On 10/04/2014 05:13:32 PM, Sam Varshavchik wrote:
Geoffrey Leach writes:
> I have a hard-wired ethernet connection. I'm trying to get Fedora 19
to work
> with it. Firewalld configuration has scripts added to open a route
to the
> device. AFAIK, these are correct. The device is known to work.
>
> Here's the entry in /etc/sysconfig/network-scripts
>
> NAME="eno1"
> DEFROUTE="yes"
> IPV4_FAILURE_FATAL="no"
> IPV6_FAILURE_FATAL="no"
> TYPE="Ethernet"
> ONBOOT="yes"
> PEERROUTES="yes"
> IPV6INIT="yes"
> IPV6_PEERDNS="yes"
> PEERDNS="yes"
> HWADDR="E8:40:F2:05:DE:1C"
> #BOOTPROTO="dhcp"
> BOOTPROTO="static"
> IPV6_DEFROUTE="yes"
> IPV6_AUTOCONF="yes"
> IPV6_PEERROUTES="yes"
>
> IPADDR="198.168.20.5"
>
> It's basically what the install gave me with the addition of IPADDR
and
> removal of UUID (which seems to change) BOOTPROTO has changed from
dhcp to
> static.
>
> My problem is that I can't connect to the device, despite nm-tool
Define "connect to the device".
Comparing that to my own ifcfg, you are missing the PREFIX and NETMASK
settings:
YPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.0.1
PREFIX=24
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="Auto lan0"
UUID=fc87afd5-ca26-4881-b7f1-7bdcbea29f1f
ONBOOT=yes
HWADDR=BC:AE:C5:49:B9:3D
NETMASK=255.255.255.0
DEVICE=lan0
USERCTL=no
My static configuration for my WAN port also includes the GATEWAY
setting,
giving the IP address of my ISP's router, on the other side of the
bridged
connection.
Define "connect to the device". Conventional Ethernet cable. About 5 feet.
NETMASK I can do. What's the function of PERFIX? I notice refenences to $PREFIX in
scripts in /etc/sysconfig/network-scripts, but no definition (as you observed) I did not
define GATEWAY because there isn't one. The system in question is a recorder for OTA
HDTV.