How can I find the modules names ?!
If I cat /proc/modules the scsi line is:
Scsi_mod 119313 3 BusLogic,sr_mod,sd_mod, Live -0xd096c000
-----Original Message-----
From: fedora-list-bounces(a)redhat.com
[mailto:fedora-list-bounces@redhat.com] On Behalf Of Sam Varshavchik
Sent: Saturday, July 01, 2006 11:35 AM
To: For users of Fedora Core releases
Subject: Re: Hardware Migration with FC4
Rodrigo F. Rogerio writes:
I hope someone may be able to give me an Idea in what to do here, I
have a web server that was installed originally on a dual P3 with IDE
drives, I am trying to transferred to a VM on a GSX server and
everything worked well and good. Same specifications "sort of" smp
with
IDE drives.
My problem now is... I am trying to move this machine to a VM on a
ESX
server with SCSI drives because ESX won't create IDE hard disks,
I've
fixed the boot loader and everything but I receive this message every
time I try to boot.
SCSI drivers are not compiled into the kernel, they're modules that must
be added to initrd, and loaded by nash.
mkinitrd reads /etc/modules.conf, and picks off the module names that
get aliased to scsi_hostadapter*, then adds them to the initrd image.
What you need to do is to identify which kernel module supports your
SCSI controller, temporary append "alias scsi_hostadapter <MODULE>" to
your /etc/modules.conf, and run mkinitrd. You should be able to use the
resulting initrd image to boot off a SCSI hard drive.