F30 QEMU migration of a F21 image failed to start
by Robert Moskowitz
First I installed QEMU on F30:
dnf groupinstall "virtualization"
dnf install qemu virt-manager libvirt
systemctl enable libvirtd
systemctl start libvirtd
systemctl enable libvirt-guests
systemctl start libvirt-guests
I backed up my fedora21.qcow2 from my old F28 system and then copied it
to the new F30 system. The target directory on each system is:
/var/lib/libvirt/images
I started QEMU, then went through the steps of migrating an image. This
worked with this F21 image from F21 to F24 and again to F28. This image
has some restricted content data that I work with in this manner.
This time, with F30, the migration failed and kept looping based on what
I saw in the QEMU session via a <Alt-D>.
Anyone working with QEMU with EOL Fedora images?
4 years, 10 months
router usb port problem
by AV
I have a linksys e3200 router and 3 pc's connected:
fed30 desktop, fed30 laptop & Imac with latest macos Mojave.
All connections are ethernet (I don't like wireless).
I also have an Epson inkjet connected by usb cable to Imac.
I can print from Imac: usb + wireless(if I configure wireless)
I can print from desktop: usb (but too much bother switching
cable from Imac to desktop)
I can print from laptop: usb + wireless(if I configure wireless)
The desktop does not have wireless card so can't use that.
(Wireless printing is directly from pc to printer, not via router)
Now the linksys e3200 has a usb port that should be able to handle
compatible disks and printers. If I could could configure this
for the printer I would be able to print from all 3 pc's
without problems as the printer is in the local network.
The problem is I can't get this to work.
First I don't even know if the port is active (i.e. if it works).
I don't have a compatible disk to try if it works with storage.
(It certainly doesn't work with usb sticks).
If I "configure" printing (ipp) with cups after installing Epson
driver I cannot print ("no connection" to printer).
It (an IP address) does not show up in anything I try
(nmap only shows the router and the pc IP's for example).
A check should be able using the 'Cisco connect' software
on the Imac. But the latest version is not accepted by Mojave
even though it should be compatible, so I cannot install it.
Is there any way of finding out if the usb port is working?
If not I will have to buy a wireless dongle for the desktop
and use wireless (even though I would prefer not to).
AV
4 years, 10 months
multiboot USV live
by Patrick Dupre
Hello,
Is there a tool for fedora to create multiboot live on a USB key?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================
4 years, 10 months
Failed to switch root
by Patrick Dupre
Hello,
I have the following issue:
● initrd-switch-root.service - Switch Root
Loaded: loaded (/usr/lib/systemd/system/initrd-switch-root.service; static; vendor preset: enabled)
Active: failed (Result: exit-code) since Tue 2019-06-25 13:49:42 UTC; 5min ago
Process: 838 ExecStart=/usr/bin/systemctl --no-block switch-root /sysroot (code=exited, status=1/FAILURE)
Main PID: 838 (code=exited, status=1/FAILURE)
Jun 25 13:49:42 localhost systemd[1]: Starting Switch Root...
Jun 25 13:49:42 localhost systemctl[838]: Failed to switch root: Specified switch root path '/sysroot' does not seem to be an OS tree. os-release file is missing.
Jun 25 13:49:42 localhost systemd[1]: initrd-switch-root.service: Main process exited, code=exited, status=1/FAILURE
Jun 25 13:49:42 localhost systemd[1]: initrd-switch-root.service: Failed with result 'exit-code'.
Jun 25 13:49:42 localhost systemd[1]: Failed to start Switch Root.
Jun 25 13:49:42 localhost systemd[1]: initrd-switch-root.service: Triggering OnFailure= dependencies.
I though that it was an issue with the /etc/fstab, but I cannot see.
(there is not mtab for example)
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================
4 years, 10 months
Question regarding bash scripting
by sixpack13
hallo
I usallay run vanilla kernels and build them with a suffix "_MY" to save some works when cleaning /boot if that kernels gets outdated and a new one gets installed.
/boot looks like this
ll /boot :
...
-rw-------. 1 root root 20M 22. Jun 15:04 initramfs-5.1.14_MY.img
-rw-r--r--. 1 root root 4,7M 22. Jun 15:04 System.map-5.1.14_MY
-rw-r--r--. 1 root root 15M 22. Jun 15:04 vmlinuz-5.1.14_MY
...
and
ll /boot/loader/ :
drwx------. 2 root root 4,0K 22. Jun 15:04 entries
and
sudo ls -l /boot/loader/entries/ :
-rw-r--r--. 1 root root 242 22. Jun 15:04 0637b2e09df64d90bd0c13dc10d1da70-5.1.14_MY.conf
to clean /boot a use a script:
#!/bin/bash
set -vx;
sudo rm -rf /boot/loader/entries/*MY*;
sudo rm -rf /boot/*MY* /lib/modules/*MY*;
sudo grub2-mkconfig -o /boot/grub2/grub.cfg;
and now my problem:
the first sudo rm -rfv command does NOTHING, means the loader entry is still there and I need to rm it by hand.
whereas the second rm command does what I espect.
What I'm doing wrong / where is the/my bug ?
4 years, 10 months
F30 - No irq handler for vector
by Robert Moskowitz
Lenovo x140e:
At boot up time I see the following messages appear briefly.
Jun 25 09:03:44 lx140e kernel: do_IRQ: 1.55 No irq handler for vector
Jun 25 09:03:44 lx140e kernel: do_IRQ: 2.55 No irq handler for vector
Jun 25 09:03:44 lx140e kernel: do_IRQ: 3.55 No irq handler for vector
Note that the system is not 'seeing' my wifi adapter.
Also I would see one "No irq handler for vector" with F28 on my old
Lenovo x120e.
4 years, 10 months
Russianfedora Repositories.
by Ger van Dijck
Hi all ,
I have a little problem : When updating Fedora 30 ( Yum or Dnfdragora ) I
get the following messages :
Failed to synchronize cache , Ignoring repositories :
Russianfedora /free-updates
/non-free-updates
/free
/non-free
Question : What is wrong and how can I manage to solve this problem ?
Regards ,
Ger van Dijck .
--
Using Opera's mail client: http://www.opera.com/mail/
4 years, 10 months
Cannot boot after 2nd install
by Patrick Dupre
Hello,
I have a fedora which was running fine fine on /dev/sdb (/boot/efi on /dev/sdb1)
Then I install a new fedora 30 on /dev/sda6 (also with /boot/efi on /dev/sdb1)
When I rebooted, the "old" machine did not show up (at grub), then I run
grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
Now "old" machine is recognized at grub, but I get an error at the boot time
I cannot even run a command line (like system*)
Actually, I get
Failed to mount /boot/efi
Should I run:
grub2-install /dev/sda
or
grub2-install /dev/sdb
Also, when booting (before grub), I have
options
/EFI/BOOT/BOOTx64.EFI (this on let be boot on the new install)
/EFI/fedora/grub.cfg
/EFI/fedora/shimx64.efi
Which one should I use preferentially?
Thank
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================
4 years, 10 months
gnome-terminal issue
by Patrick Dupre
Hello,
On one fedora 30 machine, when I run
/usr/bin/gnome-terminal, I get:
the following message:
# _g_io_module_get_default: Found default implementation gvfs (GDaemonVfs) for ‘gio-vfs’
# _g_io_module_get_default: Found default implementation dconf (DConfSettingsBackend) for ‘gsettings-backend’
# watch_fast: "/org/gnome/terminal/legacy/" (establishing: 0, active: 0)
# unwatch_fast: "/org/gnome/terminal/legacy/" (active: 0, establishing: 1)
# watch_established: "/org/gnome/terminal/legacy/" (establishing: 0)
Any Ideas?
Thank
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================
4 years, 10 months