users February 2021

users@lists.fedoraproject.org

75 participants
63 discussions

What the blazes?
by Beartooth 05 Feb '21

05 Feb '21

[root@localhost ~]# dnf upgrade Fedora 33 openh264 (From Cisco) - x86_64 3.2 kB/s | 2.5 kB 00:00 Fedora Modular 33 - x86_64 3.0 MB/s | 3.3 MB 00:01 Fedora Modular 33 - x86_64 - Updates 3.2 MB/s | 3.0 MB 00:00 Fedora 33 - x86_64 - Updates 3.4 MB/s | 23 MB 00:06 Fedora 33 - x86_64 8.2 MB/s | 72 MB 00:08 Opera packages 14 kB/s | 13 kB 00:00 RPM Fusion for Fedora 33 - Free - Updates 431 kB/s | 383 kB 00:00 RPM Fusion for Fedora 33 - Free 824 kB/s | 897 kB 00:01 RPM Fusion for Fedora 33 - Nonfree - Updates 172 kB/s | 61 kB 00:00 RPM Fusion for Fedora 33 - Nonfree 740 kB/s | 278 kB 00:00 Segmentation fault (core dumped) [root@localhost ~]# What now?? -- Beartooth Implacable, Erstwhile Historian of Tongues Who shall gather the smoke of the dead wood burning, Or behold the flowing years from the Sea returning? -- JRR Tolkien

2 1

libcrypto vs XnView
by Patrick Dupre 04 Feb '21

04 Feb '21

Hello, To run XnView, here is what it is recommended: you need to remove lib/libcrypto* from package https://newsgroup.xnview.com/viewtopic.php?p=165437#p165437 What do you think ? libcrypto* belong to openssl-libs When I try to remove the package, I get Problem: The operation would result in removing the following protected packages: sudo (try to add '--skip-broken' to skip uninstallable packages) =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================

3 5

Compressed arecord out -
by Bob Goodwin 04 Feb '21

04 Feb '21

arecord tstxx will produce a wav file and ffmpeg -i tstxx.mp3 to a file aplay will play. How can I put them together in one command or if there is a simpler and better way, how to get a compressed output file from arecord? Bob -- Bob Goodwin - Zuni, Virginia, USA FEDORA-32/64bit LINUX XFCE Fastmail POP3

3 3

Change UId range, renumber user ids
by Friedrich Schäuffelhut 04 Feb '21

04 Feb '21

Hello, last year I set up a FreeIPA installation. It works very well! I lately discovered a problem with /etc/subuid and /etc/subgid used by rootless Podman (may be also Docker) containers. During setup we decided to start the UID range exactly at 100.000. We picked that for no real reason other than we wanted a round number... We thought it would make sense and din't give it a second though. What we did not know at that time is: The /etc/subuid and /etc/subgid system used by rootless Podman (may be also Docker) containers also starts exactly with uid 100.000. So now if we would add users to /etc/subuid and /etc/subgid those users would be allowed using UID/GID fro the FreeIPA range. This requires attention each time a user is added to /etc/subuid and /etc/subgid and therefore can lead to potential security issues. We use configuration management for setting up our systems but we would prefer if we could achieve a safe default. We would like to fix this without reinstalling FreeIPA. We have already a number of hosts, users and certificates enrolled. I am now looking for a way to move the FreeIPA UID range to a different area, e.g. 10.000 - 20.000. We run 3 replicas connected to each other. I found the ipa comands 'idrange-add' and 'idrange-del' and wonder if I could use those to 1. add a new range at 10.000 2. Update UIDs of existing users 3. remove the old range at 100.000. I am a bit hesitant trying this without understanding what complications I could run in. Do you have any suggestions? Best Friedrich Schäuffelhut

5 7

Key was rejected by service
by Paolo Galtieri 03 Feb '21

03 Feb '21

Folks, I have installed vmware on Fedora 33. It does not start due to the following error: modprobe vmmon modprobe: ERROR: could not insert 'vmmon': Key was rejected by service modprobe vmnet modprobe: ERROR: could not insert 'vmnet': Key was rejected by service dmesg shows vmmon: Loading of unsigned module is rejected The modules have been compiled from source. How do I get around this issue so I can run vmware? Any help is appreciated. Paolo

4 6

Windows 10 + F33 + SSD + RAID
by Paolo Galtieri 03 Feb '21

03 Feb '21

Folks, I have a new dell laptop. I tried to install Fedora 33 on it, but it failed to find any disks. I searched the internet and discovered that if my BIOS has RAID enabled F33 is unable to find any drives. I disabled RAID and enable AHCI and was then able to install and boot F33. I then tried to boot Windows 10. This failed until I entered the bitlock key. I then went back into the BIOS and re-enabled RAID and verified Windows 10 boots without error, but Fedora 33 no longer does since it can't find any drives. What if I want RAID enabled? Is there a solution to this problem? Paolo

9 12

update-crypto-policies & Apache
by Jeffrey Ross 03 Feb '21

03 Feb '21

System is Fedora 33 I'm attempting to enable Perfect Forwarding Secrecy (PFS) in Apache. I started by setting the options I wanted in Apache only to find that the SSL options for Ciphers are ignored in the Apache configuration and instead are pulled from /etc/crypto-policies/back-ends directory. I was able to disallow any TLS protocol below 1.2 in opensslcnf.config, but not sure what I need to enable PFS. Suggestions would be appreciated. Thanks Jeff

2 1

Re: Backing up system
by gmspro 02 Feb '21

02 Feb '21

Hi, http://www.sysresccd.org/Download With the SystemRescueCd I backed up the /dev/sda6 partition in /mnt/backup/ naming "diskimage" After backing up operation the file has the automatic extension like "diskimage.000". Is this file ok to restore? If I name it "diskimage.gz" then it is automatically renamed with this extension "diskimage.gz.000" But here below http://www.sysresccd.org/Screenshots the file is name like this: "diskimage.pimg" Do I have to name with the .pimg extension during backup to restore correctly? And how can I restore it?

7 7

Community meeting today 11:00 AM EST
by Daniel Walsh 02 Feb '21

02 Feb '21

https://podman.io/community/meeting/ https://bluejeans.com/796412039 Agenda * 11:00 -> 11:05 - Welcome! * 11:05 -> 11:20 - Podman v3.0 Overview - Matt Heon * 11:20 -> 11:30 - Podman Compose Demo - Brent Baude * 11:30 -> 11:40 - Demo’s TBD - Tom Sweeney and more? * 11:40 -> 11:55 - Open Forum/Questions and Answers Session * 11:55 -> 12:00 - Next Meeting, Topics for Next Meeting, and Wrap up

2 1

dracut error on upgrade to kernel 5.10.11
by sean darcy 02 Feb '21

02 Feb '21

Running scriptlet: kernel-core-5.10.11-200.fc33.x86_64 174/174 dracut-install: No SOURCE argument given Usage: dracut-install -D DESTROOTDIR [-r SYSROOTDIR] [OPTION]... -a SOURCE... or: dracut-install -D DESTROOTDIR [-r SYSROOTDIR] [OPTION]... SOURCE DEST or: dracut-install -D DESTROOTDIR [-r SYSROOTDIR] [OPTION]... -m KERNELMODULE [KERNELMODULE …] Install SOURCE (from rootfs or SYSROOTDIR) to DEST in DESTROOTDIR with all needed dependencies. KERNELMODULE can have the format: <absolute path> with a leading / =<kernel subdir>[/<kernel subdir>…] like '=drivers/hid' <module name> ................. Does it matter? Should I just keep using 5.10.10 ? sean

7 14