Alexander Dalloz ha scritto/wrote il giorno/on 30/11/2004 18:35:
Am Di, den 30.11.2004 schrieb antonio montagnani um 18:20:
>I upgraded from FC2 to FC3, everything is o.k with the exception of the
>ISDN card.
>
>
How was it configured with FC2? With the hisax module, the
hisax_fcpcipnp module (Fritz PCI version 2 card?) or the CAPI driver by
AVM?
>During the start up I see the Failure red mark during loading of the
>ADSL system (that was working on FC2):
>
>
What does the ISDN card has to do with ADSL?
>The card is recognized as from the output of sbin/lspci
>
>
>00:12.0 Network controller: AVM Audiovisuelles MKTG & Computer System
>GmbH A1 IS DN [Fritz] (rev 02)
>
>
> From the kernel start-up log I see:
>
>ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
>HiSax: Linux Driver for passive ISDN cards
>HiSax: Version 3.5 (module)
>HiSax: Layer1 Revision 2.46.2.5
>HiSax: Layer2 Revision 2.30.2.4
>HiSax: TeiMgr Revision 2.20.2.3
>HiSax: Layer3 Revision 2.22.2.3
>HiSax: LinkLayer Revision 2.59.2.4
>pnp: Device 00:01.00 activated.
>pnp: Device 00:01.01 activated.
>
>
So the hisax module was loaded and the ISDN card initialized.
>and this is my /etc/modules.conf
>
>
The modules.conf is not used by 2.6 kernels.
>I do not see any ISDN module??? what does it mean and how to solve it???
>
>
Did you configure the device using system-config-network?
System-config-network says that the card is already configured.
But the problem (I am not a geek) seems to be in the boot phase....but
where to carry out further investigations, no idea.
--
Antonio M.
===================================================================
Working with Mozilla Thunderbird 0.9 on Redhat Linux Fedora Core 3
===================================================================
===================================================================
Uso Mozilla Thunderbird 0.9 su Redhat Linux Fedora Core 3
www.montagnani.org
===================================================================