Re: perl-Math-GSL
by Patrick Dupre
Hello
Thank for your concern.
I got it from cpan and I used
cpanspec
rpmbuild -bb
and I still have missing packages
Marking /home/pdupre/rpm/RPMS/i686/perl-Math-GSL-0.27-1.fc19.i686.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package perl-Math-GSL.i686 0:0.27-1.fc19 will be installed
--> Processing Dependency: perl(Chart::Clicker::Drawing) for package: perl-Math-GSL-0.27-1.fc19.i686
--> Processing Dependency: perl(Chart::Clicker::Drawing::Insets) for package: perl-Math-GSL-0.27-1.fc19.i686
--> Processing Dependency: perl(Tk::LineGraphDataset) for package: perl-Math-GSL-0.27-1.fc19.i686
--> Processing Dependency: perl(Tk::PlotDataset) for package: perl-Math-GSL-0.27-1.fc19.i686
Packages skipped because of dependency problems:
perl-Math-GSL-0.27-1.fc19.i686 from /perl-Math-GSL-0.27-1.fc19.i686
I have not been able to build up these 4 packages
perl-Math-GSL is a key package for me, but it could be very popular if it maintained by fedora
project.
I have issues when building 2 other packages:
perl-PDL-LAPACK.spec
perl-PDL-LinearAlgebra.spe
RPM build errors:
File not found by glob: /home/pdupre/rpm/BUILDROOT/perl-PDL-LAPACK-0.12-1.fc19.i386/usr/share/perl5/vendor_perl/*
Processing files: perl-PDL-LinearAlgebra-0.06-1.fc19.noarch
error: File not found by glob: /home/pdupre/rpm/BUILDROOT/perl-PDL-LinearAlgebra-0.06-1.fc19.i386/usr/share/perl5/vendor_perl/*
Thank for any help.
Regards.
>
> On 07/21/13 02:58, Patrick Dupre wrote:
> > To end the installation of perl-Math-GSL-0.27-1.fc19.i686.rpm
>
> I could not find perl-Math-GSL in the F19 repositories..... Where did you get it?
>
> --
> Getting tired of non-Fedora discussions and self-serving posts
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 11 months
RE: F19 raid 1 stuck read only after reboot
by Alan Gagne
> >>/ />/ Jul 19 07:35:26 knucklehead.xxxx.com kernel: device-mapper: table:
> />>/ />/ 253:4: linear: dm-linear: Device lookup failed
> />>/ />/ Jul 19 07:35:26 knucklehead.xxxx.com kernel: device-mapper: ioctl:
> />>/ />/ error adding target to table
> />>/ /
> />>/ It seems likely that this is what causes your problem. When you google
> />>/ for the error message, there are a lot of reports about it. You could
> />>/ look into them and try to figure out how to solve the issue --- someone
> />>/ said old meta information caused it, someone else said removing a
> />>/ package that provides dmraid fixed it for them ...
> />/ Yea, I have been looking at those. I was hoping that between here and
> />/ filing a bug
> />/ I would get the best answer.
> /
> The dmraid package seems to be installed by default. I'd try to remove
> it.
Tried it. No Joy !
Back to Google .
Thanks
Alan
10 years, 11 months
perl-Math-GSL
by Patrick Dupre
Hello,
To end the installation of perl-Math-GSL-0.27-1.fc19.i686.rpm
I need the following packages:
---> Package perl-Math-GSL.i686 0:0.27-1.fc19 will be installed
--> Processing Dependency: perl(Chart::Clicker::Drawing) for package: perl-Math-GSL-0.27-1.fc19.i686
--> Processing Dependency: perl(Chart::Clicker::Drawing::Insets) for package: perl-Math-GSL-0.27-1.fc19.i686
--> Processing Dependency: perl(Tk::LineGraphDataset) for package: perl-Math-GSL-0.27-1.fc19.i686
--> Processing Dependency: perl(Tk::PlotDataset) for package: perl-Math-GSL-0.27-1.fc19.i686
Packages skipped because of dependency problems:
However,
1) perl-Tk-LineGraphDataset-0.01-1.fc19.noarch
is already installed:
2) cpanspec Tk-PlotDataset-2.04.tar.gz
give an error:
BOGUS PATH DETECTED: ./
BOGUS PATH DETECTED: ./Tk-PlotDataset/
BOGUS PATH DETECTED: ./Tk-PlotDataset/MANIFEST
3) Chart::Clicker::Drawing
is supposed to come with: Chart::Clicker::Drawing::ColorAllocator which is supposed
to be in Chart::Clicker
which is installed
(perl-Chart-Clicker-2.86-1.fc19.noarch)
4) Same thing with Chart::Clicker::Drawing::Insets
It may be a problem with perl/cpan.
Did somebody was able to install perl-Math-GSL?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 11 months
perl-LinearAlgebra
by Patrick Dupre
Hello,
I am trying to make a rpm package from PDL-LinearAlgebra-0.06.tar.gz
It is OK upto:
RPM build errors:
File not found by glob: /home/pdupre/rpm/BUILDROOT/perl-PDL-LinearAlgebra-0.06-1.fc19.i386/usr/share/perl5/vendor_perl/*
File not found by glob: /home/pdupre/rpm/BUILDROOT/perl-PDL-LinearAlgebra-0.06-1.fc19.i386/usr/bin/*
The test is OK
here is the spec file:
Name: perl-PDL-LinearAlgebra
Version: 0.06
Release: 1%{?dist}
Summary: Linear Algebra utils for PDL
License: CHECK(GPL+ or Artistic)
Group: Development/Libraries
URL: http://search.cpan.org/dist/PDL-LinearAlgebra/
Source0: http://www.cpan.org/modules/by-module/PDL/PDL-LinearAlgebra-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildArch: noarch
BuildRequires: perl(ExtUtils::MakeMaker)
Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
%description
This module provides a convenient interface to PDL::LinearAlgebra::Real and
PDL::LinearAlgebra::Complex. Its primary purpose is educational. You have
to know that routines defined here are not optimized, particularly in term
of memory. Since Blas and Lapack use a column major ordering scheme some
routines here need to transpose matrices before calling fortran routines
and transpose back (see the documentation of each routine). If you need
optimized code use directly PDL::LinearAlgebra::Real and
PDL::LinearAlgebra::Complex. It's planned to "port" this module to
PDL::Matrix such that transpositions will not be necessary, the major
problem is that two new modules need to be created PDL::Matrix::Real and
PDL::Matrix::Complex.
%prep
%setup -q -n PDL-LinearAlgebra-%{version}
%build
%{__perl} Makefile.PL INSTALLDIRS=vendor
make %{?_smp_mflags}
%install
rm -rf $RPM_BUILD_ROOT
make pure_install PERL_INSTALL_ROOT=$RPM_BUILD_ROOT
find $RPM_BUILD_ROOT -type f -name .packlist -exec rm -f {} \;
find $RPM_BUILD_ROOT -depth -type d -exec rmdir {} 2>/dev/null \;
%{_fixperms} $RPM_BUILD_ROOT/*
%check
make test
%clean
rm -rf $RPM_BUILD_ROOT
%files
%defattr(-,root,root,-)
%doc Artistic Changes Config README
%{perl_vendorlib}/*
%{_mandir}/man3/*
%changelog
* Sat Jul 20 2013 Patrick Dupre 0.06-1
- Specfile autogenerated by cpanspec 1.78.
The file seems to be in:
../BUILDROOT/perl-PDL-LinearAlgebra-0.06-1.fc19.i386/usr/lib/perl5/vendor_perl
Thank for your help
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 11 months
Re: rpmbuild
by Patrick Dupre
OK, it works
>
> > Hello,
> >
> > I am trying to make a rpm package from
> > Math-GSL-0.27.tar.gz
> > Hence, I made:
> > rpmbuild -bb perl-Math-GSL.spec --nocheck
> >
> > and I get errors like:
> >
> > Checking for unpackaged file(s): /usr/lib/rpm/check-files
> > /home/pdupre/rpmbuild/BUILDROOT/perl-Math-GSL-0.27-1.fc19.i386
> > error: Installed (but unpackaged) file(s) found:
> > /usr/bin/smoke_some_mathgsl
> > /usr/bin/smolder_mathgsl
> > /usr/bin/smolder_smoke_signal
> > /usr/share/man/man1/smolder_smoke_signal.1.gz
> >
>
> Looks like you're missing some entries in %files:
>
> %{_bindir}/* (should list binaries individually, this is cheating, but it
> works)
> %{_mandir}/man1/*.1.gz
>
> Richard
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 11 months
Font warning
by Timothy Murphy
I get this warning on my Fedora-19/KDE laptop, from several applications
(acroread is one):
===================
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 14:
reading configurations from ~/.fonts.conf is deprecated.
===================
What, if anything, should I do about this?
--
Timothy Murphy
e-mail: gayleard /at/ eircom.net
tel: +353-86-2336090, +353-1-2842366
School of Mathematics, Trinity College, Dublin 2, Ireland
10 years, 11 months
Re: rpmbuild (spec file)
by Patrick Dupre
Hello,
I am trying to make a rpm package from
Math-GSL-0.27.tar.gz
Hence, I made:
rpmbuild -bb perl-Math-GSL.spec --nocheck
and I get errors like:
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pdupre/rpmbuild/BUILDROOT/perl-Math-GSL-0.27-1.fc19.i386
error: Installed (but unpackaged) file(s) found:
/usr/bin/smoke_some_mathgsl
/usr/bin/smolder_mathgsl
/usr/bin/smolder_smoke_signal
/usr/share/man/man1/smolder_smoke_signal.1.gz
RPM build errors:
Installed (but unpackaged) file(s) found:
/usr/bin/smoke_some_mathgsl
/usr/bin/smolder_mathgsl
/usr/bin/smolder_smoke_signal
/usr/share/man/man1/smolder_smoke_signal.1.gz
This is what is in my spec file:
%files
%defattr(-,root,root,-)
%doc Changes CREDITS examples KNOWN_BUGS META.json pm pod README.md swig TODO xs xt
%{perl_vendorarch}/auto/*
%{perl_vendorarch}/Math*
%{_mandir}/man3/*
%changelog
* Sat Jul 20 2013 Patrick Dupre 0.27-1
- Specfile autogenerated by cpanspec 1.78.
What should I do?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 11 months
rpmbuild
by Patrick Dupre
Hello,
I am trying to make a rpm package from
Math-GSL-0.27.tar.gz
Hence, I made:
rpmbuild -bb perl-Math-GSL.spec --nocheck
and I get errors like:
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pdupre/rpmbuild/BUILDROOT/perl-Math-GSL-0.27-1.fc19.i386
error: Installed (but unpackaged) file(s) found:
/usr/bin/smoke_some_mathgsl
/usr/bin/smolder_mathgsl
/usr/bin/smolder_smoke_signal
/usr/share/man/man1/smolder_smoke_signal.1.gz
RPM build errors:
Installed (but unpackaged) file(s) found:
/usr/bin/smoke_some_mathgsl
/usr/bin/smolder_mathgsl
/usr/bin/smolder_smoke_signal
/usr/share/man/man1/smolder_smoke_signal.1.gz
What should I do?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 11 months