Thunderbird issue
by Paolo Galtieri
I was trying to read my email this AM using TB, but it had hung up. So I
killed it by clicking on the end process button and selecting the force
quit. When I tried to restart TB it's hung up again. Nothing is displayed,
but doing a ps shows 3 processes.
[pgaltieri@peglaptop ~]$ ps axlw | grep thunderbird
0 500 472 1 20 0 105584 1220 wait S ? 0:00 /bin/sh
/usr/lib64/thunderbird-3.0/thunderbird
0 500 476 472 20 0 105584 1308 wait S ? 0:00 /bin/sh
/usr/lib64/thunderbird-3.0/run-mozilla.sh
/usr/lib64/thunderbird-3.0/thunderbird-bin
0 500 480 476 20 0 593124 82292 sock_a Sl ? 0:02
/usr/lib64/thunderbird-3.0/thunderbird-bin
0 500 653 601 20 0 102732 784 - R+ pts/13 0:00 grep
thunderbird
If I run strace on the third of these I get:
[pgaltieri@peglaptop ~]$ strace -f -p 480
Process 480 attached with 6 threads - interrupt to quit
[pid 486] futex(0x7ff08878954c, FUTEX_WAIT_PRIVATE, 19, NULL <unfinished
...>
[pid 480] write(46,
"\373\377\377\377\3\0\10\0\f\0\21\0\24\0\25\0\25\0\24\0\22\0\20\0\16\0\f\0\v\0\n\0"...,
9254 <unfinished ...>
[pid 481] restart_syscall(<... resuming interrupted call ...> <unfinished
...>
[pid 482] restart_syscall(<... resuming interrupted call ...> <unfinished
...>
[pid 483] restart_syscall(<... resuming interrupted call ...> <unfinished
...>
[pid 485] futex(0x7ff08c65884c, FUTEX_WAIT_PRIVATE, 5, NULL <unfinished
...>
[pid 482] <... restart_syscall resumed> ) = -1 ETIMEDOUT (Connection timed
out)
[pid 482] futex(0x7ff092e27ab0, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 482] futex(0x7ff09a38a18c,
FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 819, {1265046952,
423989000}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
[pid 482] futex(0x7ff092e27ab0, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 482] futex(0x7ff09a38a18c,
FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 821, {1265046953,
424132000}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
[pid 482] futex(0x7ff092e27ab0, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 482] futex(0x7ff09a38a18c,
FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 823, {1265046954,
424284000}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
[pid 482] futex(0x7ff092e27ab0, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 482] futex(0x7ff09a38a18c,
FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 825, {1265046955,
424430000}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
[pid 482] futex(0x7ff092e27ab0, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 482] futex(0x7ff09a38a18c,
FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 827, {1265046956,
424573000}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
[pid 482] futex(0x7ff092e27ab0, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 482] futex(0x7ff09a38a18c,
FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 829, {1265046957,
424721000}, ffffffff^C <unfinished ...>
Process 480 detached
Process 481 detached
Process 482 detached
Process 483 detached
Process 485 detached
Process 486 detached
After 10 minutes TB still has not displayed my email. I've tried killing
and restarting thunderbird, but the same thing happens. I've not yet tried
rebooting, but it seems strange that TB can get into a state that requires a
reboot to correct.
Paolo
14 years, 1 month
Serial port (/dev/ttySX) question.
by Gene Heskett
Greetings all;
rs-232 tech is getting old, like me.
Do we have a tool that can display graphically in near real time, the status
of the commonly used wires/signals in the '7 wire' protocol?
I need something that works a bit like the old db25 tester with a bunch of
LED's to tally the line states like that gismo Radio Shack sold 20 years ago.
Those blinking leds were a very good troubleshooting tool, and I'm having
flow control problems that look like a system freeze on one end or the other,
but when rz times out, I still get a prompt from the shell on the other end,
but nothing I type here arrives there, like hardware flow is still in effect
and turned off on one end or the other.
Thanks All for any hints.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
There's no future in time travel.
14 years, 1 month
A question about Places->Network
by Aaron Konstam
I asked before but I did not get a definite response, so here goes the
question again.
Under Gnome or Nautilus does any one when executing Places->Network see
the other Linux machines on the LAN? This worked in F11 but not in F12.
Does anyone know why this change in behavior has occurred?
--
=======================================================================
OS swapped to disk
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam(a)sbcglobal.net
14 years, 1 month
CUPS:PDF - localhost:631 configuration
by JayLinux
I would like to be able to configure CUPS-PDF (at
http://localhost:631/printers/Cups-PDF) so that I can choose the
location to save the PDF file (presently it saves all printed files to
desktop by default).
Adding my user name to the sys row of /etc/group enabled me to modify
the settings at the above page, but there was no option to modify
output location to save the PDF file.
Any suggestions for the above problem ?
Thanks,
Jay
--
Linux User 483705 @ http://counter.li.org/ (Linux Counter)
14 years, 1 month
How do I put Multiple live distro's on a USB flash drive.
by tux
I have an 8GB flash drive that I would like to put multiple Fedora Live
CD's on. (KDE,Gnome,LXDE,XFCE, FEL, Games and Edu,Third party spins, etc. )
Does anyone have any advice on how to do this?
Can I put 32 bit and 64 bit live cd's on the same flash drive and choose
between them?
Thank you,
Tux
14 years, 1 month
Re: Howto lock in Resolution in Xorg.conf
by Marko Vojinovic
On Friday 29 January 2010 18:04:22 you wrote:
> On 01/28/2010 07:09 PM, Marko Vojinovic wrote:
> > On Thursday 28 January 2010 18:36:43 Jim wrote:
> >> Noveau is not changing the xorg.conf, it is hal or something like that
> >> in Fedora.
> >
> > Nothing should be changing xorg.conf just out of the blue. And the
> > settings in there should be honored by X.
> >
> > Couple of stupid questions: are you sure that you have saved your changes
> > to the file after editing? Are you sure you are editing the right file?
> >
> > Maybe it is a ownership/permissions problem. Post the output of
> >
> > ls -l /etc/X11/xorg.conf
> >
> > Also, maybe there is some error in the file itself, and X falls back to
> > autoconfiguring. Post the output of
> >
> > cat /etc/X11/xorg.conf
> >
> > Maybe for some odd reason the xorg.conf file is not being used at all.
> > Post the output of
> >
> > cat /var/log/Xorg.0.log
> >
> > With all this info I guess we'll have a better idea on what is going on.
>
> $ ls -l /etc/X11/xorg.conf
> -rw-r--r--. 1 root root 1451 2010-01-28 12:22 /etc/X11/xorg.conf
Ok, the permissions look fine.
> [tom@gray ~]$ cat /etc/X11/xorg.conf
> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> # nvidia-xconfig: version 1.0 (mockbuild@) Sun Nov 22 21:04:19 EST 2009
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0"
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> EndSection
>
> Section "Files"
> FontPath "/usr/share/fonts/default/Type1"
> EndSection
>
> Section "InputDevice"
> # generated from default
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> # generated from data in "/etc/sysconfig/keyboard"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbLayout" "us"
> Option "XkbModel" "pc105"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "Unknown"
> HorizSync 28.0 - 33.0
> VertRefresh 43.0 - 72.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
Ok, in this place here you need to add the line:
Modes "1024x768"
> EndSubSection
> EndSection
Add it in precisely the above place (inside the "Display" subsection), save
the xorg.conf file and do a "cat /etc/X11/xorg.conf" again to make sure that
the added line is now really there.
Given that only root has permissions to write to the file, only a very limited
number of programs will be able to rewrite it. This will reduce the number of
possible suspects. :-)
Next, log out and log back in, *without* rebooting the computer. This will
restart only X and nothing else, and now the resolution should be 1024x768.
See below how to check. If it isn't, do a "cat /etc/X11/xorg.conf" to verify
that the "Modes" line is still there.
If this went well, do a full reboot and see if the new resolution sticks.
Check the "cat /etc..." thing again to see if anything has mangled the
xorg.conf.
Report your findings back to us. :-)
> [tom@gray ~]$ cat /var/log/Xorg.0.log
>
> X.Org X Server 1.7.4
> Release Date: 2010-01-08
> X Protocol Version 11, Revision 0
> Build Operating System: x86-01 2.6.18-164.6.1.el5
> Current Operating System: Linux gray 2.6.31.12-174.2.3.fc12.x86_64 #1
[I'm snipping irrelevant parts throughout the log]
> (==) Using config file: "/etc/X11/xorg.conf"
This is ok, X actually uses xorg.conf.
> (==) Jan 28 16:58:57 NVIDIA(0): No modes were requested; the default
> mode "nvidia-auto-select"
> (==) Jan 28 16:58:57 NVIDIA(0): will be used as the requested mode.
There was no "Modes" line in xorg.conf, so nvidia driver used the default
auto-select option to choose your resolution.
> (II) Jan 28 16:58:57 NVIDIA(0): Virtual screen size determined to be
> 1600 x 900
> (--) Jan 28 16:58:57 NVIDIA(0): DPI set to (92, 91); computed from
> "UseEdidDpi" X config
> (--) Jan 28 16:58:57 NVIDIA(0): option
[snip]
> (II) Jan 28 16:59:57 NVIDIA(0): Setting mode "1152x864"
This is the resolution it chose, using the EDID data sent from the monitor. I
guess it picked the largest resolution available.
So, once you edit the /etc/X11/xorg.conf, add the "Modes" line, log out/in,
you can check the actual resolution used by (a) visual inspection of the
monitor, and (b) by reading the log and checking for the info like the above.
Somewhere you should be able to find the line that contains something like
NVIDIA(0): Setting mode "1024x768"
If you find this in the log, then it definitely works as expected.
Do a "cat /var/log/Xorg.0.log" again, and read it through, or post it again
here.
HTH, :-)
Marko
14 years, 1 month
Fedora 12 Brother QL-560 (P-touch) Label Printer?
by Frank Murphy
Hi,
When plugged in it knows what it is,
but cannot find a driver for it.
foomatic-4.0.3-8.fc12.x86_64
ptouch-driver-1.3-2.fc12.x86_64
Any advice, Google sends me to Windows sites.
--
Regards,
Frank Murphy
UTF_8 Encoded
14 years, 1 month
Fedora 12 update problem
by Taoufik GABSI
I just installed fedora 12 as an update of a fedore 11 system.
This morning I saw 683 updates proposed for my system.
I clicked on "Install Updates" button and had, some seconds after this
message:
______________________________________
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not
found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in
<module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710,
in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657,
in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in
update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in
_is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
________________________________________
Any help?
___________________________________________
Cordialement / Best Regards
Taoufik GABSI
Géophysique Spatiale et Planétaire
Institut de Physique du Globe de Paris
4, avenue de Neptune - 94107 SAINT MAUR cedex - FRANCE
gabsi(a)ipgp.fr
Tel +33 (0)1 45 11 41 49
Fax +33 (0)1 45 11 41 10
14 years, 1 month
Login user name list - modifiy?
by KC8LDO
Here is a bit of a different question I think. I have an F-11 box I'm
setting up to let people access it for some file shares using samba. In
order to control the access I created a user for each person I want to allow
access. Each user was created without their own group or an account, file in
"/home", since none of them will be allowed to do anything except access
file shares. The above users were then assigned to several groups I created.
The problem is every one of the users I created shows up as an entry in the
main login screen on the locally attached display console. Is there anyway
to only display logins for those uses that have an account they can access
while not showing the others? Those that have an account will be accessing
their account by loging in, by attaching remotely, using Xrdp which by the
way is a slick way of handling multiple users on the machine at the same
time and letting them use their desktop.
Regards;
Leland C. Scott
KC8LDO
14 years, 1 month