Hi -
Upgraded from Fedora 29 to Fedora 31, and I'm unable to get my network bridge
working.
Any ideas on how to get this working?
I saw the other posts about adding MACADDR, but I'm not using DHCP and I don't
care
what MAC address is used.
I have a fixed IP address in my network script, this:
[umbrella network-scripts]$ more ifcfg-br0
DEVICE=br0
TYPE=Bridge
IPADDR=192.168.1.1
NETMASK=255.255.255.0
ONBOOT=yes
BOOTPROTO=static
NM_CONTROLLED=yes
DELAY=0
But AFAIR br0 did not get an IP address. I'm not 100% sure of the exact failure, as
I had difficulty using the console as it that was being spammed by a firewall
message output apparently because the bridge was not up, and I had to disable the
bridge and use one network for now so I can get normal internet access.
And then I'm bridging these two ethernet devices:
[umbrella network-scripts]$ more ifcfg-lan1
DEVICE=lan1
HWADDR=74:d0:2b:a2:7d:a9
BOOTPROTO=none
ONBOOT=yes
NM_CONTROLLED=yes
BRIDGE=br0
TYPE=Ethernet
USERCTL=no
[umbrella network-scripts]$ more ifcfg-lan2
DEVICE=lan2
HWADDR=00:48:54:62:2f:7a
BOOTPROTO=none
ONBOOT=yes
NM_CONTROLLED=yes
BRIDGE=br0
TYPE=Ethernet
USERCTL=no
Thanks ...
-- Patrick