----- Original Message -----
From: "K. Spearel" <kas11(a)tampabay.rr.com>
To: "For users of Fedora Core releases" <fedora-list(a)redhat.com>
Sent: Saturday, May 29, 2004 10:58 PM
Subject: Re: fc2 will not install to sata
Hmmmm...the plain K8V doesn't show up at all on the USA
site...but I
found it on the GB site and the specs do differ slightly...the Lan
controller is listed as a Marvel 88E1000 whereas the K8V has a 3c940
which may or not be equivalent...the 3c940 is based on the Marvel Yukon
IP but may use different vendor and device ids...and the raid controller
is an 20376 rather than the 20378 on the deluxe...both show up in hwdata
but you would have to consult the source code (or Alan Cox) to see if
this is a potential problem ...AFAIK you really ought to be using the
SATA controller on the VIA south bridge...unless they saved 10 cents by
deleting the connectors from the BoM.
Anyhow, I see that your bios versioning is different from that of my K8V
Deluxe...heaven only knows what else is different.
KAS
Hi Kas
I definitely think that there is a problem with the fc2 stuff that handles
the sata bits on my mb as my K8V and sata hd worked fine with fc1 and suse 9
except fc1 had problems with the Marvell 88E100 lan.
As far as I knew I was using the sata controller on the south bridge as I
can disable the onboard promise controller without it effecting the install
on fc1 and suse 9 and I kept my bios and set-up the same when I attempted
the fc2 install.
That tells me that fc2 is different in some way to fc1 and can no longer
handle the sata stuff on my board, why is beyond me and unfortunately you
are talking over my head when you start talking about consulting the source
code and BoM :-(
It still makes no sense to me why fc1 will install fine but fc2 crashes on
the same hardware set-up, my logic says that if my mb and the sata
controller was supported in fc1 then it surely must be in fc1, or am I
missing something.
Jeff