On 02/21/2010 08:43 AM, Brian Millett wrote:
On Sat, 2010-02-20 at 17:05 -0500, Bill Davidsen wrote:
> Jatin K wrote:
>
>> Dear list
>>
>> I'm using FC 12 x86_64 on my dell vostro 1520 notebook with 160GB hdd
>> installed in it , now I want to upgrade the hdd from 160GB to 320GB
>> 7200 RPM
>>
>> is it possible to transfer fedora 12 from one hdd to another ?? I dont
>> want to re-install it as lots of software and configurations are there
>> in old one
>>
>>
it might have been mentioned before, but I use clonezilla livecd to do a
clone from one disk to a second disk. Works fast. When you are done,
use gparted to enlarge the partition on the new disk since it will be
the size of the old disk.
ok everybody
I've done it using clonezilla ...bootable iso
everything gone fine..... but one question remaining about HDD size (
how to utilize remaining space in new HDD) ..
following is the output of *fdisk -l *command
----------------------------------------------------------------------------------------------------------
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00070fea
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 204800 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 26 14593 117013441 8e Linux LVM
/dev/sda3 14594 38913 195350400 83 Linux
*Disk /dev/dm-0: 114.5 GB*, 114533859328 bytes
255 heads, 63 sectors/track, 13924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2917754c
Device Boot Start End Blocks Id System
*Disk /dev/dm-1: 5284 MB*, 5284823040 bytes
255 heads, 63 sectors/track, 642 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x42cd0139
Device Boot Start End Blocks Id System
/dev/dm-1p1 1 642 5156833+ 83 Linux
----------------------------------------------------------------------------------------------------------
question is How do I use remaining disk space /dev/dm-0 (114.5gb )
and /dem/dm-1 (5gb)
how do I create one single partition using (/dev/dm-0 and dm-1 ) ???
Regards
--
°v°
/(_)\
^ ^ Jatin Khatri
Registerd Linux user No #501175
www.counter.li.org
No M$