Slava Bizyayev wrote:
On Tue, 2005-04-19 at 06:11, Jim Cornette wrote:
>Yuandan Zhang wrote:
>
>>Michael Hennebry wrote:
>>
>>
>>>On 16 Apr 2005, Slava Bizyayev wrote:
>>>
>>>
>>>>I use kernel-2.6.10-1.770_FC3 on my HP OmniBook XE2 pretty happily.
>>>>After updating kernel to kernel-2.6.11-1.14_FC3 I experience a strange
>>>>behavior -- in the end of the boot (instead of X-login screen) machine
>>>>freezes, and I cannot even get the terminal access with ctrl-alt-F1. Has
>>>>someone experienced something similar? What's the work around?
>>>>
>>
>>Hi, I got exactly the same problem. I upgaded kernel from
>>kernel-2.6.10-1.770_FC3 on my HP nx5000 to kernel-2.6.11-1.14_FC3, Boot
>>freezed. I troed to boot to the old kernel kernel-2.6.10-1.770_FC3, it
>>froze too.
>>
>
>If the kernel-2.6.10-1.770_FC3 used to work and then stopped working
>after upgrading to the kernel-2.6.11-1.14_FC3 version, using the
>original kernel might not be of much help. There is probably a problem
>related to something else that you installed along with the kernel
>update that is causing you problems.
>
In my case kernel-2.6.10-1.770_FC3 is running just fine when I'm quick
enough to switch on boot...
Any other ideas?
Thanks,
Slava
Intel mobo D845GBV:
kernel-2.6.11-1.14_FC3 starts fine with X.
After 1 hour or more just freezes.
Even over night with only daemons running.
Got some ACPI errors.
kernel-2.6.10-1.770_FC3 runs just fine.
mobo EP-61BXA-M (pre 2001 bios):
At boot it says the acpi can be forced by acpi=on
Same symptoms.
Lost complete installation (xfs fs).
Best regards, Bob
--
Bob Marcan, Consultant mailto:bob.marcan@snt.si
S&T Hermes Plus d.d. tel: +386 (1) 5895-300
Slandrova ul. 2 fax: +386 (1) 5895-202
1231 Ljubljana - Crnuce, Slovenia url:
http://www.snt.si