Hi Jonathan,
My cobbler report does not have a MTU displayed. So perhaps I am running
an older version.
Which version are you running there?
Ashley
On Fri, 2010-12-03 at 01:32 +1000, Jonathan Sabo wrote:
On Thu, Dec 2, 2010 at 4:12 AM, Dylan Swift
<dylan.swift(a)gmail.com> wrote:
> Hi Ashley,
> I never managed to get this working either - I ended up adding a %post line
> in the kickstart file:
> echo "MTU=9000" >> /etc/sysconfig/network-scripts/ifcfg-eth1
>
> If you do get this working (ie it is supported) then I would love to know
> how you got it to work.
> HTH
> Dylan
> On 2 December 2010 02:19, Jonathan Sabo <jsabo(a)criminal.org> wrote:
>>
>> On Wed, Dec 1, 2010 at 8:54 PM, Ashley Wright <a2.wright(a)qut.edu.au>
>> wrote:
>> > Hi,
>> >
>> > Just wondering if cobbler has support for setting the MTU of a network
>> > interface?
>> >
>> > I have tried using '--mtu=9000', however I get the error
"cobbler:
>> > error: no such option: --mtu"
>> >
>> > I am running cobbler 2.0.3.1 from Fedora 12.
>> >
>> > I remember seeing some emails about a patch back in May, but I have not
>> > found any information on if this patch was integrated.
>> >
>> > Regards,
>> > Ashley
>> >
>> > --
>> > Ashley Wright
>> > HPC and Research Support Group
>> > Queensland University of Technology (QUT)
>> >
>> > Ph: (07) 3138 1813
>> > Mobile: (04) 0531 3124
>> > QUT: #66866
>> > Email: a2.wright(a)qut.edu.au
>> > Postal:
>> > HPC and Research Support Group,
>> > Block V, Level 7, Room V718,
>> > Gardens Point Campus,
>> > Queensland University of Technology,
>> > GPO Box 2434,
>> > Brisbane Qld 4001
>> >
>> > _______________________________________________
>> > cobbler mailing list
>> > cobbler(a)lists.fedorahosted.org
>> >
https://fedorahosted.org/mailman/listinfo/cobbler
>> >
>>
>> ipv4 and ipv6 mtu should be included in Cobbler 2.1.
>> _______________________________________________
>> cobbler mailing list
>> cobbler(a)lists.fedorahosted.org
>>
https://fedorahosted.org/mailman/listinfo/cobbler
>
>
> _______________________________________________
> cobbler mailing list
> cobbler(a)lists.fedorahosted.org
>
https://fedorahosted.org/mailman/listinfo/cobbler
>
>
When you do cobbler system report --name whatevername do you see:
Interface ===== : eth1
Bonding Mode :
Bonding Master :
Bonding Opts :
DHCP Tag :
DNS Name : myhost
IP Address : 192.168.69.23
IPv6 Address :
IPv6 Default Gateway :
IPv6 MTU :
IPv6 Secondaries : []
IPv6 Static Routes : []
MAC Address : 03:0e:19:3b:94:0c
MTU :
Static : True
Static Routes : []
Subnet : 255.255.255.0
Virt Bridge :
If so all you have to do is cobbler system edit --name whatever --mtu
9000. That should work. If it doesn't please let me know and I'll
try and figure out why but "It works from my chair".
If not then you have to upgrade to a version of cobbler that has the
patches included.
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/cobbler --
Ashley Wright
HPC and Research Support Group
Queensland University of Technology (QUT)
Ph: (07) 3138 1813
Mobile: (04) 0531 3124
QUT: #66866
Email: a2.wright(a)qut.edu.au
Postal:
HPC and Research Support Group,
Block V, Level 7, Room V718,
Gardens Point Campus,
Queensland University of Technology,
GPO Box 2434,
Brisbane Qld 4001