Yum is updating my original kernel:
title Fedora Core-up (2.6.9-1.667) root (hd0,2) kernel /boot/vmlinuz-2.6.9-1.667 ro root=LABEL=/1 rhgb quiet initrd /boot/initrd-2.6.9-1.667.img
I can't boot from any of the updates. I can I resolve this?
$dmesg > dmesg.dump:
Linux version 2.6.9-1.667smp (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 SMP Tue Nov 2 14:59:52 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000047ff0000 (usable) BIOS-e820: 0000000047ff0000 - 0000000047ffec00 (ACPI data) BIOS-e820: 0000000047ffec00 - 0000000047fff000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 1151MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 294896 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 290800 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 DELL ) @ 0x000fdc60 ACPI: RSDT (v001 DELL PE1600SC 0x00000001 MSFT 0x0100000a) @ 0x000fdc74 ACPI: FADT (v001 DELL PE1600SC 0x00000001 MSFT 0x0100000a) @ 0x000fdca4 ACPI: MADT (v001 DELL PE1600SC 0x00000001 MSFT 0x0100000a) @ 0x000fdd18 ACPI: SPCR (v001 DELL PE1600SC 0x00000001 MSFT 0x0100000a) @ 0x000fdda0 ACPI: DSDT (v001 DELL PE1600SC 0x00000001 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47 ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: ro root=LABEL=/1 rhgb quiet mapped 4G/4G trampoline to fffec000. Initializing CPU#0 CPU 0 irqstacks, hard=023ce000 soft=023ae000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2792.432 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1163036k/1179584k available (1772k kernel code, 15820k reserved, 736k data, 184k init, 0k highmem) Calibrating delay loop... 5505.02 BogoMIPS (lpj=2752512) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 per-CPU timeslice cutoff: 1462.55 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=023cf000 soft=023af000 Initializing CPU#1 Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Booting processor 2/2 eip 3000 CPU 2 irqstacks, hard=023d0000 soft=023b0000 Initializing CPU#2 Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Booting processor 3/3 eip 3000 CPU 3 irqstacks, hard=023d1000 soft=023b1000 Initializing CPU#3 Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Total of 4 processors activated (22216.70 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 494k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfc6ee, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (00:01) PCI: Probing PCI hardware (bus 01) ACPI: PCI Interrupt Routing Table [_SB_.PCI1._PRT] ACPI: PCI Root Bridge [PCI2] (00:02) PCI: Probing PCI hardware (bus 02) ACPI: PCI Interrupt Routing Table [_SB_.PCI2._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 *10 11 12 14) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 *5 6 7 10 11 12 14) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 25 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 29 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 201 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1124736648.4294965499:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6ECDA687281A73E5 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 25 (level, low) -> IRQ 185 ttyS4 at I/O 0xeca8 (irq = 185) is a 16550A ttyS5 at I/O 0xec98 (irq = 185) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... ide0: Wait for ready failed before probe ! Probing IDE interface ide1... hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive hdd: SONY CD-RW CRX175A1, ATAPI CD/DVD-ROM drive hdc: Disabling (U)DMA for SAMSUNG CD-ROM SC-148C (blacklisted) Using cfq io scheduler ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... ide0: Wait for ready failed before probe ! Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hdc: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Logitech Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 43690) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S4 S5) ACPI wakeup devices: PCI0 RTC NIC PCI1 PCI2 Freeing unused kernel memory: 184k freed SCSI subsystem initialized Fusion MPT base driver 3.01.16 Copyright (c) 1999-2004 LSI Logic Corporation ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 29 (level, low) -> IRQ 193 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.01.16 scsi0 : ioc0: LSI53C1030, FwRev=01000c00h, Ports=1, MaxQ=255, IRQ=193 3ware Storage Controller device driver for Linux v1.26.00.039. ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 201 scsi1 : Found a 3ware Storage Controller at 0xd8f0, IRQ: 201, P-chip: 1.3 scsi1 : 3ware Storage Controller Vendor: 3ware Model: Logical Disk 0 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 156247952 512-byte hdwr sectors (79999 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-1.667smp Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 e1000: Ignoring new-style parameters in presence of obsolete ones Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection divert: allocating divert_blk for eth0 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: irq 11, pci mem 4a81c000 ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] EXT3 FS on sda3, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 522104k swap on /dev/sda2. Priority:-1 extents:1 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex NET: Registered protocol family 10 Disabled Privacy Extensions on device 02326ce0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ip_tables: (C) 2000-2002 Netfilter core team i2c /dev entries driver eth0: no IPv6 routers present loop: loaded (max 8 devices)