I've got a laptop that has started misbehaving on suspend.
About 1 in 10 suspends the laptop fails to fully suspend. It switches
mostly off (screen off, etc.) but some of the motherboard keeps
running. I know some of the motherboard keeps running because:
- the wifi light remains on
- the laptop will get hot because the fans don't start
The laptop does not respond to the power button to wake up. It's
necessary to force halt & reboot the laptop by holding the power button
down for a few seconds.
9 out of 10 times suspend works fine.
This appears to be a BIOS or kernel issue, since the last entries in
the logs are:
May 29 09:02:17 sieve-deschouwer-co-za systemd: Reached target
May 29 09:02:17 sieve-deschouwer-co-za systemd: Starting Suspend...
May 29 09:02:17 sieve-deschouwer-co-za systemd-sleep: Suspending
May 29 09:02:17 sieve-deschouwer-co-za kernel: PM: suspend entry (deep)
-- Reboot --
On a successful suspend I will additionally get:
May 29 08:21:32 sieve-deschouwer-co-za kernel: PM: Syncing filesystems
This started at the same time as I upgraded to F28. The laptop has
previously worked fine since F24 or F25, or maybe earlier.
It's happened with a few different F28 kernel patchlevels.
product: HP ProBook 450 G2 (L8A81ES#ACQ)
model name : Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI
Linux sieve-deschouwer-co-za 4.16.11-300.fc28.x86_64 #1 SMP Tue May 22
18:29:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Can anyone help me debug before I enter a bugzilla?
I am experiencing a lot of crashes just after logging in into GNOME.
I am using Fedora 28 fully updated and upgraded from 27.
I have already tried to remove all the extensions from .local/share/gnome-shell/extensions
But it still happens.
It does not happens always, but as soon as it happens I have to reboot.
I want to be able to open a crypted device as a non-root user and I
modified the file
in order to do that.
That works, but it is not a good thing to modify a file from the distrib
to create a local configuration.
There is an empty directory /etc/udisks2/modules.conf.d where I tried to
guess what I could put inside for my purpose, but everything failed.
I did not find a clear doc about the udisks2 configuration.
Does anyone knows how to proceed?
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris Cedex 06
Tél. +33 (0)6 7892 5822
It seems today update I lost wifi support, that i used yesterday without
today kernel: 4.16.10-300.fc28.x86_64
yesterday kernel: kernel-4.16.8-300.fc28.x86_64
other possible related packages:
May 24 09:06:07 ope46 NetworkManager: <info> [1527145567.4812]
wifi-nl80211: (wlp3s0): using nl80211 for WiFi device control
May 24 09:06:07 ope46 NetworkManager: <info> [1527145567.4816] device
(wlp3s0): driver supports Access Point (AP) mode
May 24 09:06:07 ope46 NetworkManager: <info> [1527145567.4832]
manager: (wlp3s0): new 802.11 WiFi device
May 24 09:06:07 ope46 NetworkManager: <info> [1527145567.4856] device
(wlp3s0): state change: unmanaged -> unavailable (reason 'managed',
then many of this type:
May 24 09:43:22 ope46 NetworkManager: <info> [1527147802.1365] device
(wlp3s0): set-hw-addr: s
et MAC address to AA:8F:A1:D9:3B:44 (scanning)
May 24 09:43:22 ope46 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is
May 24 09:43:22 ope46 NetworkManager: <info> [1527147802.1659] device
(wlp3s0): supplicant interface state: inactive -> disabled
May 24 09:43:22 ope46 NetworkManager: <info> [1527147802.1662] device
(wlp3s0): supplicant interface state: disabled -> inactive
May 24 09:43:22 ope46 wpa_supplicant: wlp3s0: Reject scan trigger
since one is already pending
In Gnome control center settings, in WIFI section I see
No WI-FI Adapter Found
Make sure you have a WI-FI adapter plugged and turned on
[root@ope46 firmware]# nmcli con up AndroidAP-notepro
Error: Connection activation failed: No suitable device found for this
Any one else?
Google Maps reliably crashes its tab in both Firefox and Google Chrome
on my Radeon-based system (FirePro V4900). The only workaround seem to
be to completely disable WebGL in one or both browsers.
I don't see this on my Intel GPU-based laptop.
Ian Pilcher arequipeno(a)gmail.com
-------- "I grew up before Mark Zuckerberg invented friendship" --------
newegg has a good price on the 512G HP EX920 M.2 ($180US) NVMe SSD
drives this weekend.
I can find no references to this part and Linux. Everything refers to
Windows (and the problems they're having with it).
This is supposed to be the latest, greatest, fastest, blabla, etc.
Anybody familiar with this re: Linux?
F27. I ran a new laptop battery down to 4% (as claimed by gnome) and my
laptop didn't auto-suspend, nor hibernate.
In settings / power, the only option for battery power these days seems to
be to automatically suspend after a set time period; not at a certain
a) did I imagine it that earlier fedoras used to have this feature?
b) any way I can enable auto-suspect on low battery for F27?
Also, a bit off topic, but the Star Tech PEXUSB311AC2
StarTech.com Dual Port USB 3.1 Card – 1x USB-C – 1x USB-A – 10Gbps
per port – Expansion Card – USB 3.1 PCI-E Card – USB 3 PCI
Crashes your file system on large file transfers and crashes your
boot if anything is plugged into it when you boot.
Anyone know of a card that works right? How about Siig?
This is Fedora 28 with Xfce.
I have set power manager to blank and lock the screen after 15 min. This
is a change from the default 10min.
Now the screen is black, but staying on. It is no longer turning off.
What do I need to set so that the screen turns off?