Yum fails to install kernel-devel
by Luke Nath
yum -y update updated more than 11500 packages, because I had not
run updates for quite a while.
Everything installed except for kernel-devel.
So, I downloaded the file directly from
http://mirrors.kernel.org/fedora/updates/20/x86_64/kernel-devel-3.14.2-20...
then I ran yum -y install kernel-devel-3.14.2-200.fc20.x86_64.rpm
Here is the info off the screen:
# yum -y install kernel-devel-3.14.2-200.fc20.x86_64.rpm
Loaded plugins: langpacks, refresh-packagekit
Examining kernel-devel-3.14.2-200.fc20.x86_64.rpm: kernel-devel-3.14.2-200.fc20.x86_64
Marking kernel-devel-3.14.2-200.fc20.x86_64.rpm as an update to kernel-devel-3.11.10-100.fc18.x86_64
Marking kernel-devel-3.14.2-200.fc20.x86_64.rpm as an update to kernel-devel-3.13.6-200.fc20.x86_64
Resolving Dependencies
--> Running transaction check
---> Package kernel-devel.x86_64 0:3.14.2-200.fc20 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
============================================================================================================================
==================================== Package Arch Version
Repository Size
============================================================================================================================
====================================Installing:
kernel-devel x86_64 3.14.2-200.fc20 /kernel-devel-3.14.2-200.fc
20.x86_64 33 M
Transaction Summary
============================================================================================================================
====================================Install 1 Package
Total size: 33 M
Installed size: 33 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : kernel-devel-3.14.2-200.fc20.x86_64
Error unpacking rpm package kernel-devel-3.14.2-200.fc20.x86_64
error: unpacking of archive failed: cpio: mkdir
Verifying : kernel-devel-3.14.2-200.fc20.x86_64
Failed:
kernel-devel.x86_64 0:3.14.2-200.fc20
Complete!
#
Here are the sums of the file:
# md5sum kernel-devel-3.14.2-200.fc20.x86_64.rpm
0d6418857d2c6ba112077a102d41d89e kernel-devel-3.14.2-200.fc20.x86_64.rpm
# sha512sum kernel-devel-3.14.2-200.fc20.x86_64.rpm
39ccd42b2ff94e941dd75071004dc73011e98c8b092290f84d5c861c6b1614c1ca7c4d0fea3e13fd155f91bb2d6f2b47bc53c5c909f27aff607f54746acd
77be kernel-devel-3.14.2-200.fc20.x86_64.rpm
9 years, 12 months
remmina
by Patrick Dupre
Hello,
I was trying to terminate (logout or close) a remmina-vnc session,
not just disconnect!
When I reconnect, I wish to start a brand new session.
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months
Re: system-config-services
by Patrick Dupre
Sorry,
I found the issue:
iptables -I INPUT 1 -p tcp --dport 5901 -j ACCEPT
ces
>
> Hello,
>
> I am lost again!!!
> I cannot open the port:
>
> 5900/tcp closed vnc
> 5901/tcp closed vnc-1
> 5902/tcp closed vnc-2
> 5903/tcp closed vnc-3
> or
> from localhost:
> 5900/tcp closed vnc
> 5901/tcp filtered vnc-1
> 5902/tcp closed vnc-2
> 5903/tcp closed vnc-3
>
>
> while
> Using firewall-config, I check vncserver bot permanent and runtime,
> Do I need to do something else?
>
> systemctl status vncserver
> vncserver.service
> Loaded: not-found (Reason: No such file or directory)
> Active: inactive (dead)
>
> systemctl start vncserver
> Failed to issue method call: Unit vncserver.service failed to load: No such file or directory.
>
> one the server, I did vncserver and open :1
>
> Both machines are on the same network
> vncviewer fails error 111 (unable to connect to socket)
> remmina-vnc fails too (it ass the ssh password and sleep!)
>
> It looks like to that I am not able to reopen this port, while it has works!!!!!
> I am missing one point:
>
> Both dbus.service and .socket are active without error
>
> Sorry for my incompetence!
>
> >
> > On 05/03/14 02:42, Patrick Dupre wrote:
> > > Hello,
> > >
> > > When I reun system-config-services, I get
> > >
> > > ERROR:dbus.proxies:Introspect error on :1.980:/org/fedoraproject/Config/Services/ServiceHerders/XinetdServiceHerder: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
> > >
> > >
> > > I checked:
> > > systemctl status dbus.service
> > > systemctl status dbus.socket
> > >
> > > But there are active.
> > >
> > > What is wrong?
> >
> > Well, you checked them....they are "active" .... but there are errors...
> >
> >
> > systemctl status dbus.service
> > dbus.service - D-Bus System Message Bus
> > Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
> > Active: active (running) since Thu 2014-05-01 18:30:32 CEST; 6h ago
> > Main PID: 965 (dbus-daemon)
> > CGroup: /system.slice/dbus.service
> > ├─ 965 /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
> > ├─4753 /usr/bin/python /usr/share/system-config-services/system-config-services-mechanism.py
> > └─4755 /usr/libexec/gam_server
> >
> > May 02 01:24:44 Homere dbus-daemon[965]: follow_name_owner_changes=follow_name_owner_changes)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
> > May 02 01:24:44 Homere dbus-daemon[965]: self._named_service = conn.activate_name_owner(bus_name)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 175, in activate_..._owner
> > May 02 01:24:44 Homere dbus-daemon[965]: return self.get_name_owner(bus_name)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 361, in get_name_owner
> > May 02 01:24:44 Homere dbus-daemon[965]: 's', (bus_name,), **keywords)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in ca...ocking
> > May 02 01:24:44 Homere dbus-daemon[965]: message, timeout)
> > May 02 01:24:44 Homere dbus-daemon[965]: DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply....roken.
> > Hint: Some lines were ellipsized, use -l to show in full.
> >
> > You'll need to investigate that....
> >
> > --
> > Do not condemn the judgment of another because it differs from your own. You may both be wrong. -- Dandemis
> > --
> > users mailing list
> > users(a)lists.fedoraproject.org
> > To unsubscribe or change subscription options:
> > https://admin.fedoraproject.org/mailman/listinfo/users
> > Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> > Have a question? Ask away: http://ask.fedoraproject.org
>
>
> ===========================================================================
> Patrick DUPRÉ | | email: pdupre(a)gmx.com
> Laboratoire de Physico-Chimie de l'Atmosphère | |
> Université du Littoral-Côte d'Opale | |
> Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
> 189A, avenue Maurice Schumann | | 59140 Dunkerque, France
> ===========================================================================
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months
packages
by Patrick Dupre
Hello,
I made the following packages because they either do not existed
or because they were wrong.
I can donate them to the community if it make sense.
perl-Chart-Clicker-2.88-1.fc20.noarch.rpm
perl-Chart-GRACE-0.95-1.fc20.noarch.rpm
perl-Color-Scheme-1.06-1.fc20.noarch.rpm
perl-define-1.02-1.fc20.noarch.rpm
perl-Forest-0.10-1.fc20.noarch.rpm
perl-Geometry-Primitive-0.24-1.fc20.noarch.rpm
perl-Graphics-Color-0.29-1.fc20.noarch.rpm
perl-Graphics-Primitive-0.65-1.fc20.noarch.rpm
perl-Graphics-Primitive-Driver-Cairo-0.46-1.fc20.noarch.rpm
perl-Layout-Manager-0.35-1.fc20.noarch.rpm
perl-Math-Function-Roots-0.065-1.fc20.noarch.rpm
perl-Math-Integral-Romberg-0.04-1.fc20.noarch.rpm
perl-Sort-Fields-0.90-1.fc20.noarch.rpm
perl-String-Scanf-2.1-1.fc20.noarch.rpm
perl-Text-Flow-0.01-1.fc20.noarch.rpm
perl-Tk-FontDialog-0.17-1.fc20.noarch.rpm
perl-Tk-LineGraphDataset-0.01-1.fc20.noarch.rpm
perl-Tk-PlotDataset-2.04-1.fc19.noarch.rpm
system-config-lvm-1.1.18-1.fc20.noarch.rpm
perl-Math-GSL-0.27-1.fc20.x86_64.rpm
perl-PDL-Graphics-PLplot-0.67-1.fc20.x86_64.rpm
perl-PDL-LAPACK-0.12-1-1.fc20.x86_64.rpm
perl-PDL-LinearAlgebra-0.08-1.fc20.x86_64.rpm
perl-tk-zinc-3.303-1.fc20.x86_64.rpm
The i686 versions are also available.
There are running fine, however, 1 or 2 may require to be installed
with rpm and the --nodeps option. This is not clear why, because the
packages are already installed!
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months
yum update
by Patrick Dupre
Hello,
When I update fedora 20, I get a glitch with some packages of fedora 21!
Should I remove rpmfusion-free-rawhide?
Packages skipped because of dependency problems:
ffmpeg-libs-2.2.1-1.fc21.x86_64 from rpmfusion-free-rawhide
x264-libs-0.142-4.20140423gite260ea5.fc21.x86_64 from rpmfusion-free-rawhide
I also had to remove vlc!
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months
system-config-services
by Patrick Dupre
Hello,
When I reun system-config-services, I get
ERROR:dbus.proxies:Introspect error on :1.980:/org/fedoraproject/Config/Services/ServiceHerders/XinetdServiceHerder: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I checked:
systemctl status dbus.service
systemctl status dbus.socket
But there are active.
What is wrong?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months
bitcoin miner
by Paul Cartwright
I have been reading about bitcoins lately & thought I would install &
look at it. from the bitcoin.org web site I tried to install every miner
program they showed, without success. always dependency issues or
errors. Is there a bitcoin miner program that works for fedora 20 amd_64??
--
Paul Cartwright
Registered Linux User #367800 and new counter #561587
9 years, 12 months
fail2ban on fc20
by David Mehler
Hello,
Is anyone running fail2ban on fc20 with firewalld? I'm trying to get
this working and finding a lot of bug reports on this but not an rpm
that goes out of the box.
I'd prefer not to have to revert to iptables but I want to stop brute
force attempts.
Thanks.
Dave.
9 years, 12 months
Re: perl
by Patrick Dupre
YEs,
Thank you.
I found the issue.
There were 2 perl-PDL installed for a while.
I cleaned every things right.
> On 30 April 2014 19:01, Patrick Dupre <pdupre(a)gmx.com> wrote:
> > Hello,
> >
> > I do not understand,
> >
> > I have 2 machines fedora 20 x86_64.
> > On one my application run fine, on the other one I get an error:
> > Perl API version v5.16.0 of PDL::Core does not match v5.18.0 at /usr/lib64/perl5/DynaLoader.pm line 213.
> > Compilation failed in require at (eval 42) line 6.
> > BEGIN failed--compilation aborted at (eval 42) line 6.
> > BEGIN failed--compilation aborted at /home/pdupre/Spectroscopy/Stepram/Input_windows.pm line 12.
> >
> >
> > At line 12 there is
> > use PDL ;
> >
> > Both perl-PDL are the same.
> >
> > How can I debug?
>
> The error says that one of your machines has a version of PDL
> installed that was built against the wrong version of Perl. You have
> Perl 5.18 installed, but the PDL library was build for Perl 5.16. PDL
> is an "XS-based" library. That means that a lot of it is made up of C
> code. Perl doesn't guarantee binary compatibility between major
> versions so XS-based libraries need to be rebuilt for a new version.
>
> The question then becomes, how did your system get into that state. I
> can suggest two possibilities.
>
> 1/ Your system was upgraded from a previous version of Fedora which
> was running Perl 5.16 and for some reason the upgrade didn't pull in
> the new version of the RPM. You say that both systems have the same
> perl-PDL installed, but how similar are they? They might be the same
> version number but built for different Perl versions (or, rather,
> different versions of Fedora). What do you get if you run 'rpm -q
> perl-PDL' on each of the systems?
>
> If this is the problem, then you can probably fix it by running "yum
> reinstall perl-PDL".
>
> 2/ Your system was upgraded from previous version of Fedora which was
> running Perl 5.16 and that older installation had a version of PDL
> which was installed through cpan, not rpm/yum. It's possible that the
> cpan-installed version is in an different directory to the
> yum-installed version and that the cpan-installed version's directory
> appears earlier on the @INC path. This would mean the Perl completely
> ignores the yum-installed version. Try running these three command and
> report back what you get.
>
> perl -MPDL -le'print $INC{"PDL.pm"}'
> rpm -ql perl-PDL | grep PDL.pm
> perl -le'print $_ for @INC'
>
> Hope this helps,
>
> Dave...
>
> --
> Dave Cross :: dave(a)dave.org.uk
> http://dave.org.uk/
> @davorg
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months
perl
by Patrick Dupre
Hello,
I do not understand,
I have 2 machines fedora 20 x86_64.
On one my application run fine, on the other one I get an error:
Perl API version v5.16.0 of PDL::Core does not match v5.18.0 at /usr/lib64/perl5/DynaLoader.pm line 213.
Compilation failed in require at (eval 42) line 6.
BEGIN failed--compilation aborted at (eval 42) line 6.
BEGIN failed--compilation aborted at /home/pdupre/Spectroscopy/Stepram/Input_windows.pm line 12.
At line 12 there is
use PDL ;
Both perl-PDL are the same.
How can I debug?
Thanks
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
9 years, 12 months