Web page doesn't display (Trouble with javascript?)
by Jonathan Ryshpan
Can anyone display this page:
https://eclipse.gsfc.nasa.gov/SEgoogle/SEgoogle2001/SE2024Apr08Tgoogle.html
The text claims the page contains a map of the April 2024 eclipse, but
no such thing appears on the screen.
System Info:
Firefox 119.0 (64-bit)
Operating System: Fedora Linux 38
KDE Plasma Version: 5.27.8
KDE Frameworks Version: 5.110.0
Qt Version: 5.15.10
Kernel Version: 6.5.9-200.fc38.x86_64 (64-bit)
Graphics Platform: X11
Processors: 8 × Intel® Core™ i7-4790K CPU @ 4.00GHz
Memory: 15.5 GiB of RAM
Graphics Processor: Mesa Intel® HD Graphics 4600
Manufacturer: ASUS
--
Sincerely Jonathan Ryshpan <jonrysh(a)pacbell.net>
I've learned that you can tell a lot about
a person by the way they handle these three
things:
a rainy day,
lost luggage,
and tangled Christmas tree lights.
--Maya Angelou
6 months
thunderbird: duplicated messages downloaded
by fedora@eyal.emu.id.au
[resend from correct email]
F38, tb 115.3.2 (64-bit)
The server is configured as pop3 with the option to leave the messages on the server.
After clicking "Get Messages" I often get no reaction for a while, and click again in a few seconds.
In this case, after the new messages are downloaded, a second download starts and the same messages are fetched again.
Normally, only new messages are downloaded in this situation (so none on a second download), as it should be.
If I download from another client then I will get these messages again, which is OK as each client should know what it already has.
I have one "main" client which downloads messages, removing them from the server.
When away from the main server, I often collect messages using other clients, leaving the messages on the server.
This is when the problem shows.
--
Eyal at Home (fedora(a)eyal.emu.id.au)
6 months
Time to replace SSD disk?
by Javier Perez
Hi.
My boot SSD was purchased on May, 2015.
It is a Crucial 128GB one.
Cockpit is showing me an error of /sys/firmware/efi/efivars 0 free
and smartctl is telling me the following:
==== beginning of SMARTCTL INFO =======
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: Crucial_CT128MX100SSD1
Serial Number: 15030E6E5A80
LU WWN Device Id: 5 00a075 10e6e5a80
Firmware Version: MU01
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 4 17:38:59 2023 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 130) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 3) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always
- 31
5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74107
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 241
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always
- 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always
- 0
173 Ave_Block-Erase_Count 0x0032 097 097 000 Old_age Always
- 108
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always
- 176
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always
- 1036
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always
- 0
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 053 049 000 Old_age Always
- 47 (Min/Max 22/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 16
197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always
- 0
202 Percent_Lifetime_Remain 0x0031 097 097 000 Pre-fail Offline
- 3
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always
- 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always
- 0
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always
- 23588083829
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always
- 738387194
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always
- 172332261
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 8509
-
# 2 Vendor (0xff) Completed without error 00% 8490
-
# 3 Vendor (0xff) Completed without error 00% 8385
-
# 4 Vendor (0xff) Completed without error 00% 8333
-
# 5 Vendor (0xff) Completed without error 00% 8251
-
# 6 Vendor (0xff) Completed without error 00% 8146
-
# 7 Vendor (0xff) Completed without error 00% 8092
-
# 8 Vendor (0xff) Completed without error 00% 7843
-
# 9 Vendor (0xff) Completed without error 00% 7765
-
#10 Vendor (0xff) Completed without error 00% 7721
-
#11 Vendor (0xff) Completed without error 00% 7607
-
#12 Vendor (0xff) Completed without error 00% 7571
-
#13 Vendor (0xff) Completed without error 00% 7535
-
#14 Vendor (0xff) Completed without error 00% 7433
-
#15 Vendor (0xff) Completed without error 00% 7193
-
#16 Vendor (0xff) Completed without error 00% 7156
-
#17 Vendor (0xff) Completed without error 00% 7121
-
#18 Vendor (0xff) Completed without error 00% 7086
-
#19 Vendor (0xff) Completed without error 00% 7050
-
#20 Vendor (0xff) Completed without error 00% 7011
-
#21 Vendor (0xff) Completed without error 00% 6971
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (56994816-57060351)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl
======== END OF SMARTCTL ====
Is it time to say good by and replace this disk? Should I get a larger one?
It has the boot info and operating system.
Thanks for your insights
--
------------------------------
/\_/\
|O O| pepebuho(a)gmail.com
~~~~ Javier Perez
~~~~ While the night runs
~~~~ toward the day...
m m Pepebuho watches
from his high perch.
6 months
Strange lines in message log when running firefox??
by Michael D. Setzer II
Nov 5 09:39:17 xxxxxxxxx /usr/libexec/gdm-x-session[123970]: [Parent 123970, Main Thread]
WARNING: Failed to call GetIdletime(): GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown:
The name is not activatable
Nov 5 09:39:17 xxxxxxxxx /usr/libexec/gdm-x-session[123970]: : 'glib warning', file
/builddir/build/BUILD/firefox-119.0/toolkit/xre/nsSigHandlers.cpp:167
Nov 5 09:39:17 xxxxxxxxx firefox[123970]: Failed to call GetIdletime():
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable
+------------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor (Retired)
mailto:mikes@guam.net
mailto:msetzerii@gmail.com
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+------------------------------------------------------------+
6 months
rpm output
by Patrick Dupre
Hello,
If I make a rpm -qa, I got
xconsole-1.0.7-2.fc34.x86_64
nautilus-sendto-3.8.6-8.fc32.x86_64
--More--error: rpmdbNextIterator: skipping h# 132
Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet:
Failed to parse Signature Packet
because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>.
because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 101000 (28))
Header SHA1 digest: OK
error: rpmdbNextIterator: skipping h# 134
Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet:
Failed to parse Signature Packet
because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>.
because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 1111100 (7c))
Header SHA1 digest: OK
error: rpmdbNextIterator: skipping h# 137
Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet:
Failed to parse Signature Packet
because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>.
because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 10011 (13))
Header SHA1 digest: OK
error: rpmdbNextIterator: skipping h# 138
Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet:
Failed to parse Signature Packet
because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>.
because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 101101 (2d))
Header SHA1 digest: OK
error: rpmdbNextIterator: skipping h# 140
Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet:
Failed to parse Signature Packet
Can I void these errors?
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
===========================================================================
6 months
Duplicated start menu entries
by Paul Smith
Dear All,
I was playing with menulibre and alacarte, and now I have some
duplicated start menu entries.
Could you please help me? I am using XFCE on Fedora 38.
Thanks in advance,
Paul
PS: I posted this on the XFCE mailing list two days ago, but nobody
has answered. That is why I am now using Fedora list.
6 months
way off topic...
by bruce
please.. no flames..
we all know.. the list is FEDORA only... (got it... ) no flames..
(this is a last resort!)
However, doing a test of a digitalocean installation/install of ubuntu
"23.10". The goal is to get a running Apache webserver. In fedora,
trivial!!
In ubuntu, at least with the Digitalocean starting instance, not quite working.
So, I was wondering 1) has anyone here any experience/success with
this process for ubuntu? 2) anyone have any idea/site one can turn to
for "help"/pointers.... I've gone through countless stackoverflow
posts, as well as numerous sites, etc with no success.
Leads me to believe I'm missing something subtle.
Thanks for any/all help!
6 months, 1 week
MongoDB & lots of SELinux denials
by lejeczek
Hi guys.
I’ve just installed vanilla-default MongoDB (following
their official docs) and right away SELinux shows denials:
... SELinux is preventing /usr/bin/mongod from search access
on the directory
/var/lib/containers/storage/overlay-containers/fe6f1040c1373930efe68c777805ecd4c921631e3a87b8806af1fe0cdf266d8b/userdata/shm.
For complete SELinux messages run: sealert -l
5263cddc-183a-472b-9098-bf4599c8453c ...
What is Mongo’s business in checking such path (and there is
more paths)? - I refuse to believe (yet) that my Mongo is
trojaned.
Many thanks, L.
6 months, 1 week
output device changes with pipewire-0.3.83-2
by Frank Elsner
Hello,
has anyone other than me observed the effect that during audio playback to an audio interface the destination device changes to the "build-in audio device." This happens to me occasionally with pipewire-0.3.83-2.fc38.x86_64 and my ZOOM H6 audio interface.
Any hint to avoid this welcome.
Greeting, Frank
6 months, 1 week