Hi!
I've just installed F26 and everything works well except my VPN
connection. It used to work perfectly under F25 and I didn't think to
save its settings. I am not however stuck. I did a few (many?) searches
and found actually different results on how to set it up. The most
common results give the following suggestions:
in advanced setting enable MSCHAP & MSCHAPv2
also enable MPPE (no stateful encryption), BSD data compression, Deflate
data compression and use TCP header compression.
Then in the user name field I forgot if I entered domain\username or
just username and entered the domain in the NT Domain box.
Thinking it could have been a F26 issue I just burn a live install of
F25 and tried, same issue.
Checking the error log using journalctl -u NetworkManager.service I am
getting:
pppd[6534]: pppd 2.4.7 started by root, uid 0
NetworkManager[837]: <info> [1500872221.0682] manager: (ppp0): new
Generic device (/org/freedesktop/NetworkManager/Devices/17)
NetworkManager[837]: Using interface ppp0
NetworkManager[837]: Connect: ppp0 <--> /dev/pts/1
pppd[6534]: Using interface ppp0
pppd[6534]: Connect: ppp0 <--> /dev/pts/1
pptp[6537]: nm-pptp-service-6516 log[main:pptp.c:356]: The synchronous
pptp option is NOT activated
NetworkManager[837]: Error: either "to" is duplicate, or "uid" is a
garbage.
pptp[6547]: nm-pptp-service-6516 log[ctrlp_rep:pptp_ctrl.c:259]: Sent
control packet type is 1 'Start-Control-Connection-Request'
pptp[6547]: nm-pptp-service-6516 log[ctrlp_disp:pptp_ctrl.c:781]:
Received Start Control Connection Reply
pptp[6547]: nm-pptp-service-6516 log[ctrlp_disp:pptp_ctrl.c:815]: Client
connection established.
pptp[6547]: nm-pptp-service-6516 log[ctrlp_rep:pptp_ctrl.c:259]: Sent
control packet type is 7 'Outgoing-Call-Request'
pptp[6547]: nm-pptp-service-6516 log[ctrlp_disp:pptp_ctrl.c:900]:
Received Outgoing Call Reply.
pptp[6547]: nm-pptp-service-6516 log[ctrlp_disp:pptp_ctrl.c:939]:
Outgoing call established (call ID 10827, peer's call ID 32612).
pppd[6534]: LCP: timeout sending Config-Requests
NetworkManager[837]: LCP: timeout sending Config-Requests
NetworkManager[837]: Connection terminated.
pppd[6534]: Connection terminated.
I am wondering what I am missing as my former set up Just Worked(tm).
Could I forgot adding a special package? Any hint will be super welcome!
Thanks a lot.
Fred