> for level 0 [ 7.009711] md: raid1 personality registered for level
> 1 [ 7.012442] async_tx: api initialized (async) [ 7.012691] xor:
> measuring software checksum speed [ 7.059078] 8regs : 4812.800
> MB/sec [ 7.109084] 8regs_prefetch: 5420.800 MB/sec [ 7.159080]
> 32regs : 4249.600 MB/sec [ 7.209091] 32regs_prefetch: 5164.800
> MB/sec [ 7.209099] xor: using function: 8regs_prefetch (5420.800
> MB/sec) [ 7.369084] usb 3-1: new low-speed USB device number 2
> using ohci_hcd [ 7.379115] raid6: int64x1 1441 MB/s [ 7.549092]
> raid6: int64x2 2582 MB/s [ 7.594093] usb 3-1: New USB device found,
> idVendor=046a, idProduct=0011 [ 7.594107] usb 3-1: New USB device
> strings: Mfr=0, Product=0, SerialNumber=0 [ 7.611428] input: HID
> 046a:0011 as
> /devices/pci0002:00/0002:00:02.3/0002:cc:01.1/usb3/3-1/3-1:1.0/input/input0
>
>
> [ 7.611584] generic-usb 0003:046A:0011.0001: input,hidraw0: USB
> HID v1.11 Keyboard [HID 046a:0011] on usb-0002:cc:01.1-1/input0 [
> 7.719076] raid6: int64x4 2479 MB/s [ 7.889105] raid6: int64x8 1366
> MB/s [ 7.889113] raid6: using algorithm int64x2 (2582 MB/s) [
> 7.891180] md: raid6 personality registered for level 6 [ 7.891190]
> md: raid5 personality registered for level 5 [ 7.891199] md: raid4
> personality registered for level 4 [ 7.899155] md: raid10
> personality registered for level 10 [ 7.901771] md: linear
> personality registered for level -1 [ 7.914146] device-mapper:
> multipath: version 1.3.0 loaded [ 7.916774] device-mapper:
> multipath round-robin: version 1.0.0 loaded Loading Fedora 17 ppc64
> installer... [ 8.050404] dracut: livenet: no url handler for
> CDLABEL=Fedora_17_ppc64 [ 8.054525] dracut: rd.luks=0: removing
> cryptoluks activation [ 8.066573] dracut: root was
> live:CDLABEL=Fedora_17_ppc64, is now
> live:/dev/disk/by-label/Fedora_17_ppc64 [ 8.072219] dracut:
> rd.lvm=0: removing LVM activation [ 8.140684] RPC: Registered named
> UNIX socket transport module. [ 8.140698] RPC: Registered udp
> transport module. [ 8.140706] RPC: Registered tcp transport
> module. [ 8.140714] RPC: Registered tcp NFSv4.1 backchannel
> transport module. [ 8.256825] udevd[223]: starting version 182 [
> 8.274484] dracut: rd.dm=0: removing DM RAID activation [ 8.289771]
> dracut: rd.md=0: removing MD RAID activation [ 8.425273]
> pata_pdc2027x 0001:cc:01.0: enabling device (0002 -> 0003) [
> 8.427299] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2
> (April 27, 2011) [ 8.427448] ipr 0001:d0:01.0: Found IOA with IRQ:
> 325 [ 8.445311] e1000: Intel(R) PRO/1000 Network Driver - version
> 7.3.21-k8-NAPI [ 8.445324] e1000: Copyright (c) 1999-2006 Intel
> Corporation. [ 8.445494] e1000 0002:d0:01.0: enabling device (0000
> -> 0002) [ 8.525303] pata_pdc2027x 0001:cc:01.0: PLL input clock
> 32754 kHz [ 8.556329] scsi1 : pata_pdc2027x [ 8.611225] ipr
> 0001:d0:01.0: Starting IOA initialization sequence. [ 8.614090]
> scsi2 : pata_pdc2027x [ 8.614195] ata1: PATA max UDMA/133 mmio
> m16384@0x400b8000000 cmd 0x400b80017c0 irq 324 [ 8.614208] ata2:
> PATA max UDMA/133 mmio m16384@0x400b8000000 cmd 0x400b80015c0 irq
> 324 [ 8.616166] ipr 0001:d0:01.0: Adapter firmware version:
> 0510006D [ 8.630506] ipr 0001:d0:01.0: IOA initialized. [ 8.630532]
> scsi0 : IBM 573E Storage Adapter [ 8.650156] scsi 0:0:5:0:
> Direct-Access IBM H0 HUS103073FL3800 RPQR PQ: 0 ANSI: 4 [ 8.657731]
> scsi 0:0:15:0: Enclosure IBM VSBPD4E1 U4SCSI 6000 PQ: 0 ANSI: 2 [
> 8.789678] ata1.00: ATAPI: IBM DROM00205L1 H0, P533, max UDMA/66 [
> 8.794326] e1000 0002:d0:01.0: eth0: (PCI-X:133MHz:64-bit)
> 00:14:5e:96:4b:18 [ 8.794343] e1000 0002:d0:01.0: eth0: Intel(R)
> PRO/1000 Network Connection [ 8.794520] e1000 0002:d0:01.1:
> enabling device (0000 -> 0002) [ 8.830542] ata1.00: configured for
> UDMA/66 [ 8.830887] scsi: waiting for bus probes to complete ... [
> 9.106307] sd 0:0:5:0: Attached scsi generic sg0 type 0 [ 9.106662]
> scsi 0:0:15:0: Attached scsi generic sg1 type 13 [ 9.108220] sd
> 0:0:5:0: [sda] 143374000 512-byte logical blocks: (73.4 GB/68.3
> GiB) [ 9.109441] scsi 1:0:0:0: CD-ROM IBM DROM00205L1 H0 P533 PQ: 0
> ANSI: 2 [ 9.110600] sr0: scsi3-mmc drive: 61x/61x cd/rw xa/form2
> cdda tray [ 9.110611] cdrom: Uniform CD-ROM driver Revision: 3.20 [
> 9.111136] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 9.129980]
> sd 0:0:5:0: [sda] Write Protect is off [ 9.140895] e1000
> 0002:d0:01.1: eth1: (PCI-X:133MHz:64-bit) 00:14:5e:96:4b:19 [
> 9.140911] e1000 0002:d0:01.1: eth1: Intel(R) PRO/1000 Network
> Connection [ 9.143023] sd 0:0:5:0: [sda] Write cache: disabled,
> read cache: enabled, supports DPO and FUA [ 9.183974] sda: sda1
> sda2 sda3 [ 9.211915] sd 0:0:5:0: [sda] Attached SCSI disk [
> 9.280923] scsi: unknown device type 31 [ 9.280937] scsi
> 0:255:255:255: No Device IBM 573E001 0150 PQ: 0 ANSI: 0 [ 9.282952]
> scsi 0:255:255:255: Attached scsi generic sg3 type 31 [ 10.948577]
> EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
> (null) [ 11.356800] dracut: Mounted root filesystem
> /dev/mapper/live-rw rpcbind: rpcbind terminating on signal. Restart
> with "rpcbind -w" [ 12.390384] dracut: Switching root [ 14.663148]
> SELinux: Permission ptrace_child in class process not defined in
> policy. [ 14.663409] SELinux: the above unknown classes and
> permissions will be allowed [ 14.852679] type=1403
> audit(1340956333.769:2): policy loaded auid=4294967295
> ses=4294967295
>
> Welcome to Linux!
>
> Started Lock Directory [ OK ] Starting File System Check on Root
> Device... Starting Remount API VFS... Starting Media Directory...
> Started Runtime Directory [ OK ] Starting Monitoring of LVM2
> mirrors, snapshots etc. using d...ogress polling... Starting
> Software RAID Monitor Takeover... Starting Apply Kernel
> Variables... Started Load Kernel Modules [ OK ] Started Set Up
> Additional Binary Formats [ OK ] Starting POSIX Message Queue File
> System... Started FUSE Control File System [ OK ] Starting Security
> File System... Starting Debug File System... Starting Journal
> Service... Started Journal Service [ OK ] Starting Huge Pages File
> System... Starting Configuration File System... Starting udev
> Coldplug all Devices... Starting udev Kernel Device Manager...
> Starting Setup Virtual Console... Started udev Kernel Device
> Manager [ OK ] Started File System Check on Root Device [ OK ]
> Failed to start Remount API VFS [FAILED] See 'systemctl status
> systemd-remount-api-vfs.service' for details. Started Media
> Directory [ OK ] Started Monitoring of LVM2 mirrors, snapshots etc.
> u...rogress polling [ OK ] Started Software RAID Monitor Takeover
> [ OK ] Started Apply Kernel Variables [ OK ] Started POSIX Message
> Queue File System [ OK ] Started Security File System [ OK ]
> Started Debug File System [ OK ] Started Huge Pages File System [
> OK ] Started Configuration File System [ OK ] Started Setup Virtual
> Console [ OK ] Started udev Coldplug all Devices [ OK ] Starting
> udev Wait for Complete Device Initialization... Starting Remount
> Root FS... Started Remount Root FS [ OK ] Started Import network
> configuration from initramfs [ OK ] Starting Tell Plymouth To Write
> Out Runtime Data... Starting Load Random Seed... Starting Configure
> read-only root support... Started udev Wait for Complete Device
> Initialization [ OK ] Started Tell Plymouth To Write Out Runtime
> Data [ OK ] Started Load Random Seed [ OK ] Started Configure
> read-only root support [ OK ] Starting Recreate Volatile Files and
> Directories... Starting Show Plymouth Boot Screen... Failed to
> start Show Plymouth Boot Screen [FAILED] See 'systemctl status
> plymouth-start.service' for details. Started Recreate Volatile
> Files and Directories [ OK ] Started anaconda performance monitor
> [ OK ] Starting System Logging Service... Starting Network
> Manager... Starting Terminate Plymouth Boot Screen... Starting Wait
> for Plymouth Boot Screen to Quit... Started Terminate Plymouth Boot
> Screen [ OK ] Started Wait for Plymouth Boot Screen to Quit [ OK ]
> Starting Shell on tty2... Started Shell on tty2 [ OK ] Starting
> Shell on hvc1... Started Shell on hvc1 [ OK ] Starting D-Bus System
> Message Bus... Stopped systemd-kmsg-syslogd.service [ OK ] Started
> System Logging Service [ OK ] Started D-Bus System Message Bus [ OK
> ] Started Network Manager [ OK ]
>
> 07:52:41 Starting VNC... Traceback (most recent call last): File
> "/usr/sbin/anaconda", line 804, in <module> setupDisplay(anaconda,
> opts) File "/usr/sbin/anaconda", line 587, in setupDisplay
> runVNC(vncS) File "/usr/sbin/anaconda", line 331, in runVNC
> vncS.startServer() File
> "/usr/lib64/python2.7/site-packages/pyanaconda/vnc.py", line 190,
> in startServer self.initialize() File
> "/usr/lib64/python2.7/site-packages/pyanaconda/vnc.py", line 113,
> in initialize if self.ip.find(':') != -1: AttributeError:
> 'NoneType' object has no attribute 'find' EPOW <0x64400400000006c
> 0x0 0x0>