ifcfg-eth0 file
# MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet PCI Adapter
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:40:95:78:1E:B7
ONBOOT=yes
NETMASK=255.255.0.0
IPADDR=172.19.1.42
USERCTL=no
IPV6INIT=no
PEERDNS=yes
TYPE=Ethernet
GATEWAY=192.168.1.11
ETHTOOL_OPTS="autoneg off speed 100 duplex full"
[root@gateway ~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: Not reported
Advertised auto-negotiation: No
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: off
Current message level: 0x00000000 (0)
Link detected: no
[root@gateway ~]# mii-tool eth0
eth0: 10 Mbit, half duplex, no link
I have checked the cable connection, LEDs ..everything is okay.
How to change the speed 10Mbps to 100Mbps
I have mounted Novle Netware volumes to this machine using "ncpmount
command'
On Sun, Sep 13, 2009 at 8:55 AM, Mike Wright <mike.wright(a)mailinator.com>wrote:
Gene Heskett wrote:
> On Saturday 12 September 2009, sureshbabu ct wrote:
>
>> I have a Fedora-5 machine.. with two LAN (RTL 8139 c) cards. machine is
>> being used for internet sharing .(proxy)
>> In that, one LAN card is connected to local area connection and another
>> one is connected to a Broad-band internet connection,
>>
>> while using this command
>>
>> mii-tool
>>
>> eth0: 10 Mbit, half duplex, no link
>> eth1: 10 Mbit, half duplex, no link
>>
>> how to change this to full duplex.
>>
>>
>> I have added this line in /etc/sysconfig/network-scripts/ifcfg-eth0,
>> after
>> that also it is not changing........plz help me...
>>
>> OOTPROTO=none
>>
>
> What is this OOTPROTO thing? You are missing the B that makes it
> BOOTPROTO, and I have no idea what none is supposed to do, static and dhcp
> are the 2 common arguments there.
>
Hi, Gene.
I ranted about this a couple years back. The documentation is explicit;
however, static is so widely misused that it is now tested for and set to
none. Static is not a boot protocol period punto final.
Here's the thread (you may notice a few recognizable denizens;)
http://linux.derkeiler.com/Mailing-Lists/Fedora/2007-11/msg02711.html
About half way down look for "The Official RedHat Linux Reference Guide
Chapter 12. Network Scripts"
HWADDR=00:40:95:78:1E:B7
>> ONBOOT=yes
>> NETMASK=255.255.0.0
>> IPADDR=172.19.1.42
>> USERCTL=no
>> IPV6INIT=no
>> PEERDNS=yes
>> TYPE=Ethernet
>> GATEWAY=192.168.1.11
>>
>> *ethtool -s eth0 autoneg off
>> ethtool -s eth0 speed 100 duplex full*
>>
>>
>>
>> --
>>
>
>
>
--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
--
(¨`·.·´¨) with
`·.¸(¨`·.·´¨) Luv
(¨`·.·´¨)¸.·´ Suresh Vellinezhi.
`·.¸.·´