Jorge Luis wrote:
Here's another tip for you all:
root@satyr:~# demsg | tail -12
[73223.969759] usb 4-6: USB disconnect, address 11
[73234.083956] usb 4-6: new high speed USB device using ehci_hcd and address 13
[73234.603566] usb 4-6: device not accepting address 13, error -71
[73272.550985] usb 4-6: new high speed USB device using ehci_hcd and address 15
[73272.684685] usb 4-6: configuration #1 chosen from 1 choice
[73272.697756] scsi9 : SCSI emulation for USB Mass Storage devices
[73272.702383] usb-storage: device found at 15
[73272.702391] usb-storage: waiting for device to settle before scanning
[73277.692887] usb-storage: device scan complete
[73277.694470] scsi 9:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[73277.707413] sd 9:0:0:0: [sdd] Attached SCSI disk
[73277.707491] sd 9:0:0:0: Attached scsi generic sg4 type 0
Well, the drive is being found, but it does not look like any
partitions are being found. It is being assigned as /dev/sdd. I
would try using parted or qparted on /dev/sdd. You may have to
create a new partition table. (Make sure you are using hte correct
drive before saving a new partition table!!!)
Mikkel
--
Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!