Alexander Dalloz wrote:
Am Mo, den 06.09.2004 schrieb Hans Christian Studt um 20:29:
I am trying to set up a FC2 PC (tux1700) as a gateway to the internet via my modem ppp0 and another FC2 PC (tux) that will use the gateway through eth0.
At the moment this does not work and I don't know if the problem is the gateway or the other PC or both.
Gateway PC
Settings are ok.
Other PC
Looks ok too, though ip_forward is not necessary here on the NATed client.
Check your network settings on the client. The NAT router has to be the gateway and you have to be sure to have set valid DNS entries in /etc/resolv.conf.
Yes - after copying /etc/resolv.conf from the gateway it now works.
Thanks.
Mvh Hans Christian Studt Private +45 48 79 79 89 Mobile +45 29 23 54 14 Business +45 36 14 54 14 mailto:hc@studt.dk http://hc.studt.dk Powered by Linux 2.6.8-1.521