William,
Sorry I am late to respond.. and I also further apologize as I seem to have
misread your request.. I missed the part about koan, unfortunately I've
never used koan to provision in my setup, I like you had too many issues
getting it working right. Instead I used scripts that acted directly with
ESXI CLI, kvm (virt-install), etc. to boot new virtual machines, which
would then install the default profile via pxe boot, self register with
cobbler and then reinstall to the appropriate OS/settings (based on
settings within the default profile, and or script, which I changed
depending on the install.)
I looked through my files, and I have some of my scripts, but I don't have
any of the cobbler settings themselves.
If possible could you provide the output for any errors that you are
getting? I could help you take a look (it would also be nice to finally get
around to learning koan... :) ).
Respectfully,
Scott
(((FYI, (although it's not related to your issue) I am also attempting to
build a potential upgrade to cobbler that will hopefully allow
OS/Configuration for rack-scale installations based on switch/switchport of
the installed server,)))
*******************************************************
Scott Mattan 【マッタン・スコット】
NISCOM Inc.
Software Service Solution Department
Tel:03-6681-4305 / Mobile:080-4223-2306
*******************************************************
On Tue, Apr 4, 2017 at 9:24 PM, William Muriithi <william.muriithi(a)gmail.com
wrote:
Hi Scott,
> I haven’t used cobbler with ESXI in a while, so I don’t exactly remember
> what the parameters were... but I know that you need to have a couple of
> kernel options set in your profile. I had my setup completely automated,
> but it got erased when my section got reorganized. Ideally you should be
> able to press the power-button and have your OS installed, updated, and
> setup for you. Admittedly, what I mostly worked with was kvm or
bare-metal,
> but I had some ESXI servers in the loop as well.
Thanks for that info. It mean its well supported on ESXI, I just have
to figure out how to do it
>
> Let me see if I have any notes from left over from that project. In the
> meantime if anyone else knows the answer off the top of their head please
> let us know.
> I am at work right now, so it might be ~7 hours or so before I can get
back
> to you, but since we are likely in different time-zones, I'm sure that
isn't
> a problem.
>
No problem Scott, take your time. I really appreciate your effort and
look forward to your notes.
I am curious, where one should run the command below, it looks like on
the ESXI, reading between lines, but none of the articles online
highlight that explicitly.
koan --virt --server=cobbler.eng.example.com --profile=rhel7.3-x86_64
--virt-type=vmware --virt-name=lithium.eng.example.com
If its on ESXi, how do you install koan to virtual machine thats don't
have a operating system yet? I have a system with the virtual machine
already setup on cobbler side as follows:
cobbler system add --name=lithium --hostname=lithium.eng.example.com
--gateway=192.168.20.168 --profile=rhel7.3-x86_64
--dns-name=lithium.eng.example.com --mac=00:50:56:9e:fe:1a
--ip-address=192.168.20.3 --subnet=255.255.255.0 --status=production
--interface=em1 --static=1
Regards,
William
_______________________________________________
cobbler mailing list -- cobbler(a)lists.fedorahosted.org
To unsubscribe send an email to cobbler-leave(a)lists.fedorahosted.org