My Dell Dimension 4500 desktop also failed to boot after upgrading to kernel-2.6.12-1.1387_FC4. I was able to boot successfully by disabling acpi as suggested below, but the less-drastic solution of only adding the parameter "pci=noacpi" to the kernel command line also works. I didn't try "acpi=noirq", perhaps that would work, too.
--Mike
Kazutoshi Morioka wrote:
I removed "rhgb quiet" from kernel command line and got these messages:
...snip... ALI15X3: IDE controller at PCI slot 0000:00:10.0 ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using IRQ 0 PCI: setting IRQ 0 as level-triggered ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
So, it seems an ACPI IRQ probing problem. I added "acpi=off" to kernel command line, the laptop booted well. But, I'm not very happy because power is won't off when shutdown...
On Sat, 2 Jul 2005 15:04:51 +0900 Kazutoshi Morioka morioka@at.wakwak.com wrote:
After yum update to kernel-2.6.12-1.1387_FC4, my laptop Compaq nx9005 dosen't boot. messages are:
root (hd0,1) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.12-1.1387_FC4 ro root=LABEL=/ rhgb quiet [Linux-bzImage, setup=0x1e00, size=0x18d7d9] initrd /initrd-2.6.12-1.1387_FC4.img [Linux-initrd @ 0xddd1000, 0x10e936 bytes]
Uncompressing Linux... Ok, booting the kernel. Warning: ATI Radeon IGP Northbridge is not yet fully tested.
The last message, "Warning: ATI ..." has been displayed sinse older kernel.
-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list