On 05/15/2009 05:33 AM, Mike Martin wrote:
Hi I have F10 running network manager
Both wireless and wireless work fine independently, however when network cable is plugged in wireless says it is connected (as per applet) but cannot access any sites .
Any idea what is going on here?
The important issue here is what does the routing table look like. With both connected, run the route(8) command with the -n parameter. Take a look at your route while on wireless only Kernel IP routing table with Wireless only Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0U 2 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 Kernel IP routing table with both wireless and wired note default route. Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 2 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
I've seen cases where NM fails to set up the default route.