Am 19.07.2017 um 19:02 schrieb Andreas Reschke:
Am 19.07.2017 um 18:11 schrieb Peter Robinson:
--- cut ---
Stop at the same line:
U-Boot 2016.05 (May 30 2016 - 20:03:50 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
896 bytes read in 12 ms (72.3 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Ignoring unknown command: default=Fedora
Fedora-Mate-armhfp-24-1.2 Boot Options.
1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six)
2: Fedora (4.6.5-300.fc24.armv7hl) 24 (Twenty Four)
Enter choice: 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six)
Retrieving file: /initramfs-4.11.10-300.fc26.armv7hl.img
54912569 bytes read in 5169 ms (10.1 MiB/s)
Retrieving file: /vmlinuz-4.11.10-300.fc26.armv7hl
6267464 bytes read in 592 ms (10.1 MiB/s)
append: ro root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202
LANG=en_US.UTF-8 enforcing=1 console=ttySAC2,115200 console=tty0
Retrieving file: /dtb-4.11.10-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 895 ms (59.6 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa248 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cba1000, end 4ffff639 ... OK
Loading Device Tree to 4cb90000, end 4cba069c ... OK
Starting kernel ...
......
[ 6.013567] NET: Registered protocol family 10
Fan is running, no more output
Port/connector: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
All installations on all my ARM boards I#ve done with adapter with out
any problems.
Andreas
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
Peter
Any tipps and tricks?
A fresh installation with fedora-arm-image-installer didn't work because
of the disc layout. Begin at 3072 is necessary because u-boot install
script to install u-boot.bin makes the the boot partition unreadable if
you use either the Fedora install script.
Thanks
Andreas