On Fri, May 10, 2013 at 5:08 AM, David A. Marlin <dmarlin(a)redhat.com> wrote:
On 05/09/2013 04:28 PM, Dennis Gilmore wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi all,
>
> there is a Release Candidate compose for Alpha at
>
http://armpkgs.fedoraproject.org/mash/stage/19-Alpha-RC5/
>
> there is a install tree as well as a image, the image is a minimal
> install. it has all 3 kernels installed, kernel, kernel-lpae, and
> kernel-tegra. to install to a sdcard run xzcat <image> > <sdcard> it
> does not have boot.scr setup
>
> as an example to boot on a trimslice you would put something like
>
> setenv bootargs cma=64M root=LABEL=_/ ro rhgb console=ttyS0,115200
> ext2load mmc 0:1 5880000 vmlinuz-3.9.0-301.fc19.armv7hl.tegra
> ext2load mmc 0:1 4080000 uImage-3.9.0-301.fc19.armv7hl.tegra
> ext2load mmc 0:1 4000000
> dtb-3.9.0-301.fc19.armv7hl.tegra/tegra20-trimslice.dtb
> bootz 4080000 5880000 4000000
>
> in a boot.scr.in file in the first partition then run "mkimage -A arm
> - -O linux -a 0 -e 0 -T script -C none -n "Fedora Boot Script" -d
> boot.scr.in boot.scr"
>
> i have tested it on a trimslice
Is there any special U-Boot version requirement for Trim Slice, and if so,
what version(s)?
The version with DTB as has been the case for all kernels 3.7+
Also, will this image work for OMAP, and if so, are there any
special
instructions for Panda?
Not sure that it has the vfat partition so likely not.
Peter