Hi
This is more of a boot/load driver issue? Sounds like you need to steal an initrd image
that already has the kernel mod installed, boot off that and then pass a kernal arg to
force loading of it? BTW isn't all this HP raid stuff hidden underneath and the cciss
driver just sees it as a disk? I have worked with a lot of HP servers and there isn't
anything special other than setting up the underlying raid volume in advance of os
install?
--
Alastair Munro
-----Original Message-----
From: "Sethuraman, Murali" <Murali.Sethuraman(a)capitalone.com>
To: Alan Evangelista <alanoe(a)linux.vnet.ibm.com>,
"cobbler(a)lists.fedorahosted.org" <cobbler(a)lists.fedorahosted.org>,
"Uma
Harini (umaharini(a)gmail.com)" <umaharini(a)gmail.com>
Sent: Sun, 17 May 2015 21:00
Subject: Re: [cobbler] Ilo baremetal
Hi Alan/Cobbler buddies,
I have a situation, where in I need to inject a specific "hpvsa" RAID driver in
the cobbler ks. I tried the below, but does not work. Appreciate if you can let me know
how to do this correctly and make it work.
Use case:
- HP physical blade with B210i RAID controller, that needs the hpvsa driver loaded prior
to kickstart
- Need to load RHEL7 on this server with the RAID controller on it
What had been tried so far:
- I had tried to do add "driverdisk --source=http://...../", and have the
hpvsa.iso/img file hosted on the http link, but would not work [RHEL7 OS load completes,
and at the post-install step errors out "bootloader install failed"].
- The bootloader statement in ks is - bootloader --location=mbr --driveorder=sda
--append="crashkernel=auto notsc rdblacklist=ahci rdloaddriver=hpvsa,hpsa"
- I tried to add the hpvsa rpm package to my RHEL7 repository [imported via cobbler
import], by copying the package, and adding the statement "kmod-hpvsa" to the
%packages section in ks. While loading the packages, kmod-hpvsa package not found is
displayed
- I also tried to copy the rpm kmod-hpvsa and the repodata associated with it, to my RHEL7
repository, still the same error "kmod-hpvsa package not found"
Please let me know.
Thanks
Murali K Sethuraman
Lead Platform Engineer, Tech Ops
Murali.Sethuraman(a)CapitalOne.com
Phone: 804-284-4423 Tie: 433
Cell: 804-814-1187
Visit OMS @
https://pulse.kdc.capitalone.com/groups/oms
Quote of the week: Certain is Uncertain, Uncertain is Certain….
-----Original Message-----
From: Alan Evangelista [mailto:alanoe@linux.vnet.ibm.com]
Sent: Thursday, May 07, 2015 1:44 AM
To: Sethuraman, Murali; cobbler(a)lists.fedorahosted.org; Uma Harini (umaharini(a)gmail.com)
Subject: Re: [cobbler] Ilo baremetal
On 03/17/2015 12:43 PM, Sethuraman, Murali wrote:
I had tried with the latest fence agents too, and the same results
were seen. I had raised a bug with redhat on this
https://bugzilla.redhat.com/show_bug.cgi?id=1200998 and waiting on
updates after the initial exchange of logs and information. It seems
to be pointing to “ipmiutil”.
Providing feedback to the Cobbler mailing list...
Murali posted on the bug that iLo fence agents work fine, this was simply a firewall
issue.
Regards,
Alan Evangelista
________________________________________________________
The information contained in this e-mail is confidential and/or proprietary to Capital One
and/or its affiliates. The information transmitted herewith is intended only for use by
the individual or entity to which it is addressed. If the reader of this message is not
the intended recipient, you are hereby notified that any review, retransmission,
dissemination, distribution, copying or other use of, or taking of any action in reliance
upon this information is strictly prohibited. If you have received this communication in
error, please contact the sender and delete the material from your computer.
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler