ath5k phy0: gain calibration timeout (2417MHz) lose connection
by Antonio Olivares
Dear fellow fedora users,
I have a machine with a supported Dlink wireless card, but it is not working properly. IT connects for a little while and then the connection gets dropped:
03:06.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
can't and could not send smolt profile:
[olivares@localhost Download]$ cd ~
[olivares@localhost ~]$ smoltSendProfile
Unable to save UUID, continuing...
Traceback (most recent call last):
File "/usr/bin/smoltSendProfile", line 35, in <module>
from scan import scan, rating
File "/usr/share/smolt/client/scan.py", line 30, in <module>
h = smolt.Hardware()
File "/usr/share/smolt/client/smolt.py", line 359, in __init__
self.devices[udi] = Device(props)
File "/usr/share/smolt/client/smolt.py", line 134, in __init__
self.UUID = getUUID()
File "/usr/share/smolt/client/smolt.py", line 1015, in getUUID
sys.err.write(_('Your UUID file could not be created: %s\n' % e))
AttributeError: 'module' object has no attribute 'err'
wlan0: authenticate with AP 00:1c:58:05:e8:b0
wlan0: authenticated
wlan0: associate with AP 00:1c:58:05:e8:b0
wlan0: RX AssocResp from 00:1c:58:05:e8:b0 (capab=0x431 status=0 aid=78)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: authenticate with AP 00:1c:58:05:e7:a0
wlan0: authenticated
wlan0: associate with AP 00:1c:58:05:e7:a0
wlan0: RX ReassocResp from 00:1c:58:05:e7:a0 (capab=0x431 status=0 aid=42)
wlan0: associated
wlan0: authenticate with AP 00:1c:58:05:e8:b0
wlan0: deauthenticated
wlan0: authenticated
wlan0: associate with AP 00:1c:58:05:e8:b0
wlan0: RX ReassocResp from 00:1c:58:05:e8:b0 (capab=0x431 status=0 aid=79)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1c:58:05:e8:b0
wlan0: authenticated
wlan0: associate with AP 00:1c:58:05:e8:b0
wlan0: RX ReassocResp from 00:1c:58:05:e8:b0 (capab=0x431 status=0 aid=80)
wlan0: associated
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to restore operational channel after scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: authenticate with AP 00:1c:58:05:e8:b0
wlan0: authenticate with AP 00:1c:58:05:e8:b0
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: can't reset hardware (-11)
wlan0: Failed to config new BSSID to the low-level driver
wlan0: authenticate with AP 00:1c:58:05:e8:b0
wlan0: authentication with AP 00:1c:58:05:e8:b0 timed out
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 14 callbacks suppressed
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: can't reset hardware (-11)
wlan0: Failed to config new SSID to the low-level driver
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
wlan0: failed to set freq to 2427 MHz for scan
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
__ratelimit: 13 callbacks suppressed
ath5k phy0: gain calibration timeout (2462MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2462 Mhz)
wlan0: failed to set freq to 2462 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to restore operational channel after scan
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 14 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration timeout (2432MHz)
ath5k phy0: gain calibration timeout (2432MHz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 14 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 14 callbacks suppressed
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 15 callbacks suppressed
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
r8169: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ath5k phy0: noise floor calibration timeout (2422MHz)
eth0: no IPv6 routers present
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: gain calibration timeout (2412MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: gain calibration timeout (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: gain calibration timeout (2422MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: gain calibration timeout (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: gain calibration timeout (2432MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
ath5k phy0: gain calibration timeout (2437MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2437 Mhz)
wlan0: failed to set freq to 2437 MHz for scan
ath5k phy0: gain calibration timeout (2442MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2442 Mhz)
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to restore operational channel after scan
__ratelimit: 11 callbacks suppressed
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
[root@localhost ~]#
Despite that fedora is my favorite OS, I have to "not run it" because it drops my connection and I have to run Windows on it so that I can actually do work. I lost one of my Fedora Rawhide Machines on which I did my normal work and I need a dependable machine so I can do my normal work. What should I do? I patiently await a 2.6.29 kernel for this machine and I can compile in case it takes to long to get here :), on rawhide still with -0.258.2?? kernel not yet 2.6.29 :)
Are there any bugs out there?
I have a laptop that also uses the ath(5)(9)k drivers and it does not drop the connects and I run rawhide on it. Please advice me as to what to do.
Thanks in Advance,
Antonio
15 years, 2 months
HDMI sound, Nvidia drivers and the ALSA drivers
by Geoffrey Leach
There have been a number of questions about this over the last
months,
so I thought I'd post a summary of my results.
The short answer: the latest kernel, 2.6.27.15-170.2.24.fc10, provides
the 1.0.17 ALSA drivers. For the snd_hda_intel driver at least, that's
not sufficient. The solution is to get the latest (1.0.19) driver from
the ALSA site, compile and install. You don't need full kernel sources
to do this; the kernel-devel module is enough.
FWIW, here's the relevant info on the hardware.
MB: ASUS P5N7A-VM
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
info.product = 'ALC888 Digital ALSA Playback Device'
15 years, 2 months
Missing Hardware
by Gene Poole
I'm running Fedora 9 on a custom AMD Phenom Quad-Core with 8GB RAM
installed, 2-SATA hard drives (Seagate 500GB and Seagate 1TB); HP DVD/CD
RW Dual Layer with Lightscribe.
Lo and behold, I've updated my running (this machine) from kernel
2.6.25-14 to kernel 2.6.27.19-78.2.30 (?) and have experienced the
following:
1. My dual-layer DVD/RW and CD/RW drive has disappeared (it was /dev/sr0)
The only messages I see that appear to be of concern are:
[root@jpdsys3 log]# cat messages | grep -i reset | more
Mar 22 14:46:30 jpdsys3 kernel: ata1: softreset failed (device not ready)
Mar 22 14:46:30 jpdsys3 kernel: ata2: softreset failed (device not ready)
Mar 22 14:53:55 jpdsys3 kernel: ata1: softreset failed (device not ready)
Mar 22 14:53:55 jpdsys3 kernel: ata2: softreset failed (device not ready)
All of the devices are SATA except the DVD drive.
How can I get /dev/sr0 back?
TIA,
Gene
15 years, 2 months
Re: Missing Hardware After Update
by Gene Poole
I will file the bug report, but in the meantime what about the following:
Where can I find and how can I script the process that works under the old
kernel?
Once scripted, can I include it in rc.local?
If #1 and #2 can be accomplished, how will this effect future kernel
upgrades? In other words, the devices are configured at the beginning of
the boot process, but I want to do it at the end of the boot process?
Or can I use the MAKEDEV command and what should the parameters be?
Thanks,
Gene
15 years, 2 months
konsole trouble
by Robert Singleton
I'm running Fedora 10 under the Gnome desktop on a Toshiba laptop. Last
night I seem to have messed up the konsole application (not sure how,
but I think it turned dark, wouldn't respond, so I killed the app), and
now it will not launch (although Terminal will launch, but I don't
really like Terminal). The problem is also present with other user
accounts, so it doesn't seem like it's a local profile setting. The
Microsoft fix of rebooting does not solve the problem either. Any
suggestions? Thanks very much in advance if you can help me.
Robert Singleton
15 years, 2 months
Firefox addons for later
by Mick M.
Hi;
I am putting a bunch of files on a USB stick.
I have the latest firefox rpm and want to include some addons.
The ones I use are addblock-plus, videodownloadhelper, noscript, downthemall and WOT.
I know I can just install ff and then manually install them via the web.
But how do I include them on the stick?
I would like to be able to install ff then locally install the addons, before going on the net.
thanks
Mick M.
15 years, 2 months
VCD
by Patrick Dupre
Hello,
I have a CD video that I can watch on XP, but with fedora, it never works,
I tried: vlc, mplayer, gnomeplayer, movieplayer, gxine.
Typically, I get: failed to open vcd://2
or:
libdvdnav: Unable to find map file '/home/pdupre/.dvdnav.map'
libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
[00000441] main access error: no access module matched "dvd"
[00000439] main input error: open of `dvd:///dev/sr0' failed: could not
create access: no access module matched "dvd"
[00000446] main stream error: cannot pre fill buffer
[00000493] pulse audio output: No. of Audio Channels: 2
[00000532] vcd access error: no movie tracks found
[00000530] main input error: open of `vcd:///dev/sr0' failed: could not
create access
or:
No plugin found to handle this resource (vcd://)
Any idea ?
Thank
--
---
==========================================================================
Patrick DUPRÉ | |
Department of Chemistry | | Phone: (44)-(0)-1904-434384
The University of York | | Fax: (44)-(0)-1904-432516
Heslington | |
York YO10 5DD United Kingdom | | email: pd520(a)york.ac.uk
==========================================================================
15 years, 2 months
computer freezes, disks spin, unhappiness abounds
by Dr. Michael J. Chudobiak
Hi all,
I have a bunch of HP DC7700, DC7800, and DC7900 computers running F10.
The DC7700s are having trouble - they keep freezing up. The hard disk
seems to go to constant activity, and everything else freezes up. Mouse
movement works for a while (but clicks are ineffective), but then it too
freezes up.
The logs provide no useful info, and I can't log in during the freeze.
Has anyone seen anything similar, or have suggestions for debugging?
This started a few weeks ago. The DC7800s and DC7900s are fine, which
suggests some weird hardware-specific kernel issue with the older DC7700s.
- Mike
15 years, 2 months
How do I add ntp servers??
by Beartooth
I'd've sworn I'd posted this yesterday, but I don't see it; my
apologies if it's a re-run.
The ntpserver I used to use, ntp.vt.edu, is gone; it has been
replaced by ntp-x.vt.edu, for x = 1 - 4.
Afaict, F10 uses Redhat's servers and only Redhat's ntpservers;
and the comment at the head of /etc/ntp/ntpservers says :
> #This file contains a list of ntp servers to show in the system-config-
> date user interface.
> #It is not recommended that you modify this file by hand.
I *think* that just means that the proper way to modify it is to
run system-config-date as root, and make the changes that way. I did; but
I see no change in /etc/ntp/ntpservers. Do I have to log out and back in,
or what?
Or is there some reason those of us with closer ntpservers should
nevertheless use Redhat and Redhat only??
--
Beartooth Staffwright, PhD, Neo-Redneck Linux Convert
Remember I know precious little of what I am talking about.
15 years, 2 months
Virtual Memory gone mad
by Jonathan Ryshpan
Investigating why my computer had suddenly become very s.l.o.w, I
noticed that virtual memory usage had become very large. Following is
an extract from a "$ ps axuw" for the system sorted according to VM
usage, the top 20 processes in VM usage. Does anyone know why evolution
+ evolution evolution-data-server use not quite 2 GBytes? Or why the
ordinary applets use together 1.4 GBytes? Or why sealert uses about 0.5
GBytes? Or anything else on this list?
PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
2656 1.2 5.2 1668576 53708 ? Sl 12:20 1:26 evolution
2662 0.0 0.2 444628 2680 ? S 12:20 0:00 /usr/bin/python -E /usr/bin/sealert -s
2611 0.0 0.5 381732 6132 ? S 12:20 0:02 nautilus --no-desktop --browser
2660 3.4 2.4 354252 25396 ? Sl 12:20 3:51 /usr/lib/firefox-3.0.7/firefox
2887 0.0 0.2 339324 2280 ? Sl 12:21 0:00 /usr/libexec/evolution/2.24/evolution-alarm-notify ...
2642 0.0 0.5 331800 6080 ? Sl 12:20 0:02 gnome-terminal --geometry=90x30
1918 0.0 0.2 327812 2388 ? Ssl 12:09 0:02 /usr/bin/python -E /usr/sbin/setroubleshootd
2929 0.0 0.2 320556 2672 ? Sl 12:22 0:01 mono /usr/lib64/tomboy/Tomboy.exe --panel-applet ...
2827 0.0 0.2 313216 2804 ? Sl 12:21 0:00 /usr/libexec/evolution-data-server-2.24 ...
2909 0.0 0.3 288000 3708 ? S 12:21 0:00 /usr/libexec/clock-applet ...
2922 0.0 0.2 287036 2812 ? Sl 12:22 0:00 /usr/libexec/mixer_applet2 ...
2600 0.0 0.2 281228 3000 ? Ssl 12:20 0:00 /usr/libexec/gnome-settings-daemon
3769 0.0 0.3 276596 3604 ? S 12:31 0:00 /usr/libexec/notification-daemon
2665 0.0 0.3 262356 3392 ? S 12:20 0:00 mail-notification --sm-disable
2768 0.0 0.6 257552 6368 ? S 12:21 0:05 /usr/libexec/wnck-applet ...
2608 0.0 0.5 256040 5848 ? S 12:20 0:02 gnome-panel
5596 9.1 0.9 254712 9548 ? Sl 14:04 0:54 gnome-system-monitor
2673 0.0 0.2 241080 2680 ? S 12:20 0:00 gnome-power-manager
2776 0.0 0.3 240844 3544 ? S 12:21 0:00 /usr/libexec/trashapplet ...
2609 0.1 0.1 237652 1660 ? Ss 12:20 0:12 gnome-screensaver
For an old-line embedded systems programmer, who used to think in terms
of KBytes, this looks a little excessive.
Thanks - jon
15 years, 2 months