start openvpn client on boot fedora 17 64bit
by Brian West
I have an account with strong vpn im trying to get openvpn to start on
boot in fedora 17 but it is not playing nice at all people say set it up
in network manager but with strongvpn you login via a cert thats
included inside your config file. how can i start it as a service i
followed the steps in the wikki with no luck. can i make /etc/rc.local
executable then place the command in there?
thanks
Brian
11 years, 5 months
Re: Getting rid of nepomukserver
by R. G. Newbury
Ed wrote
>On 11/22/2012 12:29 PM, R. G. Newbury wrote:
>> >
>> >I have turned off 'Desktop Search' in Settings. I have deleted all executables in /usr/bin with 'nepomuk' in the name (and virtuoso). I have nuked the nepomuk folders hiding down in ~/.kde.
>> >But after I rebooted I*still* ended up with a 'nepomukserver' running.
>> >ps -aux says it is started by kde4init. Setting 'autostart' to false in/usr/share/./autostart/nepomukserver.desktop
>> >stops that from happening, but*where* is the executable instance which kdeinit is starting? I wish to nuke it too.
>> >
> FWIW, I have unchecked "Nepomuk Sematic Desktop" in the Desktop Search section of the KDE "System Settings" and upon clicking apply the server is no longer running.
> Only /usr/bin/nepomukcontroller remains.
I am quite sure that that's the first thing I did. Noted as the first
item. I then nuked every executable I could find. So if I failed to
'Apply' the setting, where is the executable which kdeinit *then* started.
.
> System Settings -> Startup and Shutdown -> Service Manager. Uncheck
> Nepomuk Search Module.
>
> Login and Logout if required. No need to "nuke" anything. Well, maybe
> virtuoso.
> Gabriel
Thanks. What a stupidly obtuse system for wasting cycles. I didn't even
know that there was another complete level of 'service' management. Now
it is turned off, it still does not answer the question:
Where is the damn executable which the service starts.
This sort of layered obscurity pisses me off. And the user cannot nuke
the libs, since they are "dependencies" of all sorts of other actually
useful bits of the install.
Geoff
11 years, 5 months
linux-wlan-ng module
by Timothy Murphy
I have an ancient Intel Pro/Wireless WUD2011BWW USB device
which works fine under Windows XP,
and which I'd like to get working under Fedora.
As far as I can see, this requires the linux-wlan-ng module,
which doesn't appear to be included with the kernel any more.
If anyone has any suggestions how to install this
(or any other way to get this device working under Linux)
--
Timothy Murphy
e-mail: gayleard /at/ eircom.net
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College Dublin
11 years, 5 months
mounting one usb interface (from 2 identified)
by Ranjan Maitra
Hi,
Following up on my previous e-mail, I wanted to mention that two usb
interfaces are being recognized. Here is the relevant output of
% usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bb4 ProdID=0c02 Rev=02.22
S: Manufacturer=ARNOVA 10
S: Product=ARNOVA 10
S: SerialNumber=11223344
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=256mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42
Prot=01 Driver=(none)
I want to mount this as a USB storage device, so that i can access the
filesystem.
Question: How do I mount the first interface?
Many thanks and best wishes,
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be
deleted on receipt. For those needing to send personal or professional
e-mail, please use appropriate addresses.
____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop!
Check it out at http://www.inbox.com/marineaquarium
11 years, 5 months
linux-wlan-ng module
by Timothy Murphy
I have an ancient Intel Pro/Wireless WUD2011BWW USB device
which works fine under Windows XP,
and which I'd like to get working under Fedora.
As far as I can see, this requires the linux-wlan-ng module,
which doesn't appear to be included with the kernel any more.
If anyone has any suggestions how to install this
(or any other way to get this device working under Linux)
I should be most grateful.
11 years, 5 months
Have to keep reinstalling LILO was Re: UEFI is a POS
by Robert Myers
On Fri, Nov 23, 2012 at 2:45 AM, Michael Cronenworth wrote:
> There is a default location for the EFI loader that Fedora is not using (but is for USB/CD).
While we are on the subject of boot loaders:
I have been wiping hard disks from systems that are no longer in use.
One disk, which had been part of a booting striped raid, would not
even allow me to dd to it, or so I thought, because I couldn't even
read the partition table. I marked the disk as borked and moved on.
Then the Windows OS on the machine I was using to wipe disks became so
corrupted that I could only boot it into a live CD, which was good
enough, but I still wanted access to those old Windows files and
didn't want to continue using a live CD as my only way of accessing
the machine.
Since the machine would never be used for web-surfing (for which
purpose I use another Linux distribution that I will never mention
again on this list), I installed Fedora on the borked disk just to see
what would happen. Before attempting the install, I deliberately
overwrote the MBR. The Fedora install went through just fine, but
then the system wouldn't boot, not even putting LILO on the drive with
an intact MBR.
Long story short, with LILO on the original Windows drive, if I ever
turn the power off, I have to "reinstall" Fedora, which merely
reinstalls LILO, and everything goes through just fine, including the
reboot. That is to say, Anaconda can find the new drive, install to
it, and correctly set some volatile boot pointer to the new drive that
gets lost if I ever turn off the power.
It's merely a nuisance, and I *really* don't want to try to fix the
MBR on the second drive any more than I already have (using MSI-SYS).
Any suggestions? Why can't Anaconda permanently tell LILO where the
second drive is? Presumably because the bios gets there ahead of LILO
and screws everything up after I have powered down, but that's only a
guess.
Robert.
11 years, 5 months
Need help with building rpms
by Suvayu Ali
Hi,
I am trying to build my own rpm for mutt. I am using the spec file from
the Fedora srpm. During the build it fails on the following command.
if test -f $BUILDROOT/usr/bin/mutt_dotlock && test xmail != x ; then \
chgrp mail $BUILDROOT/usr/bin/mutt_dotlock && \
chmod 2755 $BUILDROOT/usr/bin/mutt_dotlock || \
{ echo "Can't fix mutt_dotlock's permissions!" >&2 ; exit 1 ; } \
fi
This is the error message I get.
chgrp: changing group of `$BUILDROOT/usr/bin/mutt_dotlock': Operation not permitted
Can't fix mutt_dotlock's permissions!
make[4]: *** [install-exec-hook] Error 1
I then realised only root can call chgrp, so I tried to build with mock.
But I still get the same failure. I have successfully used mock to
build notmuch and git before. What am I doing wrong this time?
Thanks in advance for any suggestions,
--
Suvayu
Open source is the future. It sets us free.
11 years, 5 months
why does this rsync commands copy again the same files?
by M. Fioretti
Greetings,
I am running Fedora 16 x86_64. When I connect an external USB drive
and rsync to it my pictures with this command:
rsync -rvt --delete --no-o --no-g /home/z/photo/ /media/Verbatim/photo
because I don't care about ownership and permissions, I just want to
have the same files,with the same names and modification times, in the
same hierarchy of folders.
However, rsync keeps copying certain folders and pictures, and always
the same ones, every time, even if they are not changed at all. If I
rsync, unmount and unplug the drive, then plug it in again and re-run
the command above, rsync copies again hundreds of pictures to the
drive. What am I missing here?
FIY, the source folder is ext4, the destination vfat (see their mount
entries below)
TIA,
Marco
/dev/sda7 on /home type ext4 (rw,relatime,seclabel,data=ordered)
/dev/sdb1 on /media/Verbatim type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=cp437,i
11 years, 5 months
sdctl and STANDBY
by JD
I have been trying to prevent my 2 external seagate drives from
spinning down into STANDBY mode.
When I use
sdctl -c STANDBY /dev/sdb
I get
/dev/sdb: ATA ST3500341AS CC1H
Change mode page: failed fetching page: Power condition
I get the same error for my smaller 500GB ST3500641AS.
So, now that sdctl cannot disable standby mode in these
drives, how safe is it to resort to using hdparm, the man page
of which is full of warning with regards to disabling the standby mode.
To wit:
-s Enable/disable the power-on in standby feature, if
supported by the drive. VERY DANGEROUS. Do not use unless you are
absolutely certain that both the system BIOS (or firmware) and the
operating system kernel (Linux >= 2.6.22) support probing for drives
that use this feature. When enabled, the drive is powered-up in the
standby mode to allow the controller to sequence the spin-up of
devices, reducing the instantaneous current draw burden when many
drives share a power supply. Primarily for use in large RAID setups.
This feature is usually disabled and the drive is powered-up in the
active mode (see -C above). Note that a drive may also allow enabling
this feature by a jumper. Some SATA drives support the control of this
feature by pin 11 of the SATA power connector. In these cases, this
command may be unsupported or may have no effect.
Would like some input from those who have actually used hdparm to
disable the standby mode.
11 years, 5 months
What are these for?
by lee
Hi,
what is auditd for? The manpage doesn't tell me, and I can't find any
documentation about it telling me what the purpose is. Is there
anything that speaks against disabling it?
Similar with mcelog: What do I need that for? And benefits from it? I
can probably just disable it.
Do I need polkitd? It doesn't make sense to me; if I want to do
something for which more permissions are required, I do it as root. So
what's the benefit I would have from polkitd?
And I still don't see what makes the light of the onboard SATA
controllers flash all the time. Why is it flashing though nothing
connected to the controllers is mounted? See
https://bugzilla.redhat.com/show_bug.cgi?id=878042
--
Fedora 17
11 years, 5 months