Am Do, den 03.03.2005 schrieb Ahamarshan jn um 14:02:
Please don't send HTML formatted mails to this list. Thank you.
And you shouldn't write the subject in caps. This is bad style
(shouting) and even triggers spam detection.
I have a DELL-8400 Series PC with SATA drive and I dual booted it
with winxp-prof and FedoraCore2 , there was and still a problem with the sata drive not
getting recognised by FC2, i have overcome this by changing the settings in bios (i need
to do this everytime i boot!), also while booting it says Unrecognised board/chipset, but
the real problem is that when i try to connect to the internet, i get an error message
that my device is not recognised. From the start-> system-> Network connection, i
selected the eth0 and the device type as Intel Gigabit 1000.
(Even after configuring the IP and settings)
I also tried to build the kernel to 2.6.9.XX from 2.6.5 but all i got is Kernel panic and
FC2 fail to boot.
You seem to have internet somehow as you can post here. So get the
latest FC2 kernel - just today kernel-2.6.10-1.770_FC2 came out - with
the system being online and burn it to CD. Then run a kernel update with
FC2. This should help as there are many kernel based improvements since
inital 2.6.5 of FC2.
My system details are
DELL-8400
INTEL-925X Express chipset with ICH6-R
INTEGRATED RAID CONTROLLER WITH INTEL Matrix storage
You will have to deactivate this if enabled.
INTEGRATED GIGABIT NETWORK CONTROLLER
INTEL PENTIUM 4 PROCESSOR 550 WITH HT technology
Serial ATA Hard drive with 8mb burst cache.
3GB DDR RAM.
- ash
Alexander
--
Alexander Dalloz | Enger, Germany | GPG
http://pgp.mit.edu 0xB366A773
legal statement:
http://www.uni-x.org/legal.html
Fedora Core 2 GNU/Linux on Athlon with kernel 2.6.10-1.14_FC2smp
Serendipity 14:06:44 up 10 days, 1:15, load average: 0.16, 0.30, 0.20