Hi folks.
I'm building a F19 box to replace my dead Bacula server and I'm trying to
emulate as close as possible the F17 install I did then. However, this
install UI is different and I've got a small probem.
I've got 2 x 3TG drives sda and sdb.
I've selected both drives (sda defaulted to boot device)
Selected Standard Partitioning
I'm in manual partitioning have done
1) + Mount point = /biosboot capacity = 1MB
got this bit by googling a previous error
partition put on sda1
2) + Mount point = /boot capacity = 50GB
Device type = RAID
/biosboot is moved to sda2
3) + Mount point = SWAP capacity = 6GB
Device type = RAID
/biosboot is moved to sda3
4) + Mount point = / capacity = 100GB
Device type = RAID
/biosboot is moved to sda4
5) + Mount point = /var/bacula
capacity = blank (default to remaining space)
Device type = RAID
At this point I press "Update settings" to store the details for the last
partition. As soon as I press the button it goes wrong and either removes
some of the partitions or all of them and I get the message
Storage configuration reset due to unrecoverable error. Click for details
On clicking I then get the message
Can't have overlapping partitions.
Can anyone tell me what I need to do to sort this.