Cam wrote:
Dave
Does anyone know how I can get my wireless up and running?
You could try:
remove wireless card use system-config-network to remove the configuration for the card make sure there are no alias lines for your card in /etc/modprobe.conf reboot with wireless card out to ensure it's modules are not loaded insert wireless card configure with system-config-network
Good luck,
-Cam
Great suggestion. This got me headed down the right path, but I needed to do a couple extra things to get up and running.
For any other folks in my situation (upgraded from FC1 to FC2, having used prism2 rpms from http://prism2.unixguru.raleigh.nc.us on FC1), here's what worked for me: 1. Boot my laptop with wireless card removed 2. Comment out "alias wlan0 prism2_cs" entries in /etc/modprobe.conf and /etc/modules.conf 3. Delete wireless card entries from system-config-network 4. Remove the prism2 rpms from my system 4a. rpm -qa | grep wlan 4b. rpm -e kernel-wlan-ng-0.2.1-pre14 kernel-wlan-ng-pcmcia kernel-wlan-ng-modules-fc1.1.2174-0.2.1-pre14 kernel-wlan-ng-modules-fc1.1.2188-0.2.1-pre14 5. Reboot 6. Once logged in, bring up a tail on /var/log/messages ("tail -f /var/log/messages") 7. Insert wireless card & verify the card is detected (should see a line show up in /var/log/messages like "May 30 13:20:18 hostname cardmgr[2584]: socket 0: Linksys WPC11 11Mbps 802.11b WLAN Card") 8. start system-config-network and create a new wireless device of type orinoco_cs. Configure the device as appropriate for your network. 9. Reboot 10. Enjoy your wireless
Hope this helps. -dave