On Tue, Mar 21, 2017 at 8:24 AM, François Patte
<francois.patte(a)mi.parisdescartes.fr> wrote:
Le 21/03/2017 12:54, Tom H a écrit :
> On Tue, Mar 21, 2017 at 7:30 AM, François Patte
> <francois.patte(a)mi.parisdescartes.fr> wrote:
>> Le 21/03/2017 00:42, Ed Greshko a écrit :
>>> On 03/20/17 19:17, François Patte wrote:
>>>
>>> FWIW, I created a Virtual Machine with 2 32GB disks. I then installed
>>> an F25 KDE based system using the netinst ISO. I gave the VM 1.2GB of
>>> RAM. For the disk configuration I requested RAID1 and
>>>
>>> / of 14GB
>>> /boot of 1GB
>>> /var of 11GB
>>> swap of 2GB
>>> /home whatever was left over.
>>>
>>> After install....
>>>
>>> [egreshko@2disk ~]$ df --exclude-type=tmpfs --exclude-type=devtmpfs
>>> Filesystem 1K-blocks Used Available Use% Mounted on
>>> /dev/mapper/fedora-root 14290376 4892296 8649128 37% /
>>> /dev/md127 944568 108676 770692 13% /boot
>>> /dev/mapper/fedora-var 11407600 555420 10249660 6% /var
>>> /dev/mapper/fedora-home 4029540 258672 3543132 7% /home
>>>
>>> [egreshko@2disk ~]$ swapon
>>> NAME TYPE SIZE USED PRIO
>>> /dev/dm-1 partition 1.9G 2.9M -1
>>>
>>> [root@2disk ~]# parted
>>> Using /dev/sda
>>> (parted) print
>>> Number Start End Size Type File system Flags
>>> 1 1049kB 1001MB 1000MB primary boot, raid
>>> 2 1001MB 34.4GB 33.4GB primary raid
>>> (parted) select /dev/sdb
>>> (parted) print
>>> Number Start End Size Type File system Flags
>>> 1 1049kB 1001MB 1000MB primary boot, raid
>>> 2 1001MB 34.4GB 33.4GB primary raid
>>
>> I am sorry but I do not understand what you mean....
>
> Maybe it would've been clearer if the outputs of lvm and mdadm had
> been included, but it's clear that:
>
> - there are two mdadm raid1s of 1G and 34G,
>
> - /boot is the 1G raidvol,
>
> - /, /var, /home, and swap are LVs on the 34G raidvol.
Where do you see LV? I only see primary....
/dev/mapper/fedora-root
/dev/mapper/fedora-var
/dev/mapper/fedora-home
/dev/dm-1 partition 1.9G 2.9M -1
and
2 1001MB 34.4GB 33.4GB primary raid