ZFS on linux for fedora
by Edward M
Hello list,
got a question about zfs. Has anybody have used or are usingZFS on
linux <http://zfsonlinux.org/> in Fedora? And
if so, is it possible to delete certain exsiting ext4 filesystems and
create zfs filesystem in there place on the same drive fedora is
installed, or do i need to add an extra drive and go from there creating
zfs filesystem within fedora?
Thanks for tips and ideas:-)
PS: incase the above link does not work it is this:
http://zfsonlinux.org/
11 years, 12 months
Upgrade F15->F16 Dell Inspiron 600m from DVD: no dialog box - Fresh Installation or Upgrade
by Max Pyziur
Greetings,
Hoping to at least be on the trailing edge, I've started an upgrade
process on my Dell Laptop Inspiron 600m.
It is currently running F15, and I'd like to upgrade to F16.
However, after going through the usual preliminaries (select time,
keyboard, language), then Basic Storage devices,
hostname, root password, I'm given a choice to:
Use All Space
Replace Existing Linux
Shrink Current System
Use Free Space
Create Custom Layout
Each one of these indicates that "this option will remove date from the
selected devices. Make sure you have backups"
What happened to "Upgrade an existing system" as seen on this Fedora 16
documentation page:
http://docs.fedoraproject.org/en-US/Fedora/16/html/Installation_Guide/sn-...
Plus all of the other choices:
"Use LVM" (I assume that I don't need this for a basic laptop)
"Encrypt system" (suggestions?)
"Review and modify partitioning layout" (definitely, before everything
gets possibly wiped)
And I have done a full data backup.
Max Pyziur
pyz(a)brama.com
11 years, 12 months
In F16, Atheros AR5008 being restricted to 18mb/s
by JD
$ iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"Private"
Mode:Managed Frequency:2.452 GHz Access Point:
00:AA:BB:CC:DD:EE
Bit Rate=18 Mb/s Tx-Power=27 dBm
Retry long limit:7 RTS thr=2346 B Fragment thr=2346 B
Power Management:off
Link Quality=58/70 Signal level=-52 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:32 Missed beacon:0
I have tried to force 54G, to no avail:
# iwconfig wlan0 rate 54G
# iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"Sean&Anna"
Mode:Managed Frequency:2.452 GHz Access Point:
00:1D:5A:C8:91:C1
Bit Rate=18 Mb/s Tx-Power=27 dBm
Retry long limit:7 RTS thr=2346 B Fragment thr=2346 B
Encryption key:off <<<---- Not true!! Do not know why
iwconfig is saying this.
Power Management:off
Link Quality=57/70 Signal level=-53 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:62 Missed beacon:0
Is the router capable of limiting the rate selectively for some wifi clients
and not others? I have checked 2 other computers on wifi, and they
are at 54G.
11 years, 12 months
create liveCD with fedora-livecd-desktop.ks
by Edward M
Hi,
Iḿ currently trying creating a custom Fedora 16 LiveCD. from Fedoraś
wiki howto called " How to create and use a LiveCD.¨
As order in the wiki, I have installed: livecd-tools, sping-kickstarts
and then changed Selinux permissive mode to 0 and executed the
following command:
livecd-creator \
--config=/usr/share/spin-kickstarts/fedora-livecd-desktop.ks \
--fslabel=Fedora-LiveCD --cache=/var/cache/live
http://fedoraproject.org/wiki/How_to_create_and_use_a_Live_CD
So far everything seems going well, well no errors:-) However the shell
prompt is busy at this point:
138 man subdirectories contained newer manual pages.
3105 manual pages were added.
0 stray cats were added.
0 old database entries were purged.
********************************************************************************************************
since this is my first trying this, iḿ not sure how long this usually
takes on a Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz with
4GB RAM or simply the procedure has gone awol?
thanks!
11 years, 12 months
FC16 date rollback in VM
by Bill Davidsen
I have a VM used for running an old app, using an FC9 image, which is just the
original disk drive image. It was running on FC9 with KVM and ran as long as the
host was up, then FC13, same stability (typically in the 200-600 day range). I
moved it to a nice new FC16 host, and every few days it loses all sense of time
and then craps out in some way and becomes hung solid.
The question is not so much what's wrong as "has anyone else seen this?"
Here's a picture of the final moments, I tried to shut down clean or get debug
info, but a peek at the date and uptime shows that there was a massive clock botch.
http://webster.tmr.com/~davidsen/Date_error_in_VM.png
I'm trying something now, it's been up for 2 days 16 hr, but if this doesn't fix
I'll have to seriously debug and would like to know if it's a unique problem or
known.
--
Bill Davidsen<davidsen(a)tmr.com>
We are not out of the woods yet, but we know the direction and have
taken the first step. The steps are many, but finite in number, and if
we persevere we will reach our destination. -me, 2010
11 years, 12 months
Hi, I need help about error at external HDD 1 TB at FC6
by Roberto Escobar Suárez
Well just a month ago, I used ntfs-3g and fuse to work with an external HDD on Fedora Core 6, a few days ago system cannot save files on my external HDD, I unmount HDD, and restart and it was the solution, but now I can't create directories, the message is:
mkdir: no se puede crear el directorio /media/mount_point_i_believe/directory/directory_to_create error de entrada/salida
I typed the command : dmesg at terminal
and this is the result:
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1536 bytes
Time: 12:41:05 Date: 04/22/112
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C100._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C110._PRT]
ACPI: PCI Interrupt Link [C10C] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10F] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C11D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C11E] (IRQs 10 11) *0, disabled.
ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
ACPI: Power Resource [C1FE] (on)
ACPI: Power Resource [C206] (on)
ACPI: Power Resource [C2EE] (off)
ACPI: Power Resource [C2EF] (off)
ACPI: Power Resource [C2F0] (off)
ACPI: Power Resource [C2F1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x5f7fffff could not be reserved
pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f0000000-f00fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 60000000-63ffffff
MEM window: 64000000-67ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: f0100000-f03fffff
PREFETCH window: 60000000-63ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1506k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1337690465.381:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key CAA333178AF1EC5F
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Transitioning device [C2F2] to D3
ACPI: Transitioning device [C2F2] to D3
ACPI: Fan [C2F2] (off)
ACPI: Transitioning device [C2F3] to D3
ACPI: Transitioning device [C2F3] to D3
ACPI: Fan [C2F3] (off)
ACPI: Transitioning device [C2F4] to D3
ACPI: Transitioning device [C2F4] to D3
ACPI: Fan [C2F4] (off)
ACPI: Transitioning device [C2F5] to D3
ACPI: Transitioning device [C2F5] to D3
ACPI: Fan [C2F5] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZ0] (31 C)
ACPI: Thermal Zone [TZ1] (31 C)
ACPI: Thermal Zone [TZ2] (21 C)
ACPI: Thermal Zone [TZ3] (20 C)
ACPI: Thermal Zone [TZ4] (75 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3040-0x3047, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
Clocksource tsc unstable (delta = -165098218 ns)
hda: HL-DT-ST DVDRAM GSA-T40N, ATAPI CD/DVD-ROM drive
hda: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30d5]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01be1b32, devctl 0x44
Yenta: ISA IRQ mask 0x04f8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf03fffff
pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
PNP: PS/2 Controller [PNP0303:C1FB,PNP0f13:C1FC] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 12:52:684
hash matches device full
Freeing unused kernel memory: 268k freed
Write protecting the kernel read-only data: 925k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00003020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0584000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 20
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf881e100 ctl 0x00000000 bmdma 0x00000000 irq 20
ata2: SATA max UDMA/133 cmd 0xf881e180 ctl 0x00000000 bmdma 0x00000000 irq 20
ata3: SATA max UDMA/133 cmd 0xf881e200 ctl 0x00000000 bmdma 0x00000000 irq 20
ata4: SATA max UDMA/133 cmd 0xf881e280 ctl 0x00000000 bmdma 0x00000000 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD1200BEVS-60UST0, 01.01A01, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1337690471.509:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
security: 61 classes, 58427 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda9, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1337690471.802:3): policy loaded auid=4294967295
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
intel_rng: FWH not detected
cs: IO port probe 0xa00-0xaff: clean.
e100: eth0: e100_probe: addr 0xf0101000, irq 19, MAC addr 00:1E:EC:1C:C7:26
Floppy drive(s): fd0 is 1.44M
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ACPI: AC Adapter [C1AB] (off-line)
ACPI: Battery Slot [C1AC] (battery present)
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [C20B]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C20C]
ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel(a)redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda9, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda7, type ext3), uses xattr
Adding 10482372k swap on /dev/sda8. Priority:-1 extents:1 across:10482372k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
i2c /dev entries driver
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
mtrr: no more MTRRs available
mtrr: no more MTRRs available
usb 1-1.1: new full speed USB device using uhci_hcd and address 3
usb 1-1.1: not running at top speed; connect to a high speed hub
usb 1-1.1: configuration #1 chosen from 1 choice
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.1.3: new full speed USB device using uhci_hcd and address 4
usb 1-1.1.3: not running at top speed; connect to a high speed hub
usb 1-1.1.3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.1.4: new full speed USB device using uhci_hcd and address 5
usb 1-1.1.4: not running at top speed; connect to a high speed hub
usb 1-1.1.4: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg2 type 0
scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg3 type 0
scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg4 type 0
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access ST310005 28AS PQ: 0 ANSI: 2 CCS
sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 38 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 38 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
fuse init (API version 7.8)
SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
usb 1-1.1.4: USB disconnect, address 5
hub 1-1.1:1.0: hub_port_status failed (err = -71)
hub 1-1.1:1.0: connect-debounce failed, port 4 disabled
hub 1-1.1:1.0: cannot disable port 4 (err = -71)
usb 1-1.1: USB disconnect, address 3
usb 1-1.1.3: USB disconnect, address 4
usb 1-1.1: new full speed USB device using uhci_hcd and address 6
usb 1-1.1: not running at top speed; connect to a high speed hub
usb 1-1.1: configuration #1 chosen from 1 choice
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.1.3: new full speed USB device using uhci_hcd and address 7
usb 1-1.1.3: not running at top speed; connect to a high speed hub
usb 1-1.1.3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg1 type 0
scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg2 type 0
scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg3 type 0
scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg4 type 0
usb-storage: device scan complete
usb 1-1.1.4: new full speed USB device using uhci_hcd and address 8
usb 1-1.1.4: not running at top speed; connect to a high speed hub
usb 1-1.1.4: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
scsi 7:0:0:0: Direct-Access ST310005 28AS PQ: 0 ANSI: 2 CCS
sd 7:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 38 00 00
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sd 7:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 38 00 00
sd 7:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 7:0:0:0: [sdg] Attached SCSI disk
sd 7:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 122095175
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 122095175
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786431
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786431
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786433
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 122095175
scsi 5:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdf1, logical block 786431
This is just I could copy from Terminal, I don't know if it could be full info, for your attention, thanks so much :)
11 years, 12 months
dbus[689]: [system] Rejected send message
by Reindl Harald
what are this messages in /var/log/messages?
they are quite new and happening each time a user logs out from
afpd and all is working fine......
systemd-37-20.fc16.x86_64
May 22 22:03:43 fileserver dbus[689]: [system] Rejected send message, 2 matched rules; type="method_call",
sender=":1.25" (uid=1037 pid=1220 comm="/usr/sbin/afpd -P /var/run/netatalk.pid -F /etc/ne")
interface="org.freedesktop.login1.Manager" member="ReleaseSession" error name="(unset)" requested_reply="0"
destination="org.freedesktop.login1" (uid=0 pid=665 comm="/lib/systemd/systemd-logind ")
May 22 22:03:43 fileserver dbus-daemon[689]: dbus[689]: [system] Rejected send message, 2 matched rules;
type="method_call", sender=":1.25" (uid=1037 pid=1220 comm="/usr/sbin/afpd -P /var/run/netatalk.pid -F /etc/ne")
interface="org.freedesktop.login1.Manager" member="ReleaseSession" error name="(unset)" requested_reply="0"
destination="org.freedesktop.login1" (uid=0 pid=665 comm="/lib/systemd/systemd-logind "
11 years, 12 months
Upgrading F14->F15 on x64 - system freezes during cleanup
by Max Pyziur
Greeting,
I'm upgrading from F14 to F15 on an x64 system. (I've been doing so
successfully since 2007).
However, on this go-around the screen went blank during "clean-up" and the
mouse became unresponsive.
Any suggestions would be appreciated.
Thanks.
Max Pyziur
pyz(a)brama.com
11 years, 12 months
Re: create liveCD with fedora-livecd-desktop.ks
by Edward M
Thanks for the replys:-)
Creating the LiveCD by executing the following command;
livecd-creator \
--config=/usr/share/spin-kickstarts/fedora-livecd-desktop.ks \
--fslabel=Fedora-LiveCD --cache=/var/cache/live
issued the following warning, however the LiveCD creation procdeure
continued:
the mountpoint / has already been defined.
warnings.warn(_("A partition with the mountpoint %s has already been
defined.") % pd.mountpoint)
After the 1135 packages were installed, I think from cache, the
procdeure failed with the following error:
********************************************************************************************************
Error creating Live CD : fsck after resize returned an error (1)!
umount: /var/tmp/imgcreate-4prhcu/install_root/sys/fs/selinux/load: not
found
Do I need to make changes to the base file or simply is a bug?
Iḿ using
http://fedoraproject.org/wiki/How_to_create_and_use_a_Live_CD
11 years, 12 months
Fedora 16 rhythmbox keeps freezing
by Neil Bird
Since upgrading to F16 from F14, both my wife and I have found rhythmbox
freezing after 3 or so songs, and it needs to be force-killed.
Any thoughts?
What may be relevant is that I have seen (at least for me, not
necessarily my wife) a spew of the following sort of error logged in
messages (once every few seconds):
pulseaudio[9075]: protocol-native.c: Denied access to client with
invalid authorization data.
.. which I can only stop by killing the referenced process. I don't know
what kicks it off, I can go for days without it (w.g, listening to streaming
radio via Firefox). it's only rhythmbox that seems to have a big issue.
--
[neil@fnx ~]# rm -f .signature
[neil@fnx ~]# ls -l .signature
ls: .signature: No such file or directory
[neil@fnx ~]# exit
11 years, 12 months