ethernet device
by BZ Benny
Hi,
I have two ethernet devices eth0 and eth1. I access to
internet with eth0 and to my private network with
eth1.
I want to make bridging between the two networks so I
use brctl.
#brctl addbr br0
#brctl setfd br0 0
#brctl stp br0 off
#brctl addif br0 eth0
#brctl addif br0 eth1
The problem is if I do not
#ifconfig eth0 0.0.0.0#ifconfig eth0 0.0.0.0
#ifconfig br0 10.160.15.128
#route add default gw 10.160.15.128
I can't access to internet, why does br0 need an IP
adress. I want to not giving him an IP adress and
giving eth0 an IP address of my internet network and
eth1 an IP adress of my private network.
regards
imad.
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
19 years, 3 months
Re: FC2 -DELL 8400 INTEGRATED ETHERNET GIGABIT PROBLEM
by Ahamarshan jn
Thank you for the suggestion, and i shall follow the
rules as advised by u.
Regards
ash
--- Alexander Dalloz <ad+lists(a)uni-x.org> wrote:
> Am Do, den 03.03.2005 schrieb Ahamarshan jn um
> 14:02:
>
> Please don't send HTML formatted mails to this list.
> Thank you.
> And you shouldn't write the subject in caps. This is
> bad style
> (shouting) and even triggers spam detection.
>
> > I have a DELL-8400 Series PC with SATA drive
> and I dual booted it with winxp-prof and FedoraCore2
> , there was and still a problem with the sata drive
> not getting recognised by FC2, i have overcome this
> by changing the settings in bios (i need to do this
> everytime i boot!), also while booting it says
> Unrecognised board/chipset, but the real problem is
> that when i try to connect to the internet, i get an
> error message that my device is not recognised. From
> the start-> system-> Network connection, i selected
> the eth0 and the device type as Intel Gigabit 1000.
> > (Even after configuring the IP and settings)
> > I also tried to build the kernel to 2.6.9.XX from
> 2.6.5 but all i got is Kernel panic and FC2 fail to
> boot.
>
> You seem to have internet somehow as you can post
> here. So get the
> latest FC2 kernel - just today
> kernel-2.6.10-1.770_FC2 came out - with
> the system being online and burn it to CD. Then run
> a kernel update with
> FC2. This should help as there are many kernel based
> improvements since
> inital 2.6.5 of FC2.
>
> > My system details are
> > DELL-8400
> > INTEL-925X Express chipset with ICH6-R
> > INTEGRATED RAID CONTROLLER WITH INTEL Matrix
> storage
>
> You will have to deactivate this if enabled.
>
> > INTEGRATED GIGABIT NETWORK CONTROLLER
> > INTEL PENTIUM 4 PROCESSOR 550 WITH HT technology
> > Serial ATA Hard drive with 8mb burst cache.
> > 3GB DDR RAM.
>
> > - ash
>
> Alexander
>
>
> --
> Alexander Dalloz | Enger, Germany | GPG
> http://pgp.mit.edu 0xB366A773
> legal statement: http://www.uni-x.org/legal.html
> Fedora Core 2 GNU/Linux on Athlon with kernel
> 2.6.10-1.14_FC2smp
> Serendipity 14:06:44 up 10 days, 1:15, load average:
> 0.16, 0.30, 0.20
> > --
> fedora-list mailing list
> fedora-list(a)redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
__________________________________
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
http://birthday.yahoo.com/netrospective/
19 years, 3 months
PC Maintenance
by Mohamed Ameur
Hello every one.
Is there any thing on FC3 for General maintenance , like scanning disk
Defragment ...
Many thanks
Ameur
19 years, 3 months
FC2 -DELL 8400 INTEGRATED ETHERNET GIGABIT PROBLEM
by Ahamarshan jn
Hello,
I have a DELL-8400 Series PC with SATA drive and I dual booted it with winxp-prof and FedoraCore2 , there was and still a problem with the sata drive not getting recognised by FC2, i have overcome this by changing the settings in bios (i need to do this everytime i boot!), also while booting it says Unrecognised board/chipset, but the real problem is that when i try to connect to the internet, i get an error message that my device is not recognised. From the start-> system-> Network connection, i selected the eth0 and the device type as Intel Gigabit 1000.
(Even after configuring the IP and settings)
I also tried to build the kernel to 2.6.9.XX from 2.6.5 but all i got is Kernel panic and FC2 fail to boot.
Can anyone help me solve this problem.
I am new to Fedora.
My system details are
DELL-8400
INTEL-925X Express chipset with ICH6-R
INTEGRATED RAID CONTROLLER WITH INTEL Matrix storage
INTEGRATED GIGABIT NETWORK CONTROLLER
INTEL PENTIUM 4 PROCESSOR 550 WITH HT technology
Serial ATA Hard drive with 8mb burst cache.
3GB DDR RAM.
Any help
Thank you
- ash
---------------------------------
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
19 years, 3 months
nc
by roland
I have RH9
I run
Yum install expect nc
When I install the rpm
rpm -Uvh nx-1.4.0-0.fdr.4.i386.rpm
warning: nx-1.4.0-0.fdr.4.i386.rpm: V3 DSA signature: NOKEY, key ID
b90aee70
error: Failed dependencies:
xorg-x11 is needed by nx-1.4.0-0.fdr.4
xorg-x11-tools is needed by nx-1.4.0-0.fdr.4
what is this?
Thanks for your help
Roland Brouwers
C.A.T. bvba
Zevenbergenlaan 16
2660 ANTWERP (Hoboken)
BELGIUM
Email roland(a)cat.be
Phone + 32 475 44 31 05 * Fax + 32 3 830 33 05
19 years, 3 months
Re: New User - Help Requested
by rado
you gonna want to set up dns and sendmail it seems.
dns...not really that bad...
sendmail---not really that bad either...
But, if you want to administer them you HAVE to know them!
they are both pretty involved...more so sendmail...
in send mail you use a config file to edit a config file... lol
as far as a HOWTO for sendmail...ummmm when I was in your position, I
never could find anything like that that would suit my needs...it was a
bite the bullet thing and just learn it and make it run...actually same
w/dns
then too, after you set it up, you have to know it for when things go
wrong.
john rose
--
The only thing Micro$oft has done for society is make people believe
that computers are inherently unreliable.
19 years, 3 months
Re: I really do!
by Ian Malone
Alexander Dalloz wrote:
> Am Do, den 03.03.2005 schrieb Bill McMenemy um 9:14:
>> So, I guess I'm stuck with the 2.4.20-8 kernel, and the downlevel
>> packages that RH9 shipped with; in the words of the manic smiling
>> guy riding his
> Please don't use that kernel! It has more severe security flaws you
> can count with one hand. It is the initial RH9 kernel which got many
> updates even in the time when RH9 was supported by Red Hat (before
> EOL).
My suggestion to the OP would be to start a new thread to see
if anyone can get his Linmodem sorted out. I use a Lucent
modem and with a little messing about the drivers can be made
to compile using the kernel headers package.
W/Linmodems are definitely still a pain. I had fun with Ubuntu
when I couldn't find gcc on the Live CD[1], which really does give
you a Catch 22.
[1] Not sure if this is still the case, and apparently there is
some kind of devel package on the install CD, just not installed
by default.
--
imalone
19 years, 3 months
fc3 and raid1 problem
by rado
Alexander, FYI I think I can safely say that the problem w/with the ide
bus in that motherboard or at least in that motherboard.
right now I am installing into the 2nd disk using dma. I was never able
to get that far until I turned dma off. So all things considered, I
believe that swapping out the motherboard solved this problem.
thx for your help!
John Rose
--
The only thing Micro$oft has done for society is make people believe
that computers are inherently unreliable.
19 years, 3 months
clamav
by Ankush Grover
Hey,
I am in the process of configuring Clamav ,but i don't know which
files i need to put in cron jobs like file which will be downloading
the virus updates from the net , how to setup the clamav if there is
any virus then repair or delete the file, scanning atleast weekly the
system or scheduling etc.
I came to know about the Mailscanner ,it is the software/utility
which uses clamav and spamassassin for removing viruses and worms,i
haven't used the Mailscanner so far so don't know the full use of
it.Do i have to download updates regularly for Mailscanner just like
for clamav(virus updates) so that Mailscanner works effectively.
Please let me know if you need any other input.
Thanks & Regards
Ankush
19 years, 3 months
Re: fc3 - raid 1 setup problems
by rado
> > in Druid:
> > >new>hdb1 only>software RAID>fill to 102mb>primary partition checked
> > >new>hdb2 only>software RAID>fill to 114369
> > new>hdb3 only>swap>fill to 512
> > new>hdc1 only>software RAID>fill to 102mb>primary partition checked
> > new>hdc2 only>software RAID>fill to 114369
> > new>hdc3 only>swap>fill to 512
> >
> > >RAID>create device md(0) mountpoint = /boot >hdb1,hdc1 checked
> > >RAID>create device md(1) mountpoint = / > hdb2, hdc2 checked
>
> That looks proper.
>
> > that's bout it...chose next and we on the way...starts installing and
> > whammo...no disk space grrrrrrrrrrr ...system will reboot...just hit ok
>
> I don't think that is a RAID related problem.
>
> http://www.fedorafaq.org/fc1/#IntelD845
>
> I would try to process installation with "linux ide=nodma" booting. Or
> see the other hints regarding the different hardward.
ok I did "linux ide=nodma" ....it looks like that was the problem!
but now that opens up another can of worms. so now, yes, I am sure that
the problem was/is in the hardware and not w/my raid configuration.
during this install(which is still going on) this system has lost at
least 90% of it's speed! Considering that w/out dma, everything has to
come and go thru the processor really dragging the system down...then
also the type of operation we are asking the system to do; write to 2
hard drives instead of 1, puts more stress on the processor. It just
doesn't seem to be the route to go.
I am going to let it finish installing....2 1/2 more hrs...let it boot
up and I am really considering swapping the motherboard out w/a spare
slot A I have here and try installing normally.
At least we did narrow down the problem thx to Alexander's suggestion
john rose
19 years, 3 months