I just got a gigabyte switch for my home network and I still haven't figured out how to display the tx/rx data rate of each nic connected to the switch. Also, the leds for the F9 computer is not lighted on the switch, although F9 is accessing the internet.
What command will display the rx/tx data rates of each nic?
Thanks.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Dave Feustel schrieb:
I just got a gigabyte switch for my home network and I still haven't figured out how to display the tx/rx data rate of each nic connected to the switch. Also, the leds for the F9 computer is not lighted on the switch, although F9 is accessing the internet.
What command will display the rx/tx data rates of each nic?
If you plug the cable into the switch, the linkt will go up. dmesg shows the speed and dumplex negotiation.
HTH, Uwe
Hi Dave
/sbin/mii-tool eth0: negotiated 100baseTx-FD, link ok
rpm -ql net-tools /bin/dnsdomainname /bin/domainname /bin/hostname /bin/netstat /bin/nisdomainname /bin/ypdomainname /etc/ethers /etc/netplug /etc/netplug.d /etc/netplug.d/netplug /etc/netplug/netplugd.conf /etc/rc.d/init.d/netplugd /sbin/arp /sbin/ether-wake /sbin/ifconfig /sbin/ipmaddr /sbin/iptunnel /sbin/mii-diag /sbin/mii-tool /sbin/nameif /sbin/netplugd /sbin/plipconfig /sbin/route /sbin/slattach /usr/share/doc/net-tools-1.60 /usr/share/doc/net-tools-1.60/COPYING /usr/share/doc/net-tools-1.60/README.netplugd /usr/share/doc/net-tools-1.60/TODO.netplugd /usr/share/locale/cs/LC_MESSAGES/net-tools.mo /usr/share/locale/de/LC_MESSAGES/net-tools.mo /usr/share/locale/et_EE/LC_MESSAGES/net-tools.mo /usr/share/locale/fr/LC_MESSAGES/net-tools.mo /usr/share/locale/pt_BR/LC_MESSAGES/net-tools.mo /usr/share/man/de/man1/dnsdomainname.1.gz /usr/share/man/de/man1/domainname.1.gz /usr/share/man/de/man1/hostname.1.gz /usr/share/man/de/man1/nisdomainname.1.gz /usr/share/man/de/man1/ypdomainname.1.gz /usr/share/man/de/man5/ethers.5.gz /usr/share/man/de/man8/arp.8.gz /usr/share/man/de/man8/ifconfig.8.gz /usr/share/man/de/man8/netstat.8.gz /usr/share/man/de/man8/plipconfig.8.gz /usr/share/man/de/man8/route.8.gz /usr/share/man/de/man8/slattach.8.gz /usr/share/man/fr/man1/dnsdomainname.1.gz /usr/share/man/fr/man1/domainname.1.gz /usr/share/man/fr/man1/hostname.1.gz /usr/share/man/fr/man1/nisdomainname.1.gz /usr/share/man/fr/man1/ypdomainname.1.gz /usr/share/man/fr/man5/ethers.5.gz /usr/share/man/fr/man8/arp.8.gz /usr/share/man/fr/man8/ifconfig.8.gz /usr/share/man/fr/man8/netstat.8.gz /usr/share/man/fr/man8/plipconfig.8.gz /usr/share/man/fr/man8/route.8.gz /usr/share/man/fr/man8/slattach.8.gz /usr/share/man/man1/dnsdomainname.1.gz /usr/share/man/man1/domainname.1.gz /usr/share/man/man1/hostname.1.gz /usr/share/man/man1/nisdomainname.1.gz /usr/share/man/man1/ypdomainname.1.gz /usr/share/man/man5/ethers.5.gz /usr/share/man/man8/arp.8.gz /usr/share/man/man8/ether-wake.8.gz /usr/share/man/man8/ifconfig.8.gz /usr/share/man/man8/mii-diag.8.gz /usr/share/man/man8/mii-tool.8.gz /usr/share/man/man8/nameif.8.gz /usr/share/man/man8/netplugd.8.gz /usr/share/man/man8/netstat.8.gz /usr/share/man/man8/plipconfig.8.gz /usr/share/man/man8/route.8.gz /usr/share/man/man8/slattach.8.gz /usr/share/man/pt/man1/dnsdomainname.1.gz /usr/share/man/pt/man1/domainname.1.gz /usr/share/man/pt/man1/hostname.1.gz /usr/share/man/pt/man1/nisdomainname.1.gz /usr/share/man/pt/man1/ypdomainname.1.gz /usr/share/man/pt/man8/arp.8.gz /usr/share/man/pt/man8/ifconfig.8.gz /usr/share/man/pt/man8/netstat.8.gz /usr/share/man/pt/man8/route.8.gz
suomi
Dave Feustel wrote:
I just got a gigabyte switch for my home network and I still haven't figured out how to display the tx/rx data rate of each nic connected to the switch. Also, the leds for the F9 computer is not lighted on the switch, although F9 is accessing the internet.
What command will display the rx/tx data rates of each nic?
Thanks.
On Sun, Apr 19, 2009 at 05:39:21PM +0200, fedora wrote:
Hi Dave
/sbin/mii-tool eth0: negotiated 100baseTx-FD, link ok
Thanks for the reference. Man mii-tool says this utility does not cover 1G nics and is obsolete. It recommends ethtool instead. '/sbin/ethtool eth0' says that the ic is running at 100mb/s although it has 1G/s capability. So I am curious why the nic does not initialize to 1G or light up the port led on the 1G switch.
rpm -ql net-tools /bin/dnsdomainname
/bin/domainname
/bin/hostname /bin/netstat /bin/nisdomainname /bin/ypdomainname /etc/ethers /etc/netplug /etc/netplug.d /etc/netplug.d/netplug /etc/netplug/netplugd.conf /etc/rc.d/init.d/netplugd /sbin/arp /sbin/ether-wake /sbin/ifconfig /sbin/ipmaddr /sbin/iptunnel /sbin/mii-diag /sbin/mii-tool /sbin/nameif /sbin/netplugd /sbin/plipconfig /sbin/route /sbin/slattach /usr/share/doc/net-tools-1.60 /usr/share/doc/net-tools-1.60/COPYING /usr/share/doc/net-tools-1.60/README.netplugd /usr/share/doc/net-tools-1.60/TODO.netplugd /usr/share/locale/cs/LC_MESSAGES/net-tools.mo /usr/share/locale/de/LC_MESSAGES/net-tools.mo /usr/share/locale/et_EE/LC_MESSAGES/net-tools.mo /usr/share/locale/fr/LC_MESSAGES/net-tools.mo /usr/share/locale/pt_BR/LC_MESSAGES/net-tools.mo /usr/share/man/de/man1/dnsdomainname.1.gz /usr/share/man/de/man1/domainname.1.gz /usr/share/man/de/man1/hostname.1.gz /usr/share/man/de/man1/nisdomainname.1.gz /usr/share/man/de/man1/ypdomainname.1.gz /usr/share/man/de/man5/ethers.5.gz /usr/share/man/de/man8/arp.8.gz /usr/share/man/de/man8/ifconfig.8.gz /usr/share/man/de/man8/netstat.8.gz /usr/share/man/de/man8/plipconfig.8.gz /usr/share/man/de/man8/route.8.gz /usr/share/man/de/man8/slattach.8.gz /usr/share/man/fr/man1/dnsdomainname.1.gz /usr/share/man/fr/man1/domainname.1.gz /usr/share/man/fr/man1/hostname.1.gz /usr/share/man/fr/man1/nisdomainname.1.gz /usr/share/man/fr/man1/ypdomainname.1.gz /usr/share/man/fr/man5/ethers.5.gz /usr/share/man/fr/man8/arp.8.gz /usr/share/man/fr/man8/ifconfig.8.gz /usr/share/man/fr/man8/netstat.8.gz /usr/share/man/fr/man8/plipconfig.8.gz /usr/share/man/fr/man8/route.8.gz /usr/share/man/fr/man8/slattach.8.gz /usr/share/man/man1/dnsdomainname.1.gz /usr/share/man/man1/domainname.1.gz /usr/share/man/man1/hostname.1.gz /usr/share/man/man1/nisdomainname.1.gz /usr/share/man/man1/ypdomainname.1.gz /usr/share/man/man5/ethers.5.gz /usr/share/man/man8/arp.8.gz /usr/share/man/man8/ether-wake.8.gz /usr/share/man/man8/ifconfig.8.gz /usr/share/man/man8/mii-diag.8.gz /usr/share/man/man8/mii-tool.8.gz /usr/share/man/man8/nameif.8.gz /usr/share/man/man8/netplugd.8.gz /usr/share/man/man8/netstat.8.gz /usr/share/man/man8/plipconfig.8.gz /usr/share/man/man8/route.8.gz /usr/share/man/man8/slattach.8.gz /usr/share/man/pt/man1/dnsdomainname.1.gz /usr/share/man/pt/man1/domainname.1.gz /usr/share/man/pt/man1/hostname.1.gz /usr/share/man/pt/man1/nisdomainname.1.gz /usr/share/man/pt/man1/ypdomainname.1.gz /usr/share/man/pt/man8/arp.8.gz /usr/share/man/pt/man8/ifconfig.8.gz /usr/share/man/pt/man8/netstat.8.gz /usr/share/man/pt/man8/route.8.gz
suomi
Dave Feustel wrote:
I just got a gigabyte switch for my home network and I still haven't figured out how to display the tx/rx data rate of each nic connected to the switch. Also, the leds for the F9 computer is not lighted on the switch, although F9 is accessing the internet.
What command will display the rx/tx data rates of each nic?
Thanks.
-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Dave Feustel wrote:
On Sun, Apr 19, 2009 at 05:39:21PM +0200, fedora wrote:
Hi Dave
/sbin/mii-tool eth0: negotiated 100baseTx-FD, link ok
Thanks for the reference. Man mii-tool says this utility does not cover 1G nics and is obsolete. It recommends ethtool instead. '/sbin/ethtool eth0' says that the ic is running at 100mb/s although it has 1G/s capability. So I am curious why the nic does not initialize to 1G or light up the port led on the 1G switch.
rpm -ql net-tools /bin/dnsdomainname
/bin/domainname
/bin/hostname /bin/netstat /bin/nisdomainname /bin/ypdomainname /etc/ethers /etc/netplug /etc/netplug.d /etc/netplug.d/netplug /etc/netplug/netplugd.conf /etc/rc.d/init.d/netplugd /sbin/arp /sbin/ether-wake /sbin/ifconfig /sbin/ipmaddr /sbin/iptunnel /sbin/mii-diag /sbin/mii-tool /sbin/nameif /sbin/netplugd /sbin/plipconfig /sbin/route /sbin/slattach /usr/share/doc/net-tools-1.60 /usr/share/doc/net-tools-1.60/COPYING /usr/share/doc/net-tools-1.60/README.netplugd /usr/share/doc/net-tools-1.60/TODO.netplugd /usr/share/locale/cs/LC_MESSAGES/net-tools.mo /usr/share/locale/de/LC_MESSAGES/net-tools.mo /usr/share/locale/et_EE/LC_MESSAGES/net-tools.mo /usr/share/locale/fr/LC_MESSAGES/net-tools.mo /usr/share/locale/pt_BR/LC_MESSAGES/net-tools.mo /usr/share/man/de/man1/dnsdomainname.1.gz /usr/share/man/de/man1/domainname.1.gz /usr/share/man/de/man1/hostname.1.gz /usr/share/man/de/man1/nisdomainname.1.gz /usr/share/man/de/man1/ypdomainname.1.gz /usr/share/man/de/man5/ethers.5.gz /usr/share/man/de/man8/arp.8.gz /usr/share/man/de/man8/ifconfig.8.gz /usr/share/man/de/man8/netstat.8.gz /usr/share/man/de/man8/plipconfig.8.gz /usr/share/man/de/man8/route.8.gz /usr/share/man/de/man8/slattach.8.gz /usr/share/man/fr/man1/dnsdomainname.1.gz /usr/share/man/fr/man1/domainname.1.gz /usr/share/man/fr/man1/hostname.1.gz /usr/share/man/fr/man1/nisdomainname.1.gz /usr/share/man/fr/man1/ypdomainname.1.gz /usr/share/man/fr/man5/ethers.5.gz /usr/share/man/fr/man8/arp.8.gz /usr/share/man/fr/man8/ifconfig.8.gz /usr/share/man/fr/man8/netstat.8.gz /usr/share/man/fr/man8/plipconfig.8.gz /usr/share/man/fr/man8/route.8.gz /usr/share/man/fr/man8/slattach.8.gz /usr/share/man/man1/dnsdomainname.1.gz /usr/share/man/man1/domainname.1.gz /usr/share/man/man1/hostname.1.gz /usr/share/man/man1/nisdomainname.1.gz /usr/share/man/man1/ypdomainname.1.gz /usr/share/man/man5/ethers.5.gz /usr/share/man/man8/arp.8.gz /usr/share/man/man8/ether-wake.8.gz /usr/share/man/man8/ifconfig.8.gz /usr/share/man/man8/mii-diag.8.gz /usr/share/man/man8/mii-tool.8.gz /usr/share/man/man8/nameif.8.gz /usr/share/man/man8/netplugd.8.gz /usr/share/man/man8/netstat.8.gz /usr/share/man/man8/plipconfig.8.gz /usr/share/man/man8/route.8.gz /usr/share/man/man8/slattach.8.gz /usr/share/man/pt/man1/dnsdomainname.1.gz /usr/share/man/pt/man1/domainname.1.gz /usr/share/man/pt/man1/hostname.1.gz /usr/share/man/pt/man1/nisdomainname.1.gz /usr/share/man/pt/man1/ypdomainname.1.gz /usr/share/man/pt/man8/arp.8.gz /usr/share/man/pt/man8/ifconfig.8.gz /usr/share/man/pt/man8/netstat.8.gz /usr/share/man/pt/man8/route.8.gz
suomi
Dave Feustel wrote:
I just got a gigabyte switch for my home network and I still haven't figured out how to display the tx/rx data rate of each nic connected to the switch. Also, the leds for the F9 computer is not lighted on the switch, although F9 is accessing the internet.
What command will display the rx/tx data rates of each nic?
Thanks.
Make sure you are using a cat 5e or 6 cable for gigabit. If the cable is old this could be why it only connects at 100Mb/s.
Stewart Williams wrote:
Dave Feustel wrote:
I just got a gigabyte switch for my home network and I still haven't figured out how to display the tx/rx data rate of each nic connected to the switch. Also, the leds for the F9 computer is not lighted on the switch, although F9 is accessing the internet.
What command will display the rx/tx data rates of each nic?
Thanks.
Make sure you are using a cat 5e or 6 cable for gigabit. If the cable is old this could be why it only connects at 100Mb/s.
You could have trimmed the message down to this, and done a better job of communicating your advice. It makes things much easier to read without the 2 pages of file listings.
Mikkel
Dave Feustel wrote:
On Sun, Apr 19, 2009 at 05:39:21PM +0200, fedora wrote:
Hi Dave
/sbin/mii-tool eth0: negotiated 100baseTx-FD, link ok
Thanks for the reference. Man mii-tool says this utility does not cover 1G nics and is obsolete. It recommends ethtool instead. '/sbin/ethtool eth0' says that the ic is running at 100mb/s although it has 1G/s capability. So I am curious why the nic does not initialize to 1G or light up the port led on the 1G switch.
In the future, could you please trim your posts? It isn't really necessary to quote the entire message.
TIA Mikkel