On Sat, 25 Dec 2004, Mark Weaver wrote:
Bob Chiodini wrote:
> Mark Weaver wrote:
>
>> David Corrigan wrote:
>>
>>> I'm about to install Fedora Core 3 on an SATA harddrive, anyone have
>>> any tips or advice before I start? I've heard about some peoples
>>> problems and want to do my best to avoid them.
>>>
>>> David.
>>>
>>
>> Hi David,
>>
>> My experience with FC3 and SATA drives is it really depends on the
>> controller and whether or not the CD drive is IDE or not. I recently had
>> the unpleasant experience of attempting to install FC3 on an HP Proliant
>> and no matter how hard we tried and no matter what we tried it wouldn't go
>> on correctly. We'd get the system to install ok, but it wouldn't boot.
>> kept on dying in the first stages of the boot with kernel panic because it
>> couldn't see the partitions where the OS was located.
>>
>> the problem came down to a catch 22 because of the particular kernel
>> driver that "had" to be present in order to be able to install and run
FC
>> with the controller that was in the machine. Had we been trying to install
>> RH Enterprise Linux that would have been a different story.
>>
>> What we finally ended up doing was installing Mandrake 10.0 on this
>> machien and its running fine. My advice to you is to research fully your
>> hardware compatibility before embarking.
>>
> Just installed FC3 on a MSI K8N Neo2 Platinum Socket 939 with a 120GB SATA
> drive. No problems that I've noticed. Uses the nv_sata driver. It just
> worked as they say.
>
> Bob...
>
I've heard from some using the VIA chipset that they were able to install and
run with no problem, however the workstation with a VIA chipset I had tried
to install on wouldn't take the install.
works for me on a k8t neo fisr2 which is a via k8t800 with a VT8237 south
bridge, I have some disks on the promise 20378 which also works.
also I've done several installs on servers with intel H6300ESB sata
controlers and they've all been fine.
Clearly others' milage varies a lot
compared to mine. but its all good information. I like the VIA chipset, but I
like the OS and hardware to work better, so the more responses we get to this
thread the better. That way we'll know which chipsets and SATA setups readily
accept the FC3 installation.
--
--------------------------------------------------------------------------
Joel Jaeggli Unix Consulting joelja(a)darkwing.uoregon.edu
GPG Key Fingerprint: 5C6E 0104 BAF0 40B0 5BD3 C38B F000 35AB B67F 56B2