On 5/1/05, Erik Hemdal ehemdal@townisp.com wrote:
On Sun, 2005-05-01 at 11:15 -0500, Gustavo Seabra wrote:
Hi,
I have to give a seminar using OO.o Impress / FC3, in a Dell Inspiron 8600 laptop. I wonder if anyone could give me a hint on how to make it work with a projector.
Thanks,
I have an Inspiron 5000.
To get it to work for me with nothing else required, I simply booted with the projector attached and powered on. It "just worked".
Also, to switch between video and LCD there is a function key on the Dell that does that.
Don't plug in the projector until the laptop is booted up completely. Most projectors wake up in either 640x480 or 800x600 resolution, and FC will accept that as the projector's resolution, and will give you an awful "viewport" behavior.
If you wait for the system to boot (and have X running), then the projector will get whacked into the system's resolution and do what you want.
On my Dell laptops, Fn-F8 (look for the blue keycap legends) cycles through the projector modes. Look for three: 1) no projector output, 2) Projector but no LCD screen ouput, 3) Both LCD and projector display.
Test this first. OOffice sometimes does unusual things with slide displays, although it generally does very well.
Erik
Hi erik,
I just tried. I can get either laptop scrrn or projector, never both. And when I'm using the projector, I can't make the whole screen appears, it's always "cut" at the left. Can it be because the laptop has a widescreen?