I'll show you how I found out, it's a useful method (not rocket science, I'm
rubbish with this kind of thing), then you'll be able to figure out if it's
running or not.
I used:
yum -y install tftp-server
When that had installed I tried
man tftp-server
Nothing. So I used:
man tftpd
More logical (I should have tried it first), that brought up a manual page.
I closed that (would have read it but you mentioned it was in /etc/xinetd.d
so I didn't bother). I went in and enabled it in /etc/xinetd.d/tftp. Then I
restarted xinetd:
service xinetd restart
Then I did:
nmap -sS 127.0.0.1
Which was stupid as in the tftp file in xinetd.d it said it was udp, so
nothing showed up. So I gave it
nmap -sU 127.0.0.1
This showed tftpd on port 69. I have a tftp server running. Maybe it's a bit
long winded, but it works for me! :D
I usually run NMap after installing / upgrading a server application, just
to see if it's there or not, it's quicker than using telnet, as, on a
windows box, telnet takes ages to figure out if it'll connect or not.
HTH,
Chris.
From: "Jonathan Carpenter" <jonathan.carpenter(a)gmail.com>
To: "Fedora-Redhat-List" <fedora-list(a)redhat.com>
Sent: Thursday, March 02, 2006 3:54 PM
Subject: Setting up a tftp-server in fedora?
I am wanting to setup a tftp-server in fedora 4, so that I can send my
configs and firmware from my cisco equitment to it. I have installed the
tftp-server using yum can found the config file in /etc/xinetd.d/tftp, I
change it from disable = yes to disable = no. but I am not sure how to start
things from xinetd. I chown +x tftp and ran ./tftp and it seemed to have
changed the status in chkconfig to on. But I am still a bit lost. I am
making this to hard?
Thanks,
--
Jonathan Carpenter
--------------------------------------------------------------------------------
--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-list