On Tue, 1 Mar 2005 06:22:02 -0500 (EST), Robert P. J. Day
<rpjday(a)mindspring.com> wrote:
is there somewhere a short writeup on device allocation/assignment
for a targus USB port replicator? (that is, single USB port expansion
to
2 USB ports
2 PS/2 ports
serial port
parallel port
i can see numerous messages generated in /var/log/messages when i plug
one in, but i'm still trying to parse what special device files i'd
use to refer to each new port. thanks.
Supposing the device does not need special drivers, I guess the USB
ports are just connected to an internal hub and should work without
drivers. You can test them by plugging in a known supported device.
The PS/2 ports (keyboard and mouse I guess) can work out of the box.
I'm using a Belkin PS/2 to USB converter which didn't require driver
changes. Make sure you're using the correct ports for keyboard and
mouse (they are different).
The first USB to serial converters registers as /dev/ttyUSB0, printer
devices as /dev/usblp0, but maybe the port uses another protocol.
It would help to have the log messages ;)
Klaasjan