Where would I place modelines, what section?
Have a dual-monitor setup, I graphic card (2 connectors) It's working, but there is some vertical up\down movement, which I'm guessing is due to the widesreen monitors. xorg ati-driver being used.
Below is xorg.conf in case info is required.
Frank
--------------------------------------------
# Xorg configuration created by system-config-display (some hand edits)
Section "ServerLayout" Identifier "Multihead layout" Screen 0 "Screen0" LeftOf "Screen1" Screen 1 "Screen1" 0 0 InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "on" Option "Clone" "off" EndSection
Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "gb" EndSection
Section "Monitor" Identifier "Monitor1" VendorName "LG Electronics" ModelName "LG L194WT (Analog)" HorizSync 28.0 - 83.0 VertRefresh 56.0 - 75.0 Option "dpms" EndSection
Section "Monitor" Identifier "Monitor1" VendorName "Dell" ModelName "Dell E178WFP" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 77.0 Option "dpms" EndSection
Section "Device" Identifier "Videocard0" Driver "radeon" EndSection
Section "Device" Identifier "Videocard1" Driver "radeon" VendorName "Videocard Vendor" BoardName "ATI Technologies Inc RV280 [Radeon 9200 PRO]" BusID "PCI:1:3:0" Screen 1 EndSection
Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1440x900" EndSubSection EndSection
On Sat, 23 Feb 2008 10:41:24 +0000 Frank Murphy frankly3d-fedoracore@utvinternet.com wrote:
Where would I place modelines, what section?
Near as I can tell, the version of X that comes on fedora 8 comes with a radeon driver that utterly refuses to accept any ModeLine info you might try to specify manually.
On Sat, 2008-02-23 at 07:05 -0500, Tom Horsley wrote:
On Sat, 23 Feb 2008 10:41:24 +0000 Frank Murphy frankly3d-fedoracore@utvinternet.com wrote:
Where would I place modelines, what section?
Near as I can tell, the version of X that comes on fedora 8 comes with a radeon driver that utterly refuses to accept any ModeLine info you might try to specify manually.
Had a look at the linked patch: https://bugs.freedesktop.org/show_bug.cgi?id=10205
Can someone fill me in how to apply\use it?, as diff files are not something have used to play with as yet.
Frank