On 07/01/2009 03:28 PM, Mick M.
wrote:
> Hi;
> I would like some input on disk
partitions.
> I bought a 1TB sata drive, it works fine,
>
> At the moment my system has 3 drives 1 160M IDE and 2
sata 250M and 1TB.
> The IDE is for XP, as it will not see the SATA
drives.
>
> I want to remove the IDE drive and install XPx64 on
the new drive as a VirtualBox image.
> I also want to install F11 on that drive.
>
> My other SATA drive is F10, I want to leave that alone
and dual boot F10/F11.
>
> OK - what do you suggest for partitions on this
drive?
> I want to use "regular" partitions - not the default
LVM stuff.
>
> I was thinking:
> 1 /boot ext3 200M
> 2 swap 82 4G ( I have 2G memory)
> 3 / ext4 250G
> 4 extended rest about 750G with ext3
>
> Will VirtualBox work with ext4?
>
I went ahead and installed F11 on the new sata drive:
[root@localhost ~]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00e8e373
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 550 4217062+ 82 Linux swap / Solaris
/dev/sda3 551 30401 239778157+ 83 Linux
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0008ead9
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 26 208813+ 83 Linux
/dev/sdb2 27 1071 8393962+ 82 Linux swap / Solaris
/dev/sdb3 1072 33707 262148670 83 Linux
/dev/sdb4 33708 121601 706008555 5 Extended
/dev/sdb5 33708 72871 314584798+ 83 Linux
/dev/sdb6 72872 121601 391423693+ 83 Linux
It installed fine (thanks developers!! very nice).
I formatted /dev/sdb3 as ext4, the others ext3.
sdb5 and sdb6 are empty ext3, I may delete them and just go sdb5 ext4.
The sata problem with xp refers to the install, it needs drivers.
However under VirtualBox it works just fine.
[root@localhost ~]# rpm -qa Virt*
VirtualBox-3.0.0_49315_fedora11-1.x86_64
I got lucky in that VirtualBox had just gone to 3.0.
I used an expanding drive up to 10G (all defaults).
I had to "rescue" the system after I removed the IDE drive.
Then edit /boot/grub/grub.conf to get F10 working.
So far ext4 is transparent, no programs flake or die because of it.
The only problem was very slow firefox dns, solved in about:config.
(thanks to Tim Largy on this list)
I followed the MJM guide for F11 for multimedia and am very happy.
Plus I have another IDE drive to stick in my old Snap server 4100.
I dont like the LVM stuff, rescue cd's fail with it.
As far as swap goes - this is a 1000G drive! 2xram (I hope to get 4G total) seems
standard.
Mick