On 19 Jul 2013 at 12:27, Steven Stern wrote:
Date sent: Fri, 19 Jul 2013 12:27:46 -0500 From: Steven Stern subscribed-lists@sterndata.com To: Community support for Fedora users users@lists.fedoraproject.org Subject: Re: Error message that pops up in terminal windows.
On 07/19/2013 12:16 PM, Michael D. Setzer II wrote:
This message shows up in terminal windows from time to time. Any ideals on what is doing it and how to correct it.
WARNING: Your hard drive is failing Device: /dev/sda [SAT], 1 Offline uncorrectable sectors
WARNING: Your hard drive is failing Device: /dev/sda [SAT], 2 Offline uncorrectable sectors
smartctl shows the disk is fine in both short and long test on disk and partitions. At one time the machine was reporting all kinds of soft errors with smartctl, and I replaced the disk with this new one, and it continued to get the soft errors. Then installed a pci sata controller instead of the on-board controller, and errors stopped? So, I assumed the issue was with the onboard controller, and not the disk, since it was brand new, and had put the old disk in another machine, and it also has no issues. But the above error messages come up, and I would like to correct it, but don't know what comand or program could resolve it.
Please post the output from smartcl -a /dev/sda
It is a long list, and the 2108 errors was the number listed under the old controller. No new errors were reported since changing the controller.
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.6.11-4.fc16.i686] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.D Device Model: Hitachi HDS721010DLE630 Serial Number: MSK523Y210UTUF LU WWN Device Id: 5 000cca 37fce785b Firmware Version: MS2OA650 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sat Jul 20 04:39:21 2013 ChST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7216) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 121) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 080 080 016 Pre-fail Always - 1311407 2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 76 3 Spin_Up_Time 0x0007 112 112 024 Pre-fail Always - 203 (Average 206) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 4 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 108 108 020 Pre-fail Offline - 37 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4498 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 33 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 33 194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 25/39) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 160 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1609
SMART Error Log Version: 1 ATA Error Count: 2108 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2108 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 ea 28 20 00 Error: ICRC, ABRT 1 sectors at LBA = 0x002028ea = 2107626
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 e3 28 20 e0 08 01:10:51.049 READ DMA c8 00 08 db 28 20 e0 08 01:10:51.049 READ DMA c8 00 08 d3 28 20 e0 08 01:10:51.049 READ DMA c8 00 08 cb 28 20 e0 08 01:10:51.049 READ DMA c8 00 08 c3 28 20 e0 08 01:10:51.049 READ DMA
Error 2107 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 31 f2 28 20 00 Error: ICRC, ABRT 49 sectors at LBA = 0x002028f2 = 2107634
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 23 28 20 e0 08 01:10:50.694 READ DMA 25 00 80 63 3e 20 e0 08 01:10:50.660 READ DMA EXT c8 00 00 23 27 20 e0 08 01:10:50.505 READ DMA c8 00 00 23 26 20 e0 08 01:10:50.502 READ DMA c8 00 00 23 25 20 e0 08 01:10:50.500 READ DMA
Error 2106 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 da 1f 20 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00201fda = 2105306
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 d3 1f 20 e0 08 01:10:49.714 READ DMA c8 00 08 cb 1f 20 e0 08 01:10:49.714 READ DMA c8 00 08 c3 1f 20 e0 08 01:10:49.714 READ DMA c8 00 08 bb 1f 20 e0 08 01:10:49.714 READ DMA c8 00 08 b3 1f 20 e0 08 01:10:49.714 READ DMA
Error 2105 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 37 f7 03 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0003f737 = 259895
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 30 f7 03 e0 08 01:09:57.762 READ DMA EXT 25 00 08 28 f7 03 e0 08 01:09:57.762 READ DMA EXT 25 00 05 23 f7 03 e0 08 01:09:57.762 READ DMA EXT 25 00 03 20 f7 03 e0 08 01:09:57.762 READ DMA EXT 25 00 08 18 f7 03 e0 08 01:09:57.762 READ DMA EXT
Error 2104 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 0f b1 03 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0003b10f = 241935
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 08 b1 03 e0 08 01:09:47.327 READ DMA EXT 25 00 08 00 b1 03 e0 08 01:09:47.327 READ DMA EXT 25 00 08 f8 b0 03 e0 08 01:09:47.326 READ DMA EXT 25 00 08 f0 b0 03 e0 08 01:09:47.326 READ DMA EXT 25 00 08 e8 b0 03 e0 08 01:09:47.326 READ DMA EXT
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4393 - # 2 Short offline Completed without error 00% 4392 - # 3 Short offline Completed without error 00% 4392 - # 4 Short offline Completed without error 00% 4392 - # 5 Short offline Completed without error 00% 4355 - # 6 Extended offline Completed: read failure 80% 2580 311179552 # 7 Extended offline Completed without error 00% 2316 - # 8 Extended offline Completed without error 00% 8 - # 9 Short offline Completed without error 00% 4 - #10 Short offline Interrupted (host reset) 90% 3 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
--
-- Steve
users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
+----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:mikes@kuentos.guam.net mailto:msetzerii@gmail.com http://www.guam.net/home/mikes Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +----------------------------------------------------------+
http://setiathome.berkeley.edu (Original) Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes (Total Hours: 287,489)
BOINC@HOME CREDITS SETI 15467805.750086 | EINSTEIN 12420999.979852 ROSETTA 7991573.921902 | ABC 16163435.340645